CucinaPro 340 User manual

1

2

3
340
APPLE PEELER

4
CARE INSTRUCTIONS
CAUTION! BE CAREFUL WHEN HANDLING MACHINE
BLADES ARE EXPOSED
• Secure machine onto a clean, dry, smooth surface such as a counter or
table top by turning the suction release lever on the suction base.
• Attach crank handle.
• Release the groove clamp by pushing down on the retaining latch and pull
the crank handle all the way back.
• Spin off the handle.
• Turn the handle around.
• Attach and tighten the handle.
• Check the alignment of the (A) 3-Prong Gripper Fork and the position of the
Corer/Slicer Blade using diagrams A & B.
HOW TO USE
PEEL, CORE, AND SLICE
• Release the groove clamp by pushing down on the retaining latch and pull
the crank handle all the way back.
• Push apple securely onto the 3-Prong Gripper Fork (either end of the apple
will work).
• Simply turn the crank handle until the apple comes in contact with the
blade. If necessary, to adjust the depth at which the blade peels the apple,
loosen the wing nut on the peeler blade and adjust the gap between the
blade and the casting.
• Remove the apple core by releasing the groove clamp and firmly pulling
back on the crank handle. The apple core will pop off the gripper fork.
CORE AND SLICE ONLY
• Carefully pull back on peeler arm and flip retaining latch to hold back the
peeler arm. Leave corer/slicer blade in position.
PEEL ONLY
• Remove (B) corer/slicer blade and use as directed.

5
CLEANING AND CARE
Immediately after use, rinse the machine with warm water and dry with a
towel. This machine is not dishwasher safe. Hand wash only.
I
-
CORRECT
CENTERING BLADE
3 Pronger fork centered
Corer/Slicer Blade
Support Base
Wing Nut
INCORRECT
3 Pronger fork
not centered
Corer/Slicer Blade
Corer/
Slicer
Blade
Corer/
Slicer
Blade
Coring Ring
Coring
Ring
CORRECT
B
A
Wing Nut
Blade
Red casting
Gap determines
thickness of peel
C
INCORRECT
Corer/Slicer Blade
CHANGING THE BLADES
CORER/SLICER BLADE
• When attaching this blade to the frame, make sure the (A) 3-Prong Gripper
Fork is all the way forward by releasing the groove clamp.
• Fit and center (B) corer/slicer blade over (A) 3-prong gripper fork and
support plate with the wing nut and hole (see diagram A). It is very
important to attach the blade with the coring ring facing out, not facing
towards the prongs (see diagram B).
PEELER BLADE
• Loosen wing nut to replace or adjust the blade. Blade can be adjusted
depending on peel thickness (see diagram C).
TROUBLESHOOTING
PROBLEM SOLUTION
Won’t peel
Still won’t peel
Fruit breaks up
before completion
Fruit is not slicing
3-Prong Gripper Fork must be centered
through corer/slicer blade as in diagram A
and peeling blade is set as in diagram C.
Adjust blade (see diagram C) by increasing
gap no further than 1/16” at a time. If the
gap it too big, it will gouge the apple.
Fruit is too soft. Use only fresh, firm fruit.
Corer/Slicer blade is on backwards
(see diagram B).

6

7
ONE YEAR LIMITED WARRANTY
CucinaPro warrants to the original purchaser that this product will be free
from defects in material and workmanship under normal home use for one
year from the date of purchase with valid proof of purchase. During this
period, CucinaPro will either repair or replace, at its discretion, any defective
product at no charge to the owner. Replacement products or repaired parts
will be guaranteed for only the unexpired portion of the original warranty or
six months, whichever is greater.
This limited warranty does not apply to any defects resulting from accident,
misuse, improper maintenance, or normal wear and tear. The manufacturing
company is not liable for any incidental or consequential damages incurred
by such circumstances. If for any reason you’re not completely satisfied with
your purchase, you may return your selection with original proof of purchase
for an immediate exchange or refund (less shipping and processing) within 30
days of receipt with valid proof of purchase.
This warranty only applies to CucinaPro products operated in the United
States. CucinaPro products operated outside the United States, the original
purchaser will be responsible for shipping costs. If you believe your product is
defective, please contact CucinaPro Customer Service.
www.cucinapro.com
[e-mail]

8