Crestron 1 Beyond Automate VX Series User manual

IV-SAM-VXN-1B, IV-SAM-VXP-1B, and
IV-SAM-VXS-1B
1 Beyond Automate™ VX Series
Product Manual
Crestron Electronics, Inc.

The original language version of this document is U.S. English.
All other languages are a translation of the original document.
Crestron product development software is licensed to Crestron dealers and Crestron Service Providers (CSPs) under a
limited nonexclusive, nontransferable Software Development Tools License Agreement. Crestron product operating
system software is licensed to Crestron dealers, CSPs, and end-users under a separate End-User License Agreement.
Both of these Agreements can be found on the Crestron website at www.crestron.com/legal/software_license_
agreement.
The product warranty can be found at www.crestron.com/warranty.
The specific patents that cover Crestron products are listed online at www.crestron.com/legal/patents.
Certain Crestron products contain open source software. For specific information, please visit
www.crestron.com/opensource.
Crestron and the Crestron logo are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United
States and/or other countries. Dante is either a trademark or a registered trademark of Audinate Pty Ltd. in the United
States and/or other countries. Audio Techinica is either a trademark or a registered trademark of Audio-Technica U.S,
Inc in the United States and/or other countires. Biamp and Tesira and either trademarks or registered trademarks of
Biamp Systems, LLC in the United States and/or other countries. Blackmagic is either a trademark or a registered
trademark of Blackmagic Design Pty. Ltd in the United States and/or other countries. Chrome is either a trademark or a
registered trademark of Google, Inc. in the United States and/or other countries. HDMI and the HDMIlogo are either
trademarks or registered trademarks of HDMI Licensing, LLC in the United States and/or other countries. Microsoft
Teams and Windows are either trademarks or registered trademarks of Microsoft Corporation in the United States
and/or other countries. NDI is either a trademark or a registered trademark of NewTek, Inc. in the United States and/or
other countries. Q-SYSis either a trademark or a registered trademark of QSC, LLCin the United States and/or other
countries. Sennheiseris either a trademark or a registered trademark of Sennheiser Electronic GmbH & Co. KG in the
United States and/or other countries. Intellimix and Shure are either trademarks or registered trademarks of Shure
Incorporated in the United States and/or other countries. TAIDEN is either a trademark or registered trademark of
Shenzhen TAIDENIndustrial Co., LTD in the United States and other countries. Wirecast is either a trademark or a
registered trademark of Telestream, LLC in the United States and/or other countries. USB Type-C is either a trademark
or a registered trademark of USB Implementers Forum, Inc. in the United States and/or other countries. DisplayPort is
either a trademark or registered trademark of Video Electronics Standards Association in the United States and/or
other countries. Wi-Fi is either a trademark or registered trademark of Wi-Fi Alliance in the United States and/or other
countries. Yamaha is either a trademark or a registered trademark of Yamaha Corporation of American and Yamaha
Corporation in the United States and other countries. Zoom Rooms is either a trademark or registered trademark of
Zoom Video Communications, Inc. in the United States and/or other countries. Other trademarks, registered
trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names
or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not
responsible for errors in typography or photography.
©2023 Crestron Electronics, Inc.

Contents
Overview 1
Features 2
IV-SAM-VXS-1B Features 3
IV-SAM-VXN-1B Features 5
IV-SAM-VXP-1B Features 7
IV-PROSERVICE-1B Features 9
Physical Description 11
Specifications 13
IV-SAM-VXS-1B Specifications 14
Product Specifications 14
IV-SAM-VXN-1B Specifications 16
Product Specifications 16
IV-SAM-VXP-1B Specifications 18
Product Specifications 18
Installation 20
In the Box 20
Wire the Camera System 20
Connect to the System 21
Configuration 23
Initial Setup 24
Assign Network Interfaces 24
Set Static IPAddresses 24
Use Remote Support 26
Update Firmware 27
Room Designer 29
Access the Web Configuration Interface 29
Floor Plan Upload 33
Upload a Project 33
Configure a Room Designer Project 35
Configuring Camera Devices 52
Configuring Microphone Devices 61
Configuring Virtual Mics and Blocking Zones 70
AutoSwitch Preview 86
System Configuration 93
Access the Web Configuration Interface 93
General Settings 96
Titling Settings 101
Scenario Settings 104
Advanced Settings 105
Product Manual — Doc. 9324F Contents • iii

Admin and User Settings 108
Wirecast Configuration 112
Configure Basic Shots 112
Create Side-by-Side Shots 112
Create Layouts 113
Configure Audio 114
DSP Configuration 114
QSCQ-SYS™Core Configuration for Automate VX 114
Biamp Tesira™ Configuration for Automate VX 133
Shure Intellimix® Room and P300 Configuration for Automate VX 153
Operation 160
Basic Operation 161
Main Menu 161
Layouts Menu 163
Room Configs Menu 164
Cameras Menu 165
Scenarios Menu 166
Camera Setup Tool 167
Resources 171
Crestron Support and Training 171
Product Certificates 171
Related Documentation 171
iv • Contents Product Manual — Doc. 9324F

v • Contents Product Manual — Doc. 9324F

Product Manual — Doc. 9324F IV-SAM-VXN-1B, IV-SAM-VXP-1B, and IV-SAM-VXS-1B • 1
Overview
The 1 Beyond Automate™ VX series provides voice-activated camera switching solutions that bring a full
multicamera studio experience to meetings, town halls, and classrooms. Camera switching and
movement are done automatically based on the active speaking participant. Automate VX comes with
built-in recording and streaming capability along with outputs for video conferencing.
NOTES:
l1 Beyond Automate™ VX models are functionally similar. For simplicity within this
documentation, the term "Automate VX" is used except where otherwise noted.
lThis document is current as of the Automate VXversion 5.12 release.

2 • IV-SAM-VXN-1B, IV-SAM-VXP-1B, and IV-SAM-VXS-1B Product Manual — Doc. 9324F
Features
Refer to the following sections for more information on the 1 Beyond Automate™ VX model features.
lIV-SAM-VXS-1B Features on page 3
lIV-SAM-VXN-1B Features on page 5
lIV-SAM-VXP-1B Features on page 7
lIV-PROSERVICE-1B Features on page 9

Product Manual — Doc. 9324F IV-SAM-VXN-1B, IV-SAM-VXP-1B, and IV-SAM-VXS-1B • 3
IV-SAM-VXS-1B Features
The IV-SAM-VXS-1B Automate™ VX is a voice-activated camera switching solution that brings a full
multicamera studio experience to meetings, town halls, and classrooms. Camera switching and
movement are done automatically based on the active speaking participant. Automate VX comes with
built-in recording and streaming capability along with outputs for video conferencing.
Key features include:
lAutomatic camera switching based on the active speaking participant
lSwitches between multiple cameras for broadcast-style production
lSupports 3 SDI and 5 NDI sources; outputs SDI and NDI streams
lIntelligent video algorithm follows the conversation, avoiding excessive camera switching
lEasy configuration with the browser-based Room Design tool
Professional Services
The 1 Beyond Automate system requires the purchase of 1 Beyond Camera Systems Remote
Professional Services.
An Equipment Proposal issued by the Crestron Sales Support Services team is required before placing
an order for the IV-SAM-VXS-1B Automate™ VX . All orders must reference the Equipment Proposal
number and include the complete camera system outlined in the Equipment Proposal, including
Professional Services.
Visit IV-PROSERVICE-1B for more details.
NOTE: The Equipment Proposal will include the required 1 Beyond cameras, Automate VX system,
and 1 Beyond Camera Systems Remote Professional Services. It will also identify third-party
equipment, such as microphones, which are necessary to complete the system. This equipment must
be purchased separately from the applicable manufacturer based upon the information provided
regarding room size, furniture layout, and design specifics.

4 • IV-SAM-VXN-1B, IV-SAM-VXP-1B, and IV-SAM-VXS-1B Product Manual — Doc. 9324F
Improved Video for Meetings
See who is speaking with close-up camera shots. Clean production-style camera switching provides a
more engaging experience for remote participants or viewers.
Voice-Activated Switching
Hands-free operation uses data from the room microphones to locate the active speaking participant.
Camera switching is determined by the mic type used.
Adapts to Room Sizes and Uses
Cameras can be located throughout the room for best camera angles. Room configurations can be set
to accommodate different furniture layouts with a single button push.
Graphics, Titles, and Layouts
Combine multiple sources, superimpose titles, and add custom graphics. A graphical user interface
allows for custom layouts, and not just picture-in-picture or side-by-side layouts.
Browser or Third-Party Control
Enable auto-switching, record/stream, and change room configurations or layouts using a Crestron®
control module. An adaptable API is available for customizable user-interfaces on third-party control
systems.
Conference, Stream, and/or Record
In addition to high-quality output for hard or soft codecs, the system has a built-in encoder and recorder
to enable multiple live streams and over 100 hours of recording.
Room Designer Web Interface
The Room Designer tool provides the ability to design and configure meeting spaces. The browser
interface is used to help choose the best position for a variety of cameras and microphones within a
room.

Product Manual — Doc. 9324F IV-SAM-VXN-1B, IV-SAM-VXP-1B, and IV-SAM-VXS-1B • 5
IV-SAM-VXN-1B Features
The IV-SAM-VXN-1B Automate™ VX Plus is a voice-activated camera switching solution that brings a
full multicamera studio experience to meetings, town halls, and classrooms. Camera switching and
movement are done automatically based on the active speaking participant. Automate VX comes with
built-in recording and streaming capability along with outputs for video conferencing.
Key features include:
lAutomatic camera switching based on the active speaking participant
lSwitches between multiple cameras for broadcast-style production
lSupports 3 SDI and 12 NDI sources; outputs SDI and NDI streams
lIntelligent video algorithm follows the conversation, avoiding excessive camera switching
lEasy configuration with the browser-based Room Design tool
Professional Services
The 1 Beyond Automate system requires the purchase of 1 Beyond Camera Systems Remote
Professional Services.
An Equipment Proposal issued by the Crestron Sales Support Services team is required before placing
an order for the IV-SAM-VXN-1B Automate™ VX . All orders must reference the Equipment Proposal
number and include the complete camera system outlined in the Equipment Proposal, including
Professional Services.
Visit IV-PROSERVICE-1B for more details.
NOTE: The Equipment Proposal will include the required 1 Beyond cameras, Automate VX system,
and 1 Beyond Camera Systems Remote Professional Services. It will also identify third-party
equipment, such as microphones, which are necessary to complete the system. This equipment must
be purchased separately from the applicable manufacturer based upon the information provided
regarding room size, furniture layout, and design specifics.

6 • IV-SAM-VXN-1B, IV-SAM-VXP-1B, and IV-SAM-VXS-1B Product Manual — Doc. 9324F
Improved Video for Meetings
See who is speaking with close-up camera shots. Clean production-style camera switching provides a
more engaging experience for remote participants or viewers.
Voice-Activated Switching
Hands-free operation uses data from the room microphones to locate the active speaking participant.
Camera switching is determined by the mic type used.
Adapts to Room Sizes and Uses
Cameras can be located throughout the room for best camera angles. Room configurations can be set
to accommodate different furniture layouts with a single button push.
Graphics, Titles, and Layouts
Combine multiple sources, superimpose titles, and add custom graphics. A graphical user interface
allows for custom layouts, and not just picture-in-picture or side-by-side layouts.
RESTful API for Crestron® and Third-Party Control
Enable auto-switching, record/stream, and change room configurations or layouts using a Crestron®
control module. An adaptable API is available for customizable user-interfaces on third-party control
systems.
Conference, Stream, and/or Record
In addition to high-quality output for hard or soft codecs, the system has a built-in encoder and recorder
to enable multiple live streams and over 100 hours of recording.
Room Designer Web Interface
The Room Designer tool provides the ability to design and configure meeting spaces. The browser
interface is used to help choose the best position for a variety of cameras and microphones within a
room.

Product Manual — Doc. 9324F IV-SAM-VXN-1B, IV-SAM-VXP-1B, and IV-SAM-VXS-1B • 7
IV-SAM-VXP-1B Features
The IV-SAM-VXP-1B Automate™ VX Pro is a voice-activated camera switching solution that brings a full
multicamera studio experience to meetings, town halls, and classrooms. Camera switching and
movement are done automatically based on the active speaking participant. Automate VX Pro comes
with built-in recording and streaming capability along with outputs for video conferencing.
Key features include:
lAutomatic camera switching based on the active speaking participant
lSwitches between multiple cameras for broadcast-style production
lSupports 7 SDI and 5 NDI sources; outputs SDI and NDI streams
lIntelligent video algorithm follows the conversation, avoiding excessive camera switching
lEasy configuration with the browser-based Room Design tool
Professional Services
The 1 Beyond Automate system requires the purchase of 1 Beyond Camera Systems Remote
Professional Services.
An Equipment Proposal issued by the Crestron Sales Support Services team is required before placing
an order for the IV-SAM-VXP-1B Automate™ VX Pro. All orders must reference the Equipment Proposal
number and include the complete camera system outlined in the Equipment Proposal, including
Professional Services.
Visit IV-PROSERVICE-1B for more details.
NOTE: The Equipment Proposal will include the required 1 Beyond cameras, Automate VX system,
and 1 Beyond Camera Systems Remote Professional Services. It will also identify third-party
equipment, such as microphones, which are necessary to complete the system. This equipment must
be purchased separately from the applicable manufacturer based upon the information provided
regarding room size, furniture layout, and design specifics.

8 • IV-SAM-VXN-1B, IV-SAM-VXP-1B, and IV-SAM-VXS-1B Product Manual — Doc. 9324F
Improved Video for Meetings
See who is speaking with close-up camera shots. Clean production-style camera switching provides a
more engaging experience for remote participants or viewers.
Voice-Activated Switching
Hands-free operation uses data from the room microphones to locate the active speaking participant.
Camera switching is determined by the mic type used.
Adapts to Room Sizes and Uses
Cameras can be located throughout the room for best camera angles. Room configurations can be set
to accommodate different furniture layouts with a single button push.
Graphics, Titles, and Layouts
Combine multiple sources, superimpose titles, and add custom graphics. A graphical user interface
allows for custom layouts, and not just picture-in-picture or side-by-side layouts.
Browser or Third-Party Control
Enable auto-switching, record/stream, and change room configurations or layouts using a Crestron®
control module. An adaptable API is available for customizable user-interfaces on third-party control
systems.
Conference, Stream, and/or Record
In addition to high-quality output for hard or soft codecs, the system has a built-in encoder and recorder
to enable multiple live streams and over 100 hours of recording.
Room Designer Web Interface
The Room Designer tool provides the ability to design and configure meeting spaces. The browser
interface is used to help choose the best position for a variety of cameras and microphones within a
room.

Product Manual — Doc. 9324F IV-SAM-VXN-1B, IV-SAM-VXP-1B, and IV-SAM-VXS-1B • 9
IV-PROSERVICE-1B Features
1 Beyond Camera Systems Remote Professional Services provide support for commissioning your
Automate™ VX voice-activated camera tracking solution.
The purchase of 1 Beyond Camera Systems Remote Professional Services (IV-PROSERVICE-1B) is
required with the purchase of each Automate™ VX (IV-SAM-VXS-1B) or Automate™ VX Pro (IV-SAM-
VXP-1B) model. 1 Beyond Camera Systems Remote Professional Services is not available for purchase
separately.
Overview
1 Beyond Camera Systems Remote Professional Services provides support for commissioning your
Automate™ VX voice-activated camera tracking solution. An Equipment Proposal issued by Crestron’s
Sales Support Services team is required before placing an order for any Automate VX system. All orders
must reference the Equipment Proposal number and include the complete camera system as set forth in
the Equipment Proposal, including 1 Beyond Camera Systems Remote Professional Services (IV-
PROSERVICE-1B).
NOTE: The Equipment Proposal will include the required 1 Beyond cameras, Automate VX system,
and 1 Beyond Camera Systems Remote Professional Services. It will also identify third-party
equipment, such as microphones, which are necessary to complete the system and must be
purchased separately from the applicable manufacturer based upon the information provided
regarding room size, furniture layout, and design specifics.
For additional information or to request an Equipment Proposal, please contact Sales Support Services.
Refer to your order confirmation for details regarding the scheduling of professional services.
The services included in 1 Beyond Camera Systems Remote Professional Services are described in the
sections that follow.

10 • IV-SAM-VXN-1B, IV-SAM-VXP-1B, and IV-SAM-VXS-1B Product Manual — Doc. 9324F
Preinstallation Support
The Crestron support team will review your proposed installation plan and recommend optimum
placement of the Automate VX system equipment and control panel programming for the Automate VX
or Automate VX Pro camera systems.
The support team will provide an overview of the remote commissioning support process and answer
any questions regarding system configuration and control programming. The support team will also
identify the resources required onsite for commissioning.
Remote Commissioning and Validation
Following installation, the Crestron support team will connect remotely with your onsite team to help
deploy the solution and configure the Automate VX software. The support team accesses the Automate
VX system remotely with your permission and assistance. An experienced and skilled AV technician is
required onsite at this stage, as the support team may require file-system permissions to access the
Automate VX system remotely when deploying hardware and configuring camera tracking.
Once the Automate VX system is installed and configured, the support team will remotely perform a
comprehensive validation of the camera tracking system. The support team will simulate a video
conference call with your on-site technician to validate camera tracking, microphone sensitivity, lip-sync,
API control from your control panel, and all other related functionality. After the successful validation,
the support team will archive your configuration files for future support needs.

Product Manual — Doc. 9324F IV-SAM-VXN-1B, IV-SAM-VXP-1B, and IV-SAM-VXS-1B • 11
Physical Description
The camera switching device provides the following connectors and indicators.
IV-SAM-VXP-1BConnectors and Indicators
IV-SAM-VXN-1BConnectors and Indicators
IV-SAM-VXS-1BConnectors and Indicators
No. Name Description
1 Power ACpower
2 BIOSFlashback Button Not used
3 Wi-Fi Connects the antenna to the onboard Wi-Fi™ network chip
4 HDMI® Not used
5 USB 3.2 Gen 1 2x USBType-A ports for peripheral device connections

12 • IV-SAM-VXN-1B, IV-SAM-VXP-1B, and IV-SAM-VXS-1B Product Manual — Doc. 9324F
No. Name Description
6 Audio Connections Orange:Central/bass speaker out
Blue:Line in
Black:Rear speaker out
Green:Headphone/speaker out
Pink:Microphone in
Optical:Optical SPDIFout
7 NIC 1 1 Gbps RJ-45 Ethernet port
8 USB 3.2 Gen1 USBType-A port for peripheral device connections
9 USB 3.2 Gen2
Thunderbolt™ 4
USB Type-C® port for faster data rates
10 NIC 2 2.5 Gbps RJ-45 Ethernet port
11 USB 3.2 Gen2 USB Type-A port for faster data rates
12 USB 3.2 Gen2 Thunderbolt
4
USB Type-C port for faster data rates
13 USB 3.2 Gen 1 2x USBType-A ports for peripheral device connections
14 SDI(REF) SDIreference port (not used)
15 SDI SDIinputs
IV-SAM-VXS-1B:Equipped with 3 inputs
IV-SAM-VXP-1B:Equipped with 7 inputs, use included mini-DIN to
BNCadapters for camera inputs
IV-SAM-VXN-1B: Equipped with 3 inputs
16 SDI (OUT) SDIvideo program output
17 Mini DisplayPort for
IV-SAM-VXS-1B and
IV-SAM-VXP-1B
Mini DisplayPort™ video connection for a computer monitor output
(setup only)
17 DisplayPort for
IV-SAM-VXN-1B
DisplayPort™ video connection for a computer monitor output (setup
only)

Product Manual — Doc. 9324F IV-SAM-VXN-1B, IV-SAM-VXP-1B, and IV-SAM-VXS-1B • 13
Specifications
Refer to the following sections for more information on the specifications for various 1 Beyond
Automate™ VX models.
lIV-SAM-VXS-1B Specifications on page 14
lIV-SAM-VXN-1B Specifications on page 16
lIV-SAM-VXP-1B Specifications on page 18

14 • IV-SAM-VXN-1B, IV-SAM-VXP-1B, and IV-SAM-VXS-1B Product Manual — Doc. 9324F
IV-SAM-VXS-1B Specifications
Product specifications for the IV-SAM-VXS-1B are provided below.
Product Specifications
Automate VX Capabilities
Titles, Graphics, Layouts Titles, logos, backgrounds can be added, Easy-to-use graphic designer to create any
multi-source layout
Program Record MP4 file (H.264 codec). User-selectable bitrate up to 10 Mbps
Recording Capacity Records to internal 500 GB SSD storage
Streaming Encoder Can stream to any RTMP server. Presets included for popular CDNs
NDI Support For inputs and program output
Camera Control Can control 1 Beyond PTZ cameras (PTZ-12 and PTZ-20) and tracking cameras
(AutoTracker and AutoFramer) over IP
System Control RESTful API over Network (TCP) for third party control
Compatible Codecs Output via HD-SDI (SDI to HDMI® converter included) for connection to external
conferencing codec or via USB adapter to external systems running Microsoft Teams®
software, Zoom Rooms™ software, etc.
Configuration Browser-based configuration with secure log-in and user administration.
Customizable preset options for sleep, wake, and scenario actions
Connectivity
Network Ports 2x RJ-45 Gigabit Ethernet
Video
Video Inputs 3x HD-SDI Inputs
5x NDI Inputs
1x USB Type-A Input
Video Output Up to 1080p60 , 1x HD-SDI (SDI to HDMI® converter included);
NDI|HX and virtual webcam output
Desktop Output 4x Mini DisplayPort™ output for setup and maintenance
Audio
Audio Input 3.5 mm Line In, USB, Dante® input
Compatible Mic Systems For a list of compatible mic systems, refer to OLH Article 1001562.
Compatible DSPs For a list of compatible DSPs, refer to OLH Article 1001563.
Power
Power 400 W, 100–240VAC
Dimensions

Product Manual — Doc. 9324F IV-SAM-VXN-1B, IV-SAM-VXP-1B, and IV-SAM-VXS-1B • 15
Height 3.5 in. (89 mm)
Width 16.75 in. (425 mm)
Depth 14.5 in. (368 mm)
Weight
14 lb (6.35 kg)