Curtis TCN Datasheet

56
ITEM PART Nº DESCRIPTION
find the latest on the web at
www.wilburcurtis.com
WILBUR CURTIS COMPANY, INC.
6913 Acco Street, Montebello, CA 90640-5403
Telephone: [phone]
Fax: [phone]
10/09 . F-3639 . rev C
10/2/9 . 12.5 . ecn 10624
11/7/7 . 16.0 . ecn 9364
10/10/07 . 12.1 . ecn 9301
8/10/04 . 12.3 . edr 4105
ITEM PART Nº DESCRIPTION
3
4
1
2
7
8
9
10
Instructions and Parts List – TCN
Instructions and Parts List – TCN
11
1
1A
2
3
4
5
WC-56036
WC-61436
WC-38471
WC-37260
WC-1803
WC-3707
6
7
8
9
10
11
SEAT CUP, FAUCET S'
HANDLE, GASKET
LABEL, CURTIS SWP CLR/WHT
DRIP TRAY, OCTAGON STYLE
LEG, PLASTIC GLIDE TCN
FAUCET, PINCH TUBE TC
WC-1805
WC-3289
WC-38163
WC-5686
WC-3531
WC-1840
LID, PLASTIC TCN
LID, BLACK PLASTIC (OLD)
LABEL, FRONT TCN GENERIC
KIT, FAUCET W/ADAPTER CMPLT
FAUCET, SPB
KIT, REPAIR SPB FAUCET
OPTIONAL
FAUCET
1A

DAILY CLEANING
Wipe any spills, dust or debris from the exterior surfaces with
a damp cloth.
Wash the tea container.
A. Clean inside the container and top cover with a mild
detergent solution.
B. Remove the faucet assembly by unscrewing the wing nut.
C. Unscrew the bonnet assembly from the faucet. Clean
inside the faucet body. Run a circular brush through the
spout and the back of the faucet.
D. Disassemble the bonnet/handle assembly by unhooking
the handle from the shaft. Thoroughly clean these parts.*
E. Clean the shank assembly (still on the container) by
pushing the through with a circular brush.
F. Dry the parts that were cleaned. When parts are dry,
return them to the tea container.
After cleaning, the outside surfaces of the server should be
wiped down with stainless steel polish to clean, polish and
prevent scratches.
* While the handle parts are disassembled, check the condi-
tion of the seat cup. Replace it if you observe any tears or if
the silicone has hardened.
The pinch tube style faucet will not have a seat cup; all other
parts are similar.
1.
2.
3.
10/09 . F-3639_rev C
HANDLE
BONNET
SPRING
SHAFT
SEAT CUP
Unlock the shaft from the
handle. Compress the spring,
pressing down on the bonnet
then unhooking the handle.
Clean these faucet parts.
Before brewing into the tea container, wash the inside with a mild solution of dish soap and water.
Rinse with clear water. Open the faucet, draining any remaining rinse water.