Crestron AirMedia Series 3 User manual

The AirMedia® Series 3 Receiver 100 (AM-3100-WF and AM-3100-WF-I)
enables secure wireless collaboration in the modern digital workspace.
Easy to deploy and manage, install the Receiver in conference rooms,
huddle rooms, lounges, lobbies, or almost any space to establish a
productive meeting environment.
In the Box
1 AirMedia Series 3 Receiver
(AM-3100-WF,6511540 or AM-3100-WF-I,6511541)
Additional Items
2 Anchor, Wall, Plastic (2057414)
2 Screw, Metal, 1.18 in. (30 mm) (2057420)
Install the Device
The device can be placed or mounted onto a flat surface.
Place onto a Flat Surface
Place the device onto any flat, level surface. The rubber strips on the
bottom of the device prevent it from moving easily.
Mount onto a Flat Surface
Using the included mounting screws and anchors, mount the device onto
a flat surface such as a wall or the underside of a table. Use the
mounting template on the following page to determine the mounting
hole locations.
AM-3100-WF and AM-3100-WF-I QuickStart
AirMedia® Series 3 Receiver 100 with Wi-Fi® Network Connectivity
1

AM-3100-WF and AM-3100-WF-I QuickStart
AirMedia® Series 3 Receiver 100 with Wi-Fi® Network Connectivity
AM-3100-WF and AM-3100-WF-I Mounting Template
2

Make Connections
Make connections to the device as shown in the following diagram.
Rear Panel Connections
NOTES:
lThe device receives power from a Power over Ethernet (PoE+, IEEE 802.3at) connection. It can also receive power from the PW-2412WU power
pack (sold separately).
lPoE-type networks connected to the LAN PoE+ port are for intrabuilding use only. Do not connect this device to lines that run outside of the
building.
3
AM-3100-WF and AM-3100-WF-I QuickStart
AirMedia® Series 3 Receiver 100 with Wi-Fi® Network Connectivity

Configure the Device
Configure the device using the web interface. To access the web
interface, open a web browser and then go to the IP address of the
device. For more details on device configuration, refer to the AirMedia
Series 3 Receivers Product Manual (Doc 9020).
Observe the LED Indicators
Refer to the following table and diagram for information about the LED
indicators on the device.
LED Indicator Color Meaning
Power White Power is being applied to the device. The
device is operational.
Amber Power is being applied to the device. The
device is booting.
Setup White The setup button was pressed.
Online White The device is connected to a Crestron
Control System.
HDMI White A video signal is being transmitted to the
HDMI output.
LAN Indicators
(located on
rear panel)
Green An Ethernet link is established.
Flashing
amber
Data activity is occurring on the Ethernet
link.
LED Indicators - Front Panel
Visit the Product Page
Scan the QR code to visit the product page.
AM-3100-WF
www.crestron.com/model/6511540
AM-3100-WF-I
www.crestron.com/model/6511541
AM-3100-WF and AM-3100-WF-I QuickStart
AirMedia® Series 3 Receiver 100 with Wi-Fi® Network Connectivity
4

Important Safety Instructions
Important Safety Instructions
WARNING: When using this product, basic precautions should always be
followed, including the following:
1. Read these instructions carefully.
2. All cautions and warnings should be followed.
3. The equipment should only be used at maximum 40°C (104°F)
ambient temperature.
4. Opening the equipment could result in electrical shock and should
only be done by qualified service personnel.
5. Protect equipment from humidity.
6. Do not insert foreign objects or liquids into the openings, this could
cause a fire or electrical shock.
7. Do not use chemical detergents to clean the device, use a soft dry
cloth.
8. To avoid damage from electrical peaks unplug the device when it is
not in use.
9. If one of the following situations arise, equipment has to be checked
by qualified service personnel:
lLiquid has penetrated into the equipment.
lEquipment has been exposed to humidity.
lEquipment has been dropped and/or is damaged.
lEquipment has obvious sign of breakage.
lEquipment does not work well or you can not get it working
according to user’s manual.
10. Do not expose the equipment to water or place object filled with
water on top of it.
Instructions importantes
Instructions de sécurité importantes
Les avertissements: concernant l’utilisation de ce produit doivent
toujours être fondés sur les précautions fondamentales, notamment:
1. Lisez attentivement ces notes.
2. Tous les avertissements et avertissements doivent être respectés.
3. L’équipement ne peut être utilisé qu’à une température ambiante
maximale de 40°C (104°F).
4. L’ouverture de l’appareil peut provoquer un choc électrique qui ne
peut être assuré que par un personnel d’entretien qualifié.
5. Empêcher l’humidité du dispositif.
6. Il est interdit d’introduire des objets étrangers ou liquides dans
l’ouverture, faute de quoi cela pourrait provoquer un incendie ou un
choc électrique.
7. Ne pas utiliser d’appareil de nettoyage chimique et utiliser un tissu
sec souple.
8. Pour éviter les dommages de crête électrique, retirez la fiche
d’alimentation lorsque le dispositif n’est pas utilisé.
9. Dans l’un des cas enoncés ci-dessous, le matériel doit être vérifié par
un service qualifié:
lDispositif d’infiltration de liquide.
lL’équipement est exposé à l’humidité.
lMatériel tombé et/ou endommagé.
lL’équipement a été endommagé.
lLe matériel ne fonctionne pas correctement ou ne peut pas
être utilisé conformément au Manuel de l’utilisateur.
10. L’équipement ne doit pas être exposé à l’eau ni être placé sur des
objets remplis d’eau.
5
AM-3100-WF and AM-3100-WF-I QuickStart
AirMedia® Series 3 Receiver 100 with Wi-Fi® Network Connectivity

Additional Information
Original Instructions
The U.S. English version of this document is the original instructions.
All other languages are a translation of the original instructions.
Regulatory Model: M202018001
Crestron product development software is licensed to Crestron dealers and Crestron
Service Providers (CSPs) under a limited nonexclusive, nontransferable Software
Development Tools License Agreement. Crestron product operating system software is
licensed to Crestron dealers, CSPs, and end-users under a separate End-User License
Agreement. Both of these Agreements can be found on the Crestron website at
www.crestron.com/legal/software_license_agreement.
The product warranty can be found at www.crestron.com/warranty.
The specific patents that cover Crestron products are listed at
www.crestron.com/legal/patents.
Certain Crestron products contain open source software. For specific information, visit
www.crestron.com/opensource.
Crestron, the Crestron logo, and AirMedia are either trademarks or registered
trademarks of Crestron Electronics, Inc. in the United States and/or other countries.
HDMI is either a trademark or registered trademark of HDMI Licensing LLC in the United
States and/or other countries. Wi-Fi is either a trademark or registered trademark of
Wi-Fi Alliance in the United States and/or other countries. Other trademarks, registered
trademarks, and trade names may be used in this document to refer to either the
entities claiming the marks and names or their products. Crestron disclaims any
proprietary interest in the marks and names of others. Crestron is not responsible for
errors in typography or photography.
©2021 Crestron Electronics, Inc.
Doc. 8982A
08/02/21
6
AM-3100-WF and AM-3100-WF-I QuickStart
AirMedia® Series 3 Receiver 100 with Wi-Fi® Network Connectivity