Culligan HD-202 User manual

Culligan®
Heavy Duty
Commercial
Filters
Culligan’s Hi-Flo®55e Commercial Filters
apartments
assisted living facilities
cafeterias
casinos
corporate campuses
educational facilities
food service
government
grocery
health clubs
hotel/hospitality
institutions
laundry
manufacturing facilities
theme parks
travel centers
vehicle wash Standard Features
•24Volt Culligan’s MVP™Controller –Field
programmable with a back-lit LCD display and
UL listed 120v/24v transformer.
•Single, Duplex, Triplex, or Quad Configurations
•Regeneration initiation by choice of time clock,
meter or differential pressure switch.
•Carbon Filters –For reduction of organics (flow
rates up to 39gpm), or chlorine (flow rates up to
77gpm).
•Depth Filters –Flow rates up to 193gpm.
•Top-Mounted Control Valve –Keeps plumbing
connections simple and adaptable. Full flow
porting with rounded orifices and wide-open
cartridges promote good flow characteristics and
low pressure fluctuations.
•Corrosion resistant tanks –Made of low carbon
steel with epoxy interior lining and finish coat
painted exterior.
Trust The Water Experts®

Culligan’s Hi-Flo®55e Commercial Filters
www.culligan.com™
1-800-CULLIGAN
©2003 Culligan International Co.
Printed in USA (12/03)
MOORE PART NO.47601
“Hey Culligan Man!”
®
Products manufactured and marketed by Culligan International Company (Culligan) and its affiliates are protected by patents issued or pending in the United States and other
countries. Culligan reserves the right to change the specifications referred to in this literature at any time, without prior notice. , Brunermatic, Hey Culligan Man,
Culligan Man, Culligan Commercial @ Work, www.culligan.com and Culligan Service Network are trademarks of Culligan International Company or its affiliates.
ISO 9001
Certification
HD-202 22 2 33 3 44 5 30 2
HD-242 32 2 48 5 63 7 45 2
HD-302 50 4 74 7 99 12 70 2
HD-362 71 5 107 11 142 19 100 2
HD-423 97 3 145 6 193 9 135 3
HR-202 1910114 1 1822220 2
HR-242 1311119 1 2622230 2
HR-302 2012130 1 4023245 2
HR-362 2912142 4 5726270 2
HR-422 3913158 5 77282100 2
Model Flow Rate
(GPM) Pressure
Loss (PSI) Flow Rate
(GPM) Pressure
Loss (PSI) Flow Rate
(GPM) Pressure
Loss (PSI)
Backwash
Flow Rate
(GPM)
Valve
Size
(inches)
Superior*
* Superior –Best quality water with lowest pressure loss. Recommended for influent suspended solid loads up to and greater than 300 ppm.
** High –Very good quality water with increased pressure loss. Recommended for influent suspended solid loads less than 300 ppm.
*** Utility –Satisfactory quality water with greatest pressure loss. Shorter on line time between backwashing. Recommended for influent suspended solid
loads less than 150 ppm.
1For Sediment and organic removal use the flow rates from the superior water quality column.
2 For chlorine removal only,use the flow rates from the utility water quality column.
All pressure drop figures are based on new filter media and a water temperature of 60°F.
Depth filters are capable of 10 micron effluent water quality, whereas all other filter types are capable of 40 micron effluent water quality.
Water Quality
High** Utility***
Depth Filters
Carbon Filters
System Specifications
Pressure: 30–100 psig
207–690 kPa
Power: 120 VAC/24 VAC
50/60 Hz
Temperature: 40–120°F
4–49°C
Applications and Benefits
•Food and Beverage–Superior taste and increased
cost savings.
•Drinking Water–Reduces turbidity and chlorine;
improves taste and clarity.
•Boilers—Turbidity reduction, minimize sludge
blowdown.
•Light Industry Processes—Reduces particulate matter.
•Pretreatment—For softeners, RO’s and DI systems.
•Vehicle Wash—Turbidity reduction.
Options
•Patented Progressive Flow-
Culligan’s MVP™controller can
monitor flow demands,bringing
additional tanks on-line or off-line
as flows increase or decrease.
•Differential Pressure Switch
•A.S.M.E. Code Tanks
•Sample cocks and pressure gauges
•Separate source regeneration kits
•Skid mounting
•Flow meter
Warranty
Culligan’sHi-Flo 55e water filters are
backed by a limited 1-year warranty
against defects in material,
workmanship and corrosion.In
addition, tanks carry a limited 5-year
warranty.*
* See printed warranty for details.
Culligan will provide a copy of the
warranty upon request.

HI-FLO®
DEPTH FILTERS
FOR SEDIMENT REDUCTION
SPECIFICATIONS AND OPERATING DATA
Hi-Flo 55 Hi-Flo 50
MODELNUMBER HD-202 HD-242 HD-302 HD-362 HD-423 HD-483 HD-544 HD-604 HD-726HD-846
Peak
ServiceFlow@ gpm 30 45 75 100 150 190 240 300 440 600
Pressure Drop @ psi @ 3 @ 4 @ 7 @ 10 @ 6 @ 10 @ 8 @ 10 @ 10 @ 10
L/min 114 170 284 379 568 719 908 1,140 1,670 2,270
@ kPa @21 @28 @ 42 @69 @ 41 @69 @ 55 @69 @69 @ 69
Normal
ServiceFlow@ gpm 15 20 35 50 70 90 110 140 200 270
PressureDrop @ psi @ 1 @ 1 @ 2 @ 3 @ 2 @ 3 @ 3 @ 2 @ 2 @ 2
L/min 57 76 132 189 265 340 420 530 750 1,020
@ kPa @ 6.9 @ 6.9 @14 @ 21 @14 @ 20 @20 @ 14 @14 @14
BackwashFlow gpm 30 45 70 100 135 188 210 270 400 540
L/min 114 170 265 379 511 712 795 1,020 1,510 2,040
Tank Size
Diameter in 20 24 30 36 42 48 54 60 72 84
mm 510 610 760 910 1,070 1,220 1,370 1,520 1,830 2,130
Sideshell in 48 48 48 54 54 60 60 60 60 60
mm 1,220 1,220 1,220 1,370 1,370 1,520 1,520 1,520 1,520 1,520
Pipe Size
Inlet/Outlet in 2 2223344 66
MediaVolume ft35 8 12 17 23 32 40 49 70 97
m30.142 0.227 0.340 0.481 0.651 0.906 1.13 1.39 1.98 2.75
Ship Weight,Approx. lb 870 1,150 1,750 2,530 3,550 7,000 8,800 10,800 18,500 25,000
kg 390 520 790 1,150 1,610 3,175 4,000 4,900 8,390 11,340
NOTES:
1 Service flow rates are based on 7 gpm/ft2(26 L/m2/min) for Normal and 15 gpm/ft2(57 L/m2/min) for Peak Flow rates. Actual service rate can vary from
2 to 20 gpm/ft2(8 - 76 L/m2/min) depending upon the application and the raw water.
2 Backwash flow rates are based on 12-14 gpm/ft2(45-53 L/m2/min) using 50° F (10° C) water. A different backwash rate may be required depending upon
water temperature or the type of carbon used.
3 Operational, maintenance and replacement requirements are essential for this product to perform as advertised. Service is available through independently
operatedCulligan dealerships.
Commercial Systems
©2000 Culligan
1-800-CULLIGAN
www.culligan.com
Printed in USA Rev. 4/00
DCO 992587
SL-0070
Moore Part No. 46924

HI-FLO®
CULLAR®AUTOMATIC FILTERS FOR
DECHLORINATION AND ORGANIC ADSORPTION
SPECIFICATIONS AND OPERATING DATA
Hi-Flo 55 Hi-Flo 50
MODELNUMBER HR-202 HR-242 HR-302 HR-362 HR-423 HR-4825 HR-543 HR-603 HR-724 HR-844
Dechlorination
ServiceFlow@ gpm 20 30 50 70 100 125 160 200 280 380
Pressure Drop @ psi @ 2 @ 2 @ 4 @ 8 @ 13 @ 16 @ 18 @ 13 @ 12 @ 16
L/min 76 114 189 265 379 473 606 757 1,060 1,440
@ kPa @14 @14 @ 28 @55 @ 90 @110 @124 @90 @ 83 @110
OrganicsAdsorption
ServiceFlow@ gpm 10 15 25 35 50 65 80 100 140 200
PressureDrop @ psi @ 1 @ 1 @ 2 @ 3 @ 4 @ 4 @ 6 @ 4 @ 5 @ 6
L/min 38 57 95 132 189 246 303 379 530 757
@ kPa @ 6.9 @ 6.9 @14 @ 21 @28 @ 28 @41 @ 28 @34 @ 41
BackwashFlow gpm 20 30 45 70 100 136 160 210 270 400
L/min 76 114 170 265 379 515 606 795 1,020 1,510
Tank Size
Diameter in 20 24 30 36 42 48 54 60 72 84
mm 510 610 760 910 1,070 1,220 1,370 1,520 1,830 2,130
Sideshell in 48 48 48 54 54 60 60 60 60 60
mm 1,220 1,220 1,220 1,370 1,370 1,520 1,520 1,520 1,520 1,520
Pipe Size
Inlet/Outlet in 2 22222.53344
MediaVolume ft36 8 12 18 24 32 40 48 70 96
m30.170 0.227 0.340 0.510 0.680 0.910 1.13 1.36 1.98 2.72
Ship Weight,Approx. lb 530 670 1,000 1,420 2,000 5,200 6,500 8,000 12,500 17,000
kg 240 300 450 640 910 2,400 2,900 3,600 5,700 7,700
NOTES:
1 Service flow rates are based on 5 gpm/ft2(19 L/m2/min) for Organic Adsorption and 10 gpm/ft2(38 L/m2/min) for Dechlorination. Actual flow rate may vary
depending upon the application and the raw water.
2 Backwash flow rates are based on 10 gpm/ft2(38 L/m2/min) using 50° F (10° C) water. A different backwash rate may be required depending upon
water temperature or the type of carbon used.
3 Operational, maintenance and replacement requirements are essential for this product to perform as advertised. Service is available through independently
operatedCulligan dealerships.
Commercial Systems
©2000 Culligan
1-800-CULLIGAN
www.culligan.com
Printed in USA Rev. 4/00
DCO 992587
SL-0071
Moore Part No. 46925

HI-FLO®
CULLSORB®AUTOMATIC FILTERS FOR
IRON AND MANGANESE REDUCTION
SPECIFICATIONS AND OPERATING DATA
Hi-Flo 55 Hi-Flo 50
MODELNUMBER HG-202 HG-242 HG-302 HG-362 HG-423 HG-4825 HG-5425 HG-6025 HG-723 HG-844
ServiceFlow@ gpm 10 15 25 35 50 65 80 100 140 190
PressureDrop @ psi @ 3 @ 3 @ 4 @ 4 @ 4 @ 4 @ 6 @ 4 @ 5 @ 6
L/min 38 57 97 132 190 250 300 380 530 720
@ kPa @21 @21 @ 28 @28 @ 20 @28 @ 41 @28 @ 34 @41
BackwashFlow gpm 30 45 70 100 135 160 210 240 350 480
L/min 110 170 270 380 510 610 800 910 1,330 1,820
Tank Size
Diameter in 20 24 30 36 42 48 54 60 72 84
mm 510 610 760 910 1,070 1,220 1,370 1,520 1,830 2,130
Sideshell in 48 48 48 54 54 60 60 60 60 60
mm 1,220 1,220 1,220 1,370 1,370 1,520 1,520 1,520 1,520 1,520
Pipe Size
Inlet/Outlet in 2 22232.52.52.534
MediaVolume ft35 8 12 19 25 34 43 53 76 104
m30.156 0.212 0.340 0.538 0.708 0.962 1.22 1.50 2.15 2.94
Ship Weight,Approx. lb 850 1,150 1,790 2,680 3,720 7,200 9,100 11,600 17,500 27,000
kg 385 522 812 1,220 1,690 3,300 4,100 5,300 7,900 12,000
NOTES:
1 Service flow rates are based on 5 gpm/ft2(19 L/m2/min). Actual flow rate may vary depending upon the application and the raw water.
2 Backwash flow rates are based on 12-14 gpm/ft2(45-53 L/m2/min) using 50° F (10° C) water. A different backwash rate may be required depending upon
water temperature or other water conditions.
3 Operational, maintenance and replacement requirements are essential for this product to perform as advertised. Service is available through independently
operatedCulligan dealerships.
Commercial Systems
©2000 Culligan
1-800-CULLIGAN
www.culligan.com
Printed in USA Rev. 4/00
DCO 992587
SL-0071
Moore Part No. 46925