NC-NXS Full NexSys®Functions & Control
Product Information
The NC-NXS is the ‘central’ NexSys interface module that supports all
NexSys functions, including Load, AC and Line-Level Output Audio
Return Monitoring, Amplifier ID, Module ID, and NexSys-initiated
Sequential Turn-On/Off. It fits in the Network bay located on the rear
panel of Crest Audio CKS, CKV & CKX Series Power Processing
amplifiers.
The NC-NXS requires both an NC-IPN (or any other programmable
Input Processor NC Module) and a compatible Power/Output NC
Module. Connection to the NexSys data bus is via two 5mm three-pin
Phoenix connector. Data bus address selection is via two recessed rotary
switches. A Data LED indicates data signal presence.
Firmware is upgradable thru the NexSys system.
Architects and Engineers Specifications - NC-NXS.
The module shall plug into Crest Audio CKS or CKV Power Processing amplifiers in the
Network bay. The module shall provide a 5mm 3-pin Phoenix connector for connection to a
NexSys data bus and another for “daisy-chaining” to other amplifiers. Two rotary switches
shall assign the module a NexSys data bus address.
A green LED shall indicate when data is being sent from or received by the module. The
module shall require a Power/Output module which, by definition, provides the power sup-
ply required for the Network module. The module shall be fully compatible with NC-STI,
NC-SAC, and NC-SLM Power/Output modules. The module shall be designated the Crest
Audio model NC-NXS.
NETWORK MODULE
FOR CKS, CKV & CKX SERIES
POWER PROCESSING AMPLIFIERS
Output
A
B
+
+
–
–Signal
Ground
Lift
Jumper
CLASS 2
WIRING MAY
BE USED
8
1
9
2
A
3
B
4
C
5
D
6
E
7
F
8
1
9
2
A
3
B
4
C
5
D
6
E
7
F
Model
Name
CKS 100
CKS 200
CKS 400
CKS 800
CKS 800-2
CKS 1200-2
CKS 1600-2
Output Power
@8Ω/Ch.
50W
100W
200W
400W
400W
600W
800W
Model
NC-NXS
Hi
Data
Lo
Crest Audio Inc.
100 Eisenhower Dr.
Paramus, New Jersey 07652 USA
Designed & manufactured in the USA by:
Network
+– +–
Address
Model
Name
CKV 100
CKV 200
CKV 400
CKV 800
CKV 1600
CKV 2400
Output Power
@70.7V
50W
100W
200W
400W
800W
1200W
N-Coder
Data
Port
NexSys Bus
+
--
+
--
Features
• Microprocessor-based NexSys network interface • Provides for all NexSys functions
• NexSys-downloadable firmware permits easy future upgrade path • Data signal present LED
• Twisted-pair data bus connection via two 5mm 3-pin Phoenix connectors • Monitoring of amplifier status
• Level, load and line monitoring • Computer sequential turn-on/off (STO) control
NC-NXS connections
Power
Processing
Modules
