Cressi Bluetooth Interface User manual

[
]
BLUETOOTH
INTERFACE
GUIDE
DOWNLOAD THE COMPLETE
CRESSIINSTRUCTIONMANUAL
at: www.cressi.com/manuals
LONG LIFE
BATTERY
HIGH CONTRAST
DISPLAY
WIDE DIAMETER
DISPLAY
EASY ACCESS MULTI MODE
35

PACK CONTENTS
- One Bluetooth Interface
- One 3V CR2430 battery
- One instructions manual.
GENERAL WARNINGS
- Do not leave any ackaging materials ( lastic bags,
cardboard boxes, etc.) within the reach of children as
these can be hazardous.
- Before using the device, make sure that no roducts or
com onents are damaged. If it is damaged, do not use the
device and contact a qualified technician or your dealer.
- Do not try to re air the roduct but contact the Customer
Service of Cressi
- Contact skilled technical ersonnel or Cressi Customer
Service in the event of failure.
- To revent risk of overheating, kee the Interface away
from sources of heat, such as heaters, thermostats, stoves,
cookers, etc.
- The battery must always be re laced by adults only and
with other batteries having the same characteristics as
those indicated in these instructions.
- Dis ose of used batteries in com liance with existing
regulations. Im ro er use of the battery may cause
fires, ex losions or other hazardous events.
- Danger of ingestion: the battery must be re-
laced by an adult in a lace out of reach of
children.
- Do not short circuit feed clam s.
- Always remove flat batteries from the roduct
to avoid damages to the roduct by ossible leakage.
- Do not use rechargeable batteries.
Technical data:
System Requirements:
- Android: com atibility with OS 5.0 and higher
- iOS: com atibility with OS 10.0 and higher
- Communication Technology: Bluetooth Low Energy
- Frequency band: 2.4-2.485GHz
- Transmission ower: 2.51mW
- Power: Dis osable and non-rechargeable 3V , CR2430
battery
- O erating tem erature: -10 °C + 45 °C
CRESSI BLUETOOTH INTERFACE

SYMBOLS KEY
Instructions
WARNING!Im
o er use may create
hazardous conditions.
WARNING.
Read the instructions for use.
THIS PRODUCT COMPLIES WITH EU
DIRECTI E 2012/19/EC.
The crossed bin symbol on the a liance
indicates that the roduct, at the end of its
life, must be dis osed of se arately from
domestic waste, either by taking it to a
se arate waste dis osal site for electric and
electronic a liances or by returning it to
your dealer when you buy another similar
a liance. The user is res onsible for taking
the a liance to a s ecial waste dis osal site
at the end of its life.
If the disused a liance is collected
correctly as se arate waste, it can be
recycled, treated and dis osed of
ecologically; this avoids a negative im act
on both the environment and health, and
contributes towards the recycling of the
roduct’s materials. For further information
regarding the waste dis osal services
available, contact your local waste dis osal
agency or the sho where you bought the
a liance.
THIS PRODUCT COMPLIES WITH EU
DIRECTI E 2006/66/EC AS AMENDED.
The crossed-out wheeled bin symbol on
the battery or its ackaging, means that
the batteries, at the end of their life,
should be dis osed of se arately from the
munici al waste stream via designated
collection facilities a oint- ed by the
government or the local authorities, or
otherwise returned to the dealer when
urchasing new equivalent rechargeable or
non-rechargeable batteries. Chemical
symbols (Hg for mercury, Cd for cadmium,
Pb for lead) rinted beneath the crossed-
out wheeled bin symbol indicate the ty e of
substance contained in the battery. The
user is res onsible for taking the batteries
to s ecial waste dis osal sites at the end of
their life to allow for their rocessing and
recycling.
The correct dis osal of your old toy will
CRESSI BLUETOOTH INTERFACE

hel revent otential negative
consequences for the environment and
human health and favor the recycling of
the materials of which the roduct is
made. Im ro er dis osal of the roduct by
the user may harm the environment and
human health. For further information
regarding the waste dis osal services
available, contact your local waste dis osal
agency or the sho where you bought the
a liance.
DECLARATION OF COMPLIANCE
Cressi Sub hereby declares that this
roduct is in conformity with the essential
requirements and the related dis ositions
established by directive 2014/53/UE. A
co y of the com lete Declaration of
Com liance can be consulted at:
www.cressi.com.
In accordance with the Euro ean
Commission Decision N°2000/299/EC
dated 06/04/2000, the frequency band
used by this roduct has been harmonized
for all EU Countries and therefore this is a
Class 1 roduct which can be used in all
Euro ean Community Countries.
Cressi Sub reserves the right to change
information rovided in this manual at any
time and without notice.
The re roduction, transmission,
transcri tion or translation into another
language, of any art and in any form of
this manual is strictly rohibited without
rior written consent from Cressi Sub.
FCC Notice
This device com lies with Part 15 of the
FCC rules subject to the following two
conditions:
1) This device may not cause harmful
interference
2) This device must acce t all interference
received, including interference that may
cause undesired o eration.
CRESSI BLUETOOTH INTERFACE

FCC STATEMENT
NOTE: This equi ment has been tested
and found to com ly with the limits for a
Class B digital device, ursuant to art 15
of the FCC Rules. These limits are designed
to rovide reasonable rotection against
harmful interference in a residential
installation. This equi ment generates,
uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur
in a articular installation. If this
equi ment does cause harmful
interference to radio or television
television rece tion, which can be
determined by turning the equi ment off
and on, the user is encouraged to try to
correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the se aration between the
equi ment and receiver.
- Connect the equi ment into an outlet on a
circuit different from that to which the
receiver is connected.
- Consult the dealer or an ex erienced
radio/TV technician for hel .
- Changes or modifications not ex ressly
a roved by the arty res onsible for
com liance could void the user's authority to
o erate the equi ment
WARRANTY
The roduct is guaranteed against any
conformity defect in normal conditions of
use as rovided for by the instructions for
use.
The warranty shall not therefore a ly in
the case of damages caused by im ro er
use, wear or accidental events.
For the duration of warranty on
conformity defects lease refer to the
s ecific rovisions of national laws
a licable in the country of urchase,
where rovided.
(Cressi Sub declares the duration of the
guarantee in two years).
CRESSI BLUETOOTH INTERFACE

Image 1
The Cressi BT Interface is a device able to
connect to your smart hone via BT or USB to
download the data related to your diving
(Image 1).
1: Power on button, ress it to activate the
Interface.
2: Green led, it blinks when the Interface is
on (every 3 seconds, 100 ms on).
3: Red led, re resents the Interface activity
in three different ways.
•Case 1: waiting for connection
(every second, 100 ms on)
•Case 2: data download via BT
(every 2,5 s, 100 ms on)
•Case 3: data download via USB
(always on)
CRESSI BLUETOOTH INTERFACE
1
1
1
2
1
3

Image 2
Download the APP Cressi from A le Store
or Google Store and install it on your
smart hone.
Put your Interface on your clock to
recognize it by the InfraRed sensor (see
Image 2).
Follow all the instructions to download your
data.
CRESSI BLUETOOTH INTERFACE

Note:

Via G. Adamoli, 501 - 16165 GENOVA - ITALY
TEL. [phone] - FAX [phone]
[email protected] - www.cressi.com
REV. 08_2019