Current E-WAND Guide
1
Installation Manual and
User Guide
2
Installation Manual & User Guide
Please carefully and fully read the following Installation
Manual and User Guide. Without proper installation and
programming, your E-Wand will not perform as designed.
Please save these instructions.
Please be aware that the E-Wand may behave dierently
based on blind manufacturer, slat size, and tilt mechanism
location.
For assistance:
CALL: 844-307-7435
EMAIL: [email protected]
WEBSITE: www.myewand.com/support
Instructional Videos can be viewed by going to
www.myewand.com/support
or by scanning the QR Code with your smart
phone.
To register your E-Wands, visit
www.currentproductscorp.com/products-registration.
3
TABLE OF CONTENTS
Mounting & Programming the E-Wand
Horizontal Blinds Installation & Programming Guide
Vertical Blinds Installation & Programming Guide
Batteries
5
6
7
7
8
9-10
11-14
15-18
19-21
22-25
27-29
30-31
32
33
34
35
35-36
37
37
38
38
39
40
4
Extension Handle
41
42-43
44
45-46
47
47
47
48
48
49
49
50-52
53-54
5
PACKAGE CONTENTS
AND PARTS IDENTIFIER
HORIZONTAL BLIND
MOUNT
VERTICAL BLIND
MOUNT
(6) AA 1.5V ALKALINE
BATTERIES
VERTICAL BLIND
REINFORCEMENT TAPE
EXTRA ADHESIVE STRIPS
OPTIONAL REMOTE
with wall plate
INSTALLATION MANUAL AND
USER GUIDE
Optional HORIZONTAL
TILT Converter
Optional EXTENSION
HANDLE
Wand Hook
SleevE
Installation Manual
&
User Guide
6
MEET YOUR E-Wand
Attachment Hook
Programming Button
Retaining Sleeve
Light Sensor Switch
Temperature Sensor switch
Control Housing
Twist Handle
Battery Cap
The E-Wand allows the user to motorize the slat movement for both horizontal
and vertical window blinds. Users can fully control the position of an individual
blind’s slats or a dened group of blind’s slats with manually with a slight twist of
the handle, with the remote, through the MyCurtains app, and using voice control.
Your E-Wand contains both light and temperature sensors for localized
automation of the opening and closing of the slats. This automatic movement
helps provide privacy at night and can be set to open and close the slats to assist
with maintaining a comfortable room temperature and help save energy.
For power, the E-Wand requires six (6) 1.5v Alkaline AA sized batteries (provided)
which are easy to replace and will provide, in most cases, approximately a year
between battery changes.
7
HORIZONTAL BLINDS DIAGRAM
HEADER
MANUAL TWIST
WAND
OR CORDED TILT
LIFTING CORD
SLATS
NOTE: Some blinds use a corded tilt mechanism to tilt the slats instead of a wand.
If your horizontal blinds have a corded tilt mechanism, you will need to convert it
to a wand tilt mechanism using the horizontal tilt gear. Instructions for converting
to a wand tilt mechanism can be found on page 9.
TILT GEAR
STEM VALANCE
Vertical BLINDS DIAGRAM
SLATS
HEADER
MANUAL TWIST WAND
NOTE: The E-Wand is not compatible with vertical blinds that use a rope or chain
to open and close the slats.
TILT GEAR
STEM
SLAT
ATTACHMENT
8
MOUNTING & programming
THE E-Wand
1. POWER UP
1.1 Unscrew Battery Cap
1.2 Insert Batteries
When batteries are properly installed, the E-Wand will play a
9
HORIZONTAL BLINDS
INstallation & Programming
2. Converting a horizontal cord tilt blind
Figure 2.1; Standard Assembly
Figure 2.2; Remove Tassels
Figure 2.3; Standard Assembly
10
Figure 2.4; Snap in Adapter
Figure 2.5; Slide Stem through Header
11
blinds in both directions
3. Installing the e-wand on Horizontal
Blinds
E-WAND
12
Figure 3.1; Slide Hook Sleeve onto Stem
-
connecting or inserting the slat
Figure 3.2; Hook
Wand onto Tilt Stem
Figure 3.3; Push up
Retaining Sleeve
13
can be seen through the cutout in the
Figure 3.4; Snap on
Blind Mount
Figure 3.5; Proper
Positioning
AND that the blind slats resting in the
Figure 3.6; Tilt Stem
Protrudes from
Headrail Preventing
a Flush Mount
Figure 3.7; Blind
Slats Touch
E-Wand
Figure 3.8; Proper
positioning without
valance
Figure 3.9; Proper
positioning with
valance
14
Figure 3.11; (Optional) Trim Blind Mount
to Fit
Figure 3.12; Remove Backing from
Adhesive Strip to Attach it to Header
Figure 3.10; (Optional) Build out Header
15
4. programming e-wand
horizontal slat positions
E-Wand.
Figure 4.1; Press and Hold Programming
Button
16
Figure 4.2; Twist
Blinds to Full
Closed
Figure 4.3;
Push and Hold
Programming
Button
17
Figure 4.6; Twist
Blinds to Full
Closed
Figure 4.7;
Push and Hold
Programming
Button
Figure 4.4; Twist
Blinds to Full
Open
Figure 4.5;
Push and Hold
Programming
Button
18
Figure 4.8; Twist
Blinds to Full
Open
Figure 4.9;
Push and Hold
Programming
Button
19
5. Installing the E-Wand on Vertical Blinds
Vertical BLINDS
INstallation & Programming
E-WAND
20
Figure 5.2; Reinforce vertical slat with
slat reinforcement tape
Figure 5.3; Install Blind Mount
Figure 5.1; Remove rst vertical slat
Other manuals for E-WAND
4
Table of contents
Other Current Window Blind manuals
Popular Window Blind manuals by other brands
VENETA
VENETA Smartfit Day & Night Honeycomb quick start guide
Harol
Harol Coolscreen 8 Solar Mounting instruction
WeatherMaster
WeatherMaster Verishade XT product manual
SOMFY
SOMFY Sonesse 40 RTS installation instructions
English Blinds
English Blinds Wooden Blinds installation guide
HunterDouglas
HunterDouglas LiteRise Installation
my home
my home Carpi Assembly instructions
HunterDouglas
HunterDouglas Decor Standard Cordlock Installation and operation
Baha
Baha Cord Operated Roman Blind installation instructions
TOSO
TOSO Mytec 01 Loop Double Type instruction manual
Victoria M
Victoria M KLEMMFIX ROLLO Original assembly instructions
3 Day Blinds
3 Day Blinds 2 Getting started
