cycliq Fly 6 User manual

QUICK START GUIDE

What’s in the box
Fly6
Generation 3
64GB micro SD
card (preinstalled) Seat post
mount
Safety
tether
USB-A - USB-C
cable
Aero + D shape
seat post adaptor
0° Spacer
Aero + standard
seat post strap

Fly6 layout
Q button
Power
button

Fly6 layout
microSD card slot
Charge port
Port cover
Tail light
Microphone
Recording
indicator light

Before your first ride
Please follow these simple steps before your first ride
with your Fly6 Generation 3.
1. Ensure you fully charge the Fly6.
2. Ensure the Fly6 port door is securely closed.
3. Ensure the safety tether is correctly attached.
4. Ensure the date and time stamps are correct.

Connecting to the Fly6 for
the first time
All Fly6 settings can be managed using the CycliqPlus mobile app.
Connecting to your mobile device
The Fly6 uses Bluetooth for connection to your smartphone. The
first time you connect you will need to follow the below steps to
enable Bluetooth.
Turn on the Fly6 by pressing and holding the power button.
Open the CycliqPlus mobile app and ensure Bluetooth is enabled on
your phone.
Select your Fly6 from the menu.
The Fly6 indicator light will illuminate blue when connection is
successfully established.
The Fly6 will automatically sync with the time and date settings
from your smartphone when connecting to CycliqPlus.

Mounting the Fly6

1. Insert either the standard or aero strap into the seat post mount
and pull the strap all the way through. Ensure the silicon coated
part of the strap is positioned to grip onto your seat post.
2. Select the appropriate spacer or adapter for your bike and
place it between the seat post mount and your bike’s seat post.
3. While holding the mount against your seat post, wrap the strap
around and feed it through the clasp of the strap. Wrap the strap
back onto itself and connect the Velco to secure the mount.
4. To mount the Fly6, align the tabs on the Fly6 with the slots in
the seat post mount. Turn the Fly6 clockwise a 1/8th turn until you
hear a click confirming the Fly6 is locked into the mount. Note the
seat post mount will appear tight when first attaching the Fly6.
Mounting the Fly6

Light modes
You can cycle through the available light modes using the power
button.
Camera Only (Tail light off)
Constant High (Tail light solid with high intensity)
Constant Low (Tail light solid with low intensity)
Flash High (Tail light flashing with high intensity
Flash Low (Tail light flashing with low intensity)
Organic (Random generation of high and low intensity)
All light modes are available by default on the Fly6. You can
customise the available light modes on CycliqPlus so only your
preferred modes are available.
The light mode last used will be remembered when the Fly6 is
turned off.

Battery level indicator
When turning on your Fly6, an audible battery status will sound
indicating the current battery level.
4 rapid high pitched beeps = 75% to 100% charged
3 rapid high pitched beeps = 50% to <75% charged
2 rapid high pitched beeps = 25% to <50% charged
1 rapid high pitched beeps = 12% to <25% charged
3 long high pitched beeps = less than 12% charged

Looping function
The Fly6 was designed as a set and forget cycling safety device.
The footage is set to record on a continuous loop so you don’t
have to worry about running out of storage space on the microSD
card.
When there is no free space left to record on your microSD card,
the Fly6 will start recording over the oldest video file first. Any
locked footage saved by the Fly6 will not be overwritten by the
looping function.
Oldest file overwritten
Fly6 continues recording microSD card full
Locked files will
not be overwritten

Incident protection mode has been designed to save your footage
from major incidents without being recorded over.
Incident protection mode is activated when the Fly6 is tilted more
than 60° from vertical (or 30° from the ground) for more than five
seconds. If this happens, the Fly6 will lock the current and
immediately preceding video segments and will continue record-
ing as normal.
Incident Protection

Manual footage capture
If you witness an event that you want to capture and retain when
riding, simply hold the Q button for approximately 2 seconds. This
will lock the current and preceding video files.
Three rapid beeps will sound to confirm the video files have been
locked.
Still image capture
The Fly6 can take a still image while recording video. You can do
this by holding the power and Q button simultaneously for
approximately 1 second.
The Fly6 will emit a short beep to confirm the still image is
captured.
Image capture

Accessing your footage
After your ride, you can access your footage in a number of ways:
1. Connect the Fly6 to a PC or Mac using the USB cable.
2. Remove the microSD card and read data using your PC or Mac.
3. Using a Cycliq On The Go Card Reader.
Editing footage
You can edit your footage using the CycliqPlus desktop and mobile
app. From here you can also overlay Strava metrics and share
highlights from you ride.
Using your footage

Evidence makes a difference!
If you've had an incident on the roads, been subjected to a close
pass or capture any other dangerous activity, upload it to
www.UpRide.cc and use your footage to help make cycling safer.
Then share your UpRide with your community and help spread the
word. We are all in this together and we all have a role to play in
making the roads safer for all road users.
Record your ride. Make it count. UpRide it.
UpRide your ride

Specification
Feature
Lens angle
Video format
Lumens
Weight
Dimensions
Battery
Port
Bluetooth®BT 5.0
USB-C to charge & connect to PC & Mac
71mm (H) x 35mm (W) x 40mm (D)
2000mAh, 7.6Wh (up to 5 hours)
75.5g / 2.66oz
50lm max output
MP4
135° wide viewing angle
Recording 1920 x 1080p @ 30fps
1280 x 720p @ 60fps
Tech specs

C Y CLIQ. C O M
Scan for more information