Cyberlock Touchpad TukTuk User manual

Public Mode
TukTuk
Combination Locks
TOUCHPA D
180 º
180 º
Using Power Bank
When there is no battery power and the lock is in locked position
(door is locked), the user can use a power bank for emergency opening
with Micro USB slot on front of lock.
Battery should then be changed immediately.
Low Battery Warning
3 short beeps will sound upon using the lock when the battery is low.
Battery should be changed when there is low battery warning .
Owner
Admin
User
User Levels
There are 3 user levels
Owner (1) : Complete authority
Admin (up to 3) : User management authority
User (Unlimited user): Basic Lock / Unlock use only
In case of forgotten password
When the lock is in locked position and the "Owner" does not remember
the password, Emergency Key can be used to open it.
In case of entering wrong password
Wait some time to re-enter. This function is to prevent password hacking.
Times Wait Warning
1st & 2nd time - Red LED lflashes 3 times, along
3rd time 15 seconds with 2 short beeps.
4th time 20 seconds
5th time 30 seconds Red LED lflashes quickly for
6th time 10 minute 4 seconds with a 30-second long beep.
7th time 30 minute
OPERATING INSTRUCTIONS
2. Turn the key 180º
to open position,
door can now be
opened, but key
cannot be removed.
1. Insert Emergency Key 3. Turn the key 180°
back to close position
and remove the key.
Close Position
Important Components
Open Position
Front View
Cam
Micro USB Slot
(For Power Bank)
Battery Case
3V DC
For 2 AAA (1.5V) Battery Slot Emergency Key
Tact Switch
Emergency
Key Slot
Back View
Knob
Touchpad
Authority

-
-

-

-
-
-
-
-


-
-
-


-
-
-
-
-




-




-



•
Lock / Unlock
• Owner Registration
• Admin Registration
• User Registration
• Password Change
• Fake Code Use
• Factory Reset
• Delete Admin (one at a time)
• Delete User (one at a time)
• Delete All Users
• Emergency Key Use
• Password Reset (In case of forgotten password)
Owner Admin User
1
Factory Default Password
1111 Owner registration
1234 Factory Reset
Operation Code
1 Registration for Owner / Admin / User
2 Changing password
3 Deleting one user
4 Deleting all, except Owner
14 Factory Reset
User Code
123 Owner
211 Admin 1
212 Admin 2
213 Admin 3
311 User 1
312 User 2
313 User 3
314 User 4
321 User 5
322 User 6
Full Manual
Operation Code
1 Registration for Owner / Admin
2 Changing password
3Deleting one user
4Deleting all, except Owner
14 Factory Reset
Code Operation
User Code
Code User Type
123 Owner
211 Admin 1
212 Admin 2
213 Admin 3
Touchpad Buttons
Button Function
1Inputs number 1
2 Inputs number 2
3 Inputs number 3
4 Inputs number 4
Button Function
O
"Enter" button for password
C
Cancels wrong password
entered
Password
User can set a password that can have from 4-16 digits, i.e.
* * * * (4 digits)
* * * * * * * * * * * * * * * * (16 digits)
To use fake code , the user can enter the real code to Lock / Unlock
* * * * 112423 (real code in front)
12 2 * * * * 312 (real code somewhere in the middle)
121123 * * * * (real code at end)
Code For Operation
1111 Owner registration
1234 Factory Reset
Factory Default Password

Factory Default Password
1111 Owner registration
1234 Factory Reset
Operation Code
1 Registration for Owner / Admin / User
2 Changing password
3 Deleting one user
4 Deleting all, except Owner
14 Factory Reset
User Code
123 Owner
211 Admin 1
212 Admin 2
213 Admin 3
311 User 1
312 User 2
313 User 3
314 User 4
321 User 5
322 User 6
Setting
Public Mode
Factory Default Password
1111 Owner registration
1234 Factory Reset
Operation Code
1 Registration for Owner / Admin / User
2 Changing password
3 Deleting one user
4 Deleting all, except Owner
14 Factory Reset
User Code
123 Owner
211 Admin 1
212 Admin 2
213 Admin 3
311 User 1
312 User 2
313 User 3
314 User 4
321 User 5
322 User 6
Whenever a button is pressed.
Green LED l flashes, along with a short beep.
Initial registration for new lock or lock that has
been reset to factory default settings, the first
registered user will be assigned "Owner" status
automatically.
Deleting Authority
- Owner can delete Admin
2
Owner Registration
1. Enter Operation Code 1 (for register Owner), press OK.
2. Enter Factory Default Password (1111), press OK.
3. "Owner" enters new password 4-16 digits, press OK.
4. Confirm new password, press OK.
Factory Default
Password
Owner enter
new password
4-16 digits
Operation
Code for
register
1O1111 O * * * * O * * * * O
Owner confirm
password
Admin Registration (By Owner only)
1. Enter Operation Code 1 (for register Admin), press OK.
2. Enter User Code 123 (Owner), press OK.
3. "Owner" enters password, press OK.
4. Enter User Code 211 (Admin 1), press OK.
5. Sets password for Admin 1 4-16 digits, press OK.
6. Confirm password, press OK.
User Code
(Owner)
Operation
Code for
register
Password
(Owner)
User Code
password
(Admin 1)
New password
(Admin 1)
4-16 digits
Confirm
new password
(Admin 1)
1O123 O* * * * O 211 O * * * * O * * * * O
Deleting Users (one user at a time) / (Performed by Owner only)
1. Enter Operation Code 3 (for delete User), press OK.
2. Enter User Code, press OK.
3. Enter password, press OK.
4. Enter User Code of the User to delete, press OK.
User Code
(Owner)
User Code
Password
Operation
Code for
delete user
3O* * * O * * * * O * * * O
Deleting Users (all users except Owner) / (Performed by Owner only)
1. Enter Operation Code 4 (for delete all users, except Owner), press OK.
2. Enter User Code, press OK.
3. Enter password, press OK.
4. Enter Operation Code 4 (to delete all users, except Owner), press OK.
User Code
(Owner)
Password Operation Code
to delete all users
Operation
Code for
delete all
users
4O* * * O * * * * O 4O

Factory Default Password
1111 Owner registration
1234 Factory Reset
Operation Code
1 Registration for Owner / Admin / User
2 Changing password
3 Deleting one user
4 Deleting all, except Owner
14 Factory Reset
User Code
123 Owner
211 Admin 1
212 Admin 2
213 Admin 3
311 User 1
312 User 2
313 User 3
314 User 4
321 User 5
322 User 6
Public Mode Whenever a button is pressed.
Green LED l flashes, along with a short beep.
Setting
3
Password Reset (In case of forgotten password) for User
Press Tact Switch
1. Press Tact Switch for 15 times.
2. Wait for 5 seconds, password will be reset then enter new password.
15
times
Password Management
* Default password will not work after
the password has been changed.
For Owner or Admin:
new password must be entered
see how to change the pasword
in the next topic
Lock will reset to default password
setting according to user type
Password Reset (In case of forgotten password) for Owner/Admin
1. Press Tact Switch for 15 times.
2. Enter User Code, press OK.
Press Tact Switch * * * O
15
times
User Code Owner
Admin 1
Admin 2
Admin 3
* Lock will reset to
default password setting
User
code
User
Type
44332211
21212121
22222222
23232323
123
211
212
213
Factory Reset (Performed by Owner only)
1. Enter Operation Code 14 (for factory reset), press OK.
2. Enter User Code 123 (Owner), press OK.
3. Enter password, press OK.
4. Enter Factory Default Password 1234 (Factory Reset), press OK.
User Code
(Owner)
Password
(Owner)
Factory Default
Password
Operation Code
for factory reset
14 O123 O * * * * O 1234 O
Changing Password
1. Enter Operation Code 2 (for changing password), press OK.
2. Enter User Code, press OK.
3. Enter old password or enter default password in case the password has been reset, press OK.
4. Enter new password 4-16 digits, press OK.
5. Confirm new password, press OK.
User
Code
Operation Code
for changing
password
Old Password /
Default Password
Confirm
new password
New password
4-16 digits
2O* * * O * * * * O * * * * O * * * * O

Factory Default Password
1111 Owner registration
1234 Factory Reset
Operation Code
1 Registration for Owner / Admin / User
2 Changing password
3 Deleting one user
4 Deleting all, except Owner
14 Factory Reset
User Code
123 Owner
211 Admin 1
212 Admin 2
213 Admin 3
311 User 1
312 User 2
313 User 3
314 User 4
321 User 5
322 User 6
To Lock
* * * * O
To Unlock
* * * * O
Operation
Public Mode Whenever a button is pressed.
Green LED l flashes, along with a short beep.
1. Enter desired password 4-16 digits , press OK.
2. Turn knob to Close position
1. Enter password , press OK.
2. Turn knob to Open position
PasswordNew password
4-16 digits
Password can be used 2 times maximum, when the maximum is reached, password will be reset automatically.
4
25/10/2019