RELEASE DATE: BY:
REVISION DATE: REV
PRODUCT NAME:
PRODUCT NUMBER:
Bike Check Parking System
This installation instruction will describe the steps to assemble a Bike Check rack.
1 8 Support Bar
210 U-Bolt
310 Inner Leg
410 Outer Leg
5 4 End Cap (1-1/4")
Foot Pads are provided with holes for staking
ALWAYS OBSERVE POSTED SAFETY GUIDELINES WHEN ASSEMBLING THIS PRODUCT
ALWAYS WEAR SAFETY GLASSES
Bike Check
12457
1. First, slide the Inner Leg (12457) onto
the 8-ft long Support Bar (12465) and align
the holes.
2. Slide the Outer Leg (12456) onto the
Inner Leg (12457) and align the holes.
3. Insert the U-Bolt (12464) through the
aligned holes to hold the end of the
assembly together.
4. Tap the End Cap (12466) tightly into the
Outer Leg.
STEP-1
STEP-2
STEP-3
STEP-4
NO TOOLS
NEEDED!
Apply your padlock or heavy "zip" tie
to the hasp for security.
