Cub Cadet CCU410 User manual

Power LokTM Drive Unit
CCU410
Instruction Manual
PRODUCT SPECIFICATIONS
Weight: (without Power Cell) 6 Lbs
Weight: (with Power Cell) 9 Lbs
Need Assistance?
For assistance regarding the assembly, operation or maintenance
of the unit, please call 1-877-282-8684 (in the United States) or
1-800-668-1238 (in Canada). Additional information can be
found at www.cubcadet.com (in the United States) or
www.cubcadet.ca (in Canada).
BC
769-11432 / 00 01/16
NOTE: This unit can be used with various optional attachments, which are sold
separately.

2
TABLE OF CONTENTS
Product specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
General safety warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
General power tool safety warnings . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
Specific safety rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8
Power Cell and charger safety instructions . . . . . . . . . . . . . . . . . . . 9–11
Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Know Your Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Assembly and operating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14–15
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-17
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . *
* Please refer to the separate Warranty Supplement.

3
GENERAL SAFETY WARNINGS
CAUTION: Before using this tool or any of its accessories, read this
manual and follow all Safety Rules and Operating Instructions.
This instruction manual includes the following:
• General Safety Rules
• Specific Safety Rules and Symbols
• Functional Description
• Assembly
• Operation
• Maintenance
• Accessories
WARNING: Retain this manual for future reference.
Provide this manual to all operators and be certain that they have
read and understand all the Safety Rules and Operating Instructions prior
to their using this tool.
EYE AND FACIAL PROTECTION
ALWAYS WEAR EYE PROTECTION THAT CONFORMS WITH
THE MOST RECENT ANSI Z87.1 or CAN/CSA – Z94.3 SAFETY
STANDARDS.
FLYING DEBRIS can cause permanent eye damage. Prescription
eyeglasses ARE NOT a replacement for proper eye protection. The
usage of a safety standard compliant face shield placed over
proper safety glasses or goggles can reduce the risk of facial injury.
WARNING: Non-compliant eyewear can cause serious injury
if broken during the operation of a power tool.

4
Please register your product online at www.cubcadet.com (in the United
States) or www.cubcadet.ca (in Canada).
WARNING: To avoid electrical hazards, fire hazards or damage to
the tool, use proper circuit protection.
The charger for this tool is wired at the factory for 120 V operation. It must be
connected to a 120 V, 15 A circuit that is protected by a time-delayed fuse or
circuit breaker. To avoid shock or fire, replace the power cord immediately if it is
worn, cut or damaged in any way.
OWNER’S REGISTRATION
ELECTRICAL SAFETY
HEARING PROTECTION
WARNING: Use hearing protection if the surrounding
environment of the area of operation is loud.
BODY PROTECTION
WARNING: Always wear non-slip gloves that fit properly to
protect your hands and to help you grip the tool.
WARNING: Always wear sturdy clothing with long sleeves
and long pants. Never operate the tool while wearing shorts,
short sleeve shirt or while shirtless.
WARNING: Always wear non-slip safety boots to prevent foot
injuries and slipping that could cause loss of control of the tool.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
GENERAL SAFETY WARNINGS

5
GENERAL POWER TOOL SAFETY WARNINGS
GENERAL POWER TOOL SAFETY
WARNINGS
WARNING: Read all safety
warnings and all instructions. Failure
to follow the warnings and instructions
may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for
future reference.
General Power Tool Safety
Warnings – Work Area Safety
Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
Do not operate power tools in
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust. Power tools create
sparks which may ignite the liquids,
fumes or dust.
Keep children and bystanders away
while operating a power tool.
Distractions can cause you to lose
control.
General Power Tool Safety
Warnings – Electrical Safety
Charger plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with
earthed (grounded) chargers.
Unmodified plugs and matching outlets
will reduce risk of electric shock.
Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electrical
shock if your body is earthed or grounded.
Do not expose power tools, chargers
or Power Cells to rain or wet
conditions. Water entering the tool,
chargers or Power Cells will increase
the risk of electric shock.
Do not abuse the cord. Never use the
power cord for carrying, pulling or
unplugging the charger. Keep the
power cord away from heat, oil, sharp
edges, and moving parts. Damaged or
entangled cords increase the risk of
electric shock.
When operating a charger outdoors,
use an extension cord suitable for
outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric
shock.
If operating a charger in a damp
location is unavoidable, use a
residual current device (RCD)
protected supply. An RCD is also
known as a ground fault circuit
interrupter (GFCI) or earth leakage
circuit breaker (ELCB). Use of an RCD
reduces the risk of electric shock.
General Power Tool Safety
Warnings – Personal Safety
Stay alert, be aware of your
surroundings, watch what you are
doing and use common sense when
operating a power tool. Do not use a
power tool while you are tired or
under the influence of drugs, alcohol,
or medication. A moment of inattention
while operating a power tool may result
in serious personal injury.

6
GENERAL POWER TOOL SAFETY WARNINGS
Use personal protective equipment.
Always wear eye protection.
Protective equipment such as dust
mask, non-skid safety shoes or boots,
sturdy gloves, durable long pants and
durable long sleeve shirt, [and hard hat,
or hearing protection used for
appropriate conditions] will reduce
personal injuries.
Prevent unintentional starting. Ensure
the trigger switches are in the off-
position before connecting the Power
Cell to the power tool, and never pick
up or carry the tool by the trigger
switches. Carrying power tools with
your finger on the switch or energizing
power tools that have the switch on
invites accidents.
Remove any adjustment key or
wrench before turning the power tool
on. A wrench or a key left attached to a
rotating part of the power tool may
result in personal injury.
Do not overreach. Keep proper
footing and balance at all times. This
enables better control of the power tool
in unexpected situations.
Dress properly. Do not wear loose
clothing or jewelry. Keep your hair,
clothing and gloves away from moving
parts. Loose clothing, jewelry or long
hair can be caught in moving parts.
General Power Tool Safety
Warnings – Power tool use and
care
Do not force the tool. Use the correct
tool for the application. The correct
power tool will do the job better and
safer when used at the rate for which it
was designed.
Do not use a power tool if the switch
does not turn it on or off. Any power tool
that cannot be controlled using the switch
is dangerous and must be repaired.
Remove the Power Cell before making
any adjustments, replacing or repairing
parts, cleaning the tool, leaving the tool
idle or unattended, transporting or
storing the tool. Such preventive safety
measures reduce the risk of starting the
power tool accidentally.
Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands
of untrained users.
Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool’s operation. If damaged,
have the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
Use the power tool and accessories
in accordance with these instructions,
taking into account the working
conditions and the work to be
performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
General Power Tool Safety
Warnings – Service
Have your power tool or charger
serviced by a qualified repair person
using only identical replacement
parts. This will ensure that the safety of
the power tool or charger is maintained.

7
SPECIFIC SAFETY RULES
WARNING: Know
your Power Lok™ Drive
Unit. Do not install an
accessory, plug in the
charger or install the Power Cell into
the tool until you have read and
understand this Instruction Manual.
Learn the tool’s applications and
limitations, as well as the general and
specific potential hazards related to
this tool. Following these instructions
will reduce the risk of electric shock, fire
or serious injury.
WARNING: Always
wear appropriate eye
protection. Any power tool
can throw foreign objects into your eyes
and cause permanent eye damage.
ALWAYS wear appropriate safety
goggles or properly fitted safety glasses
that comply with OSHA standards and
the most recent version of ANSI Z87.1
or CAN/CSA – Z94.3 safety standards
[or other applicable national standard].
Ordinary vision or sun glasses generally
do not provide adequate impact or side
shield / wrap around penetration
protection. Ordinary glasses ARE NOT
safety glasses. To reduce the risk of
injury to your face, also wear a face
shield or face screen over your safety
goggles or safety glasses.
WARNING: Glasses, goggles or face
shields not in compliance with ANSI
Z87.1 or CAN/CSA – Z94.3 could
cause serious injury if they break
upon impact.
WARNING: Prevent
foot injuries! Never operate
when barefoot, or wearing
open toed shoes, or sandals.
Always, wear sturdy protective shoes or
boots with non-slip soles when
operating the tool. Steel-toed safety
boots are recommended.
WARNING: Protect
your hands by wearing heavy-
duty, non-slip gloves and to
improve your grip and control when
handling the tool.
WARNING: Clothing must be
durable and snug-fitting, yet allow for
freedom of movement. Avoid loose
clothing such as scarves, neckties,
jewelry, flared or cuffed pants, loose-
fitting shirts or jackets, unconfined long
hair or anything that can get caught in
brush or branches, or become
entangled in the tool. Secure hair to
above shoulder level. Wear long pants
of durable material to protect your legs.
Cover as much of your body as
possible to help protect you from debris
and pieces of toxic and allergenic plants
being thrown by the tool.

8
SPECIFIC SAFETY RULES
WARNING: Use
hearing protection. Use
hearing protection (e.g. ear
plugs or ear mufflers) to
protect your hearing, particularly if the
tool is used for extensive periods or if the
surrounding environment of operation
exposes the operator to loud noises.
When wearing hearing protection, you
will have impaired ability to hear alarms,
warnings and shouts from approaching
people or approaching vehicles. Be extra
diligent and observant of hazards and
bystanders when wearing hearing
protection devices. When someone
approaches, turn the tool OFF
immediately.
WARNING: Always wear
breathing protection when operating the
tool. Bystanders should be encouraged
to wear breathing protection devices
even if they are kept at a distance as
hazardous dust can travel considerable
distances, especially if the dust is wind
blown.
WARNING: Dust created by use
of this product may contain
chemicals known to the State of
California and medical experts to
cause cancer, respiratory injuries,
birth defects or other reproductive
harm. Some examples of these
chemicals are:
• Compounds in fertilizers
• Compounds in insecticides,
herbicides and pesticides
• Arsenic and chromium from
chemically treated lumber.
• Commercial and household
chemicals.
To reduce your exposure to these
chemicals, wear approved safety
equipment such as dust and / or vapor
masks that are specifically designed to
filter out microscopic particles or
gaseous components. Additionally, dust
created by this product may contain
allergens, bacteria and viruses, PM 10
and / or PM 2.5 particulates, exposure
to such hazardous airborne matter can
be reduced by wearing approved safety
equipment such as dust masks that are
specifically designed to filter out the
microscopic particles.
WARNING: Breathing asbestos or
dust with silica in its composition may
contain hazardous crystalline silica.
Silica is a fundamental component of
sand, quartz, brick, clays, granite and
many other materials and rocks,
including masonry, concrete and
cement products. Such crystalline silica
dust is dangerous and must be avoided,
as it can cause severe or fatal
respiratory illness or cancer.
These safety instructions cover the
basic safety rules relating to the
Drive Unit.
Refer to the Instruction Manual
packed with each attachment or
accessory for detailed safety
information and assembly and
operation of the Drive Unit,
attachments and accessories.

9
WARNING: Only use a CRC8000
rapid charger to charge the CFC6500
Power Cell. Using any other charger
to charge the CFC6500 Power Cell
may damage the Power Cell and / or
the charger and cause fires,
explosion, hazardous fumes and
possibly burns or other serious injury.
WARNING: Fire Hazard.
Never expose the Power Cell to
microwaves or high pressures. It may
explode causing serious injury.
Do not store or carry the Power Cell in a
manner in which metal objects could
contact the exposed metal terminals.
Do not place the Power Cell in aprons,
pockets, drawers, tool boxes, etc. with
metal objects, such as, but not limited
to, loose nails, screws, bolts, keys,
coins, staples, foil, etc. Such metal
objects could cause the Power Cell to
short circuit causing fire, explosion, and
hazardous fumes, resulting in personal
injury or property damage.
Never attempt to open, modify,
dismantle, reverse polarity, crush,
puncture or shred the Power Cell for
any reason.
If the housing of the Power Cell breaks,
cracks, swells, or is punctured
immediately discontinue its use and do
not recharge.
Do not charge or use the Power Cell if it
has been dropped or has received a
sharp blow, a heavy weight has been
imposed upon it, has been overheated,
or is cracked, crushed, deformed or
punctured. If a Power Cell has sustained
damage, (as per above, or otherwise)
immediately isolate it in a non-
combustible, safe outside area, remain a
safe distance away but do not leave it
unattended. Such a damaged Power
Cell should be considered and treated
as a potentially thermally unstable,
flammable and hazardous material. If the
Power Cell ignites use water spray,
carbon dioxide, dry chemical or foam
extinguishers to suppress. Avoid
exposure to and inhalation of hazardous
fumes. Contact hazardous materials
authorities for guidance as to
appropriate handling and prompt safe
disposal of damaged Power Cells. Make
arrangements for prompt safe disposal
of a damaged Power Cell per local
hazardous material regulations.
Do not use or charge the Power Cell if it
is wet or shows any evidence of
corrosion.
WARNING: Leakage from the
Power Cell may occur under extreme
usage, charging or temperature
conditions, or if the Power Cell is
damaged, crushed or punctured. This
leakage indicates a failure of the Power
Cell and the Power Cell should be
properly disposed of per local
hazardous material regulations.
POWER CELL & CHARGER SAFETY
INSTRUCTIONS
NOTE:
Detailed instructions are packed with
the Power Cell and Charger.

10
If this leakage gets on your skin, or eyes
follow these steps:
1. Wash skin immediately and
thoroughly with soap and water.
2. If liquid gets into your eyes, flush
immediately with clean water for a
minimum of 20 minutes and seek
immediate medical attention.
If the liquid gets onto your clothing or
shoes, remove, isolate and wash the
contaminated clothing thoroughly.
Do not wash, splash or immerse a
Power Cell in water or other liquids.
Keep the Power Cell out of the reach of
children and away from persons not
fully familiar with these instructions.
Do not expose the Power Cell to heat or
fire. Do not incinerate the Power Cell. It
can explode and emit hazardous fumes.
Do not store or use the Power Cell in
locations where the temperature may
reach or exceed 105°F (40°C) such as in
outside sheds or metal buildings, tool
boxes, vehicle interiors or trunks during
summer. Avoid storing the Power Cell in
direct sunlight.
For air, vessel and ground transport
purposes, Lithium ion Power Cells are
classified as Class 9 Hazardous Goods,
subject to ICAO Technical Instructions
and IATA Dangerous Goods Regulations
and US Department of Transportation
and Transport Canada Hazardous
Material Regulations [HMR] [and other
applicable national regulations]. Such
Power Cells are restricted from being
placed in checked in baggage and are
subject to shipper declarations,
standards, quantity and packaging
regulations. Confirm with the ground,
vessel, air cargo or passenger air travel
service provider as to the most current
regulations to determine if your lithium
ion Power Cells are prohibited, or
subject to restrictions or exemptions
prior to shipping or travel with your
lithium Power Cells.
Do not remove the Power Cell from its
original packaging until it is required for
use.
Always keep the Power Cell clean and
dry. Wipe the terminals with a clean dry
cloth if they become dirty.
Storage Recommendations:
The best storage place for Power Cells
is a secure and safe place that is cool
and dry and away from direct sunlight
and excess heat or cold. Exposure to
excess or prolonged heat will degrade
the performance and the life expectancy
of the Power Cell.
Do not use an extension cord. Plug the
charger cord directly into an electrical
outlet.
POWER CELL & CHARGER SAFETY
INSTRUCTIONS

11
Use the charger only in a standard 120
V AC, 60 Hz electrical outlet.
WARNING: Do not use
the charger in wet or damp
conditions. The charger is intended for
indoor use only. Do not use outdoors.
Do not expose to dew, rain or garden
sprinklers, frost, or snow. Do not use
the charger near sinks or tubs. Do not
immerse the charger in water. Water
entering the chargers or Power Cells will
increase the risk of electric shock.
Do not operate the charger in
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust. Chargers can create
sparks which may ignite the liquids,
fumes or dust.
Do not use the CRC8000 rapid charger
to charge any batteries other than a
CFC6500 Power Cell. Charging other
batteries may cause the batteries to
burst, catch fire, emit hazardous fumes
or explode.
Do not allow the charger cord to hang
over the edge of a table or counter, to
be placed in an area where it can
become entangled with moving objects,
or be a tripping hazard, or to contact
sharp or hot surfaces. The charger
should be placed away from sinks and
hot surfaces.
Do not leave a Power Cell on a
prolonged charge. Remove the Power
Cell after attaining a complete recharge
and unplug the charger when not in
further use.
Do not operate the charger if the cord or
plug is damaged. Have a qualified
technician replace the damaged cord
and plug immediately.
Do not operate the charger if it has
received a sharp blow, been dropped,
crushed, cracked, punctured, immersed
or splashed with water or other liquids,
or otherwise damaged in any way. Have
a qualified technician examine the
charger and repair it if necessary. Do
not disassemble or modify the charger.
WARNING: When the charger is
plugged into the power supply, it can
become shorted by foreign conductive
material and cause sparks or fires.
Foreign conductive material such as, but
not limited to, metal shavings / chips,
steel wool, aluminum foil, nails, staples,
paper clips, should be kept away from
charger ventilation openings, Power Cell
retaining cavity and output terminals.
Do NOT charge the Power Cell when
the work area or the Power Cell
temperature is at or below 0° C (32° F)
or above 45° C (113° F).
Unplug the charger when it is not in use
and before cleaning or maintenance.
POWER CELL RECYCLING
To preserve our natural resources, and
reduce landfill please recycle your
Power Cells at participating retailers, or
dispose of Power Cells properly in
accordance with Federal, State,
Provincial or local laws.
Refer to the Maintenance section for
additional Power Cell recycling
information.
POWER CELL & CHARGER SAFETY
INSTRUCTIONS

12
SYMBOLS
WARNING: Some of the following symbols may appear on the Power Lok™
Drive Unit, Power Lok™ Attachment, Power Cell, Power Cell chargers, or in this
manual. There may also be additional safety symbols and warning decals on
the individual attachments. Study these symbols and learn their meaning.
Proper interpretation of these symbols will allow for more efficient and safer
operation of this tool.
VVolts
AAmperes
Hz Hertz
WWatts
HHours
Direct current
No load speed
Alternating or direct
current
.../min Revolutions or
reciprocations per
minute
Arrow direction
Warning symbol
Shock hazard
Striking hazard
Read the manual
Wear safety glasses.
Wear safety goggles.
Wear hearing protection
Wear safety gloves
Wear safety boots
No fixed blades. No saw
blades.
Handle position
Do not use in the rain
Blower hazard
Hand hazard

13
KNOW YOUR UNIT
Lock-Off Button
Power Control
Button
Coupler
Power Cell
Rear Handle
Locking Lever
Throttle Control
ACCESSORIES
AVAILABLE ACCESSORIES
WARNING: Use only accessories
that are recommended for this Power
Lok™ Drive Unit. Follow the
instructions that accompany the
accessories. The use of improper
accessories may result in injury to
the operator or damage to the Power
Lok™ Drive Unit.
Before using any accessory, carefully
read the instructions or the owner’s
manual for the accessory.
• See chart below
WARNING: If any part is missing or
damaged, do not install an attachment
or accessory, plug the charger into the
power source or install the Power Cell in
the drive unit until the missing or
damaged part is replaced.
Part # Description
CFC6500 Power Cell
CRC8000 1-Hour rapid charger
CCT410 Power Lok™ trimmer attachment
CCH410 Power Lok™ hedge trimmer attachment
CCB410 Power Lok™ blower attachment

14
ASSEMBLY AND OPERATING
INSTALLING THE DRIVE UNIT ON AN
ATTACHMENT
WARNING: Remove the Power
Cell from the drive unit before installing
it on the attachment.
1. Pull the locking lever (1) outward
from the locking collar (2). Align the
groove (3) in the locking collar with
the matching key (4) on the end of
the attachment shaft (5) (Fig. 1).
2. Insert the attachment shaft into the
locking collar until the installation
mark (6) meets the locking collar.
NOTE: Make sure the attachment shaft
is fully inserted into the locking collar. If
it is not fully inserted, the electrical
connection will not be made and the
attachment will not function properly.
3. When the attachment shaft is fully
inserted into the locking collar, push
the locking lever back toward the
locking collar to lock the assembly
together (Fig 2).
NOTE: Make sure the locking lever is
fully pressed toward the locking collar.
This is important to ensure the
assembly is properly locked together.
Instructions for charging the Power Cell are packed with the charger.
WARNING: Read all safety warnings and charging instructions included with
the charger.
Fig. 1
Fig. 2
1
5
6
3
4
2

15
ASSEMBLY AND OPERATING
INSTALLING THE POWER CELL
Once the Power Cell has been fully
charged and you are ready to start
using the attachment, you will have to
install the Power Cell (1) into the drive
unit with Power Cell "TOP" label (2)
facing upward (Fig. 3).
1. Slide the Power Cell into the
matching cavity (3) in the rear of the
upper cowling (4).
NOTE: Make sure you push the Power
Cell fully into the cavity. The locking
latch (5) will click when the Power Cell is
properly installed.
2. Pull outward on the Power Cell to
verify that it is being held in place by
the locking latch.
To remove the Power Cell for recharging
or storage, press the locking latch
toward the Power Cell. While holding
the locking latch toward the Power Cell,
pull the Power Cell out of the tool.
Fig. 3
1
5
3
4
2
These instructions cover the basic functions relating to installing the Drive Unit on
an attachment and how to insert & remove a Power Cell.
Refer to the Instruction Manual packed with each attachment or accessory for
detailed safety information, assembly and operation of the Drive Unit,
attachments and accessories.

16
MAINTENANCE
GENERAL
WARNING: When servicing, use
only original equipment replacement
parts. The use of any other parts may
create a hazard or cause product
damage.
WARNING: DO NOT use
solvents for cleaning your tool,
charger or Power Cell. Solvents could
catch fire or even explode due to
exposure to electric sparks and / or
degrade and make unsafe the
electrical components. Additionally,
plastics are susceptible to damage from
various types of commercial solvents
and may be damaged by their use. Use
a clean cloth to remove dirt, dust, oil,
grease etc.
WARNING: Do not allow brake
fluids, gasoline, petroleum-based
products, penetrating oils, etc. to
come into contact with plastic parts.
They contain chemicals that can
damage, weaken or destroy plastic.
DO NOT abuse power tools. Abusive
practices can damage the tool.
WARNING: DO NOT attempt to
modify tools or create accessories.
Any such alteration or modification is
misuse and could result in a
hazardous condition leading to
possible serious injury. It will also
void the warranty.
POWER CELL REMOVAL AND
PREPARATION FOR RECYCLING
To preserve our natural resources,
please recycle or dispose of Power
Cells properly.
Consult your local waste authority for
information regarding available recycling
and disposal options.
WARNING: Upon removal of the
Power Cell for recycling, cover the
terminals of the Power Cell with
electrical tape or heavy-duty adhesive
tape. Never touch both terminals with
metal objects or body parts, because a
short circuit may result. Keep away from
children. Do not attempt to destroy or
disassemble the Power Cell or remove
any of its components. Rechargeable
Power Cells must be recycled or
disposed of properly. Failure to comply
with these warnings could result in fire
and serious injury.
LITHIUM-ION POWER CELL
MAINTENANCE
Lithium-ion Power Cells share many
characteristics with Nickel-Cadmium
batteries. The major characteristic that
is NOT shared with Nickel-Cadmium
batteries is that Lithium-ion Power Cells
do not have a "memory" and do not
require to be completely discharged
periodically. It is recommended that you
charge your Lithium-ion Power Cell after
each use so they will be fully charged
when needed.
NOTE: A fully charged Power Cell will
lose about 2% of its charge per month
during storage.

17
MAINTENANCE
About Call2Recycle Battery Seals
Call2Recycle’s industry steward
program helps battery and product
manufacturers fulfill recycling
requirements in the U.S. and Canada,
including compliance with extensive
state, provincial and federal regulations,
such as the Mercury-Containing and
Rechargeable Battery Act (The Battery
Act). Call2Recycle®Licensees/Industry
Stewards, participating battery and
product manufacturers and marketers,
purchase the rights to imprint the
Call2Recycle Battery Seals on their
rechargeable batteries and products.
When you see the Call2Recycle Battery
Seal, you can feel confident knowing
that your battery or product can be
safely and responsibly recycled.
About Call2Recycle
Since 1994, Call2Recycle has diverted
more than 75 million pounds of
rechargeable batteries from local
landfills and established a network of
30,000 recycling drop-off locations. More
than 200 battery and/or product
manufacturers, Call2Recycle Industry
Stewards, have united to ensure that
batteries are responsibly recycled when
they reach their end of life and fund the
program that is operated by
Call2Recycle, Inc., a 501(c)4 nonprofit
public service organization.
To locate the nearest recycling center,
please call 1-800-822-8837.

18
NOTES

19
NOTES

20
NOTES