Crux Sightline RVCGM-80F User manual

RVCGM-80F
Front & Rear Camera Integration Interface for
Select 2016-2018 GM Vehicles with CUE, Intellilink, & MyLink Systems
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311
phone: [phone] • fax: [phone] • www.cruxinterfacing.com
rev.011420
1 of 8
- Adds front and rear aermarket camera inputs.
- Retains funconality of the OEM backup camera if present.
- Front camera automacally shows on the screen aer changing the gear from reverse to drive.
- Forced view funcon for front camera or aermarket backup camera.
PRODUCT FEATURES:
PARTS INCLUDED:
RVCGM-80F Module RVCGM-80F Power Harness
LVDS Adapter Cable OSD Control Pad

Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311
phone: [phone] • fax: [phone] • www.cruxinterfacing.com
rev.011420
2 of 8
WIRING DIAGRAM:
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
MAIN
RVCGM-80F
Front & Rear Camera Integration Interface
for GM Vehicles with CUE, MyLink & Intellilink
R
INTERFACINGSOLUTIONS
V IDEO
REAR CAMERA
FRONT CAMERA
Front Camera
12V Power & Ground
Rear Camera
12V Power & Ground
OSD
CONTROL
PAD
OSD Control Pad is used to
adjust the settings. Must be
unplugged and stored after.
LVDS
Adapter
Cable
To the LVDS Connector
behind the radio
From the LVDS Connector
behind the radio
To the 10-pin connector
behind the radio
From the 10-pin connector
behind the radio
Fuse
***See Special Note on page 5 regarding LVDS connections on RE models***
Front Camera
Manual Trigger for CUE
Yellow
RVCGM-80F
Front & Rear Camera Integration Interface for
Select 2016-2018 GM Vehicles with CUE, Intellilink, & MyLink Systems
DIP SWITCH SETTINGS:
DIP SETTING VEHICLE
1 to 8 ALL OFF Malibu and Volt
1ON Corvee C7
2ON Escalade, CTS-V
3ON Impala
4ON Cruze (with 8” screen)
5ON Cadillac XT5
6ON Suburban, Tahoe, Yukon, Sierra, Acadia, Silverado, Yukon (with RSE)
7 ON Suburban (with RSE), Tahoe (with RSE)
1 & 5 ON Colorado
2 & 5 ON Escalade, CTS, CTS-V (with no OEM front camera)
Note: ON is down and OFF is up
RSE = Rear Seat Entertainment

Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311
phone: [phone] • fax: [phone] • www.cruxinterfacing.com
rev.011420
3 of 8
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
RVCGM-80F
Front & Rear Camera Integration Interface for
Select 2016-2018 GM Vehicles with CUE, Intellilink, & MyLink Systems
Suburban, Tahoe, Yukon models with Rear Seat
Entertainment Systems have 2 LVDS cables on
the back of the radio.
Plug and play connecons on most applicaons. See wiring
diagram on page 2.
Suburban, Tahoe, Yukon with RSE wiring connecons:
On RE models, the power harness is plugged in behind
the headunit but the LVDS cable is plugged in at the
HMI module (usually found behind the glove box).
Connecon is made on the blue LVDS connector on
the HMI module.

Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311
phone: [phone] • fax: [phone] • www.cruxinterfacing.com
rev.011420
4 of 8
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
RVCGM-80F
Front & Rear Camera Integration Interface for
Select 2016-2018 GM Vehicles with CUE, Intellilink, & MyLink Systems
SPECIAL NOTE:
On Suburban, Tahoe, Yukon models with Rear Seat Entertainment Systems, the LVDS cable connecon on
the RVCGM-80F LVDS adapter board is the opposite of the standard connecon. Please take note of this
when plugging in the LVDS connectors. See image below.
RVCGM-80F
LVDS OUT
OEM
Cable
Escalade and Corvee C7 Wiring Connecons:
For Cadillac and Corvee installaons, you must cut the RVCGM-80F 10 pin connectors and hardwire it to the
OEM connector wires.
RVCGM-80F POWER HARNESS
White LIN Bus
Blue/White MMI
Brown/White CAN
Red +12V Constant
Black Ground

Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311
phone: [phone] • fax: [phone] • www.cruxinterfacing.com
rev.011420
5 of 8
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
RVCGM-80F
Front & Rear Camera Integration Interface for
Select 2016-2018 GM Vehicles with CUE, Intellilink, & MyLink Systems
Corvee C7 Wiring Connecons:
Cadillac Escalade & CTS-V Wiring Connecons:
RVCGM-81F Power Harness 30-pin connector
OEM Cadillac Connector
OEM CCONNECTOR RVCGM-80F POWER HARNESS
Pin 6 LIN Touch Pin 6
Pin 7 LIN Buon (MMI) Pin 8
Pin 9 +12V Constant Pin 3
Pin 12 CAN B High Pin 16
Pin 16 Ground Pin 4
115
16 30

Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311
phone: [phone] • fax: [phone] • www.cruxinterfacing.com
rev.011420
6 of 8
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
RVCGM-80F
Front & Rear Camera Integration Interface for
Select 2016-2018 GM Vehicles with CUE, Intellilink, & MyLink Systems
FORCE VIEWING THE FRONT CAMERA:
Press for 2 seconds = Force view front camera
Press once = Back to OEM screen
For Cadillac CUE radios:
For MyLink IO5/IO6 radios:
For the CUE radios, you need to connect the yellow wire (Front Camera Manual Trigger) on the
RVCGM-80F power harness to +12V in order to force view the front camera on the screen. Use
a toggle switch (not included) to enable/disable the front camera forced view feature.
OSD Control Pad
The OSD Seng Screen automacally pops up when the OSD Control Pad is connected.
ON SCREEN DISPLAY (OSD) SETTINGS:

Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311
phone: [phone] • fax: [phone] • www.cruxinterfacing.com
rev.011420
7 of 8
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
RVCGM-80F
Front & Rear Camera Integration Interface for
Select 2016-2018 GM Vehicles with CUE, Intellilink, & MyLink Systems
Use the OSD menu to make the necessary sengs. Remember to Run Save&Reboot aer the sengs are
made. Unplug the OSD Control Pad aer seng the cameras and keep it in a secure locaon in case it is
needed to change the sengs.
REAR AND FRONT CAMERA SETTING
Dynamic Parking Guide Lines
To turn ON the Dynamic Parking Guide Lines, go the Rear Input > Rear Set and turn ON Warning LANG.
Go back to the root menu and Run Save&Reboot. Remember to unplug the OSD Control Pad otherwise
the unit will not funcon properly. Set the parking brake on, start the car, put the gear in reverse, turn the
steering wheel all the way to the le and all the way to right then put it in the center. The RVCGM-80F will
calibrate automacally.

Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311
phone: [phone] • fax: [phone] • www.cruxinterfacing.com
rev.011420
8 of 8
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
RVCGM-80F
Front & Rear Camera Integration Interface for
Select 2016-2018 GM Vehicles with CUE, Intellilink, & MyLink Systems
VEHICLE APPLICATIONS:
Compable with 8” CUE, MyLink IO5/IO6, Intellilink Systems.
BUICK
2014 - 2018 LaCrosse
CHEVROLET
2014 - 2018
2013 - 2017
2015 - 2018
2014 - 2017
2015 - 2018
2016 - 2018
2014 - 2018
2014 - 2018
2015 - 2018
2015 - 2018
Avalanche
Colorado
Corvee C7
Cruze
Malibu
Impala
Silverado
Suburban
Tahoe
Volt
GMC
2017 - 2018
2015 - 2018
2014 - 2018
2014 - 2018
Acadia
Canyon
Sierra
Yukon
CADILLAC
2013 - 2018
2014 - 2018
2015 - 2018
2013 - 2018
2014 - 2018
2016 - 2018
ATS
CTS, CTS Coupe, CTS-V
Escalade
SRX
XTS
XT5
8” Screen
FRONT CAMERA SETTING
The front Camera will automacally show on the screen when the gear is put to Drive from Reverse. Set the delay
me on the OSD menu. Delay me can be set from 1 to 60 seconds aer a pung the car to drive from reverse.