CYP CLUX-4M User manual

CLUX-4M
1x4 HDMI 1.3 with
Multi-channels Splitter
Operation Manual
CLUX-4M

Revision History
Version No Date Summary of Change
V1 20081110 Preliminary Release
Precaution
Failure to follow the precautions described below may cause damage to
multi channel splitter and void the warranty.
 DO NOT open the case. Doing so will void the warranty. If you find
problem with it, please return back to your retailer or seller who will
assist you or provide you with solution.
 DO NOT use third-Party AC adapter or power cord. Doing so may
damage multi channel splitter.
 DO NOT bump, jar or drop contents of the products as it may
damage it and result in warranty void.
 DO NOT set any liquids or beverages on the drive as they may
damage multi channel splitter.

Table of Contents
1
1
1
1
2
3
3
4
4
4
1. Introduction…………………………………………………........……….
2. Application…………………………………………………................….
3. Contents……………………………………………….........................…
4. System Require…………………………………….…………........…….
5. Features…………………………………………….......……........………
6. Operation Controls and Functions…………………………………….
6.1 Front Panel ...............................................................................
6.2 Rear Panel ………………………………………….........….….…
7. Connection and Installation…………………………….........……..…
8. Specications……………………………………………...........………..

1. Introduction
The HDMI v1.3 Multi-Channels Splitter the most advanced solution for HDMI
signal distribution. It is compatible to HDMI v1.3 specifications, a cutting-age
technology which defines the support to transfer Deep Color (10-bit and 12-
bit) video and new lossless compressed (Dolby TrueHD, Dolby Digital Plus and
DTS-HD Master Audio) digital audio, with a high bandwidth up to 225MHz
(6.75Gbps). Besides splitting and distributing, it also does signal amplification
and equalization to provide high performance I/O of audio and video.
Furthermore, it support up to 4 different HDMI output displays simultaneously
with a reset bottom for back up the image unity when in disorder.
Please follow this manual to begin enjoying the benefit of your HDMI 1.3 DA.
We suggest keeping it in a safe place for future reference.
2. Application
 Connect one source equipment to HDMI input and four HDMI/DVI
displayers to HDMI output for Multi-display instantly.
 For Multi-levels displays, just connect extra splitter.
 Back up display image
3. Contents
 HDMI v1.3 DA
 Operation Manual
 5V DC power supply adaptor
4. System Require
HDMI input source equipment and output HDTVs.
1

5. Features
 HDMI 1.3, HDCP1.1 and DVI1.0 compliant Receiver.
 Deep color video up to 12bit, 1080p@(24/60)Hz.
 One HDMI source to connect up to four HDMI displays simultaneously.
 HDCP keysets allows each output to work independently when
connecting to a HDMI display.
 Splits a HDMI source up to four outputs without signal loss.
 Supports DVI source and DVI display by using HDMI to/from DVI adaptor
cable.
 Dolby Digital, DTS digital audio transmission (32-192 kHz Fs sample rate).
 Supports a wide range of PC and HDTV resolutions from VGA to UXGA
and 480i to 1080p.
 HDMI cable distance test with 1080p/8bits resolution the, Input/Output
source can run up to 15/15 meters. If 1080p/12bits the Input/Output
source can run up to 10/15 meters.
 Can selected EDID source from TV or this splitter.
 Support CEC bypass.
 Support system reset function.
2

①HDMI Outputs 1: Connect each of the output ports to the HDMI display.
When more than one output connected, the HDMI outputs play identical
video signal simultaneously.
②HDMI Input: Connect input port to the HDMI or DVI output of your source
equipment such as DVD player or set-top-box.
③EDID Control switch: STD(INT) and TV (EXT), default setting is TV. When EDID
is on TV: Leave as it is if display is properly, unit will detect the first HDMI
output source's EDID and record in the unit. If the first detected output
source is DVI it will pass to next source until the fist HDMI is been detected.
The detection priority is HDMI v1.3 > v1.2 > DVI.
④System Reset: Switch to “ON”stage, the system will send the internal CEC
to the display within 8~10 minutes to force all the displays switch to HDMI
1 port. Meanwhile, the source CEC will not functional to the system. When
switch to “OFF”stage, the system reset function will terminate.
⑤Sync LED: The LED will illuminate when the HDMI source signal is
connected to the input port.
⑥Power LED Indicator: The LED will illuminate when the power is connected.
⑦Power: Plug the 5V DC power supply into the splitter and connect the
adaptor to AC wall outlet.
6. Operation Controls and Functions
6.1 Front Panel
1 2 3 4 5 6 7
HDMI
OUTPUT
HDMI
INPUT
1
STDTV ON OFF
EDID SYS. Reset
SYNC
POWER
DC 5V
CLUX-4M HDMI V1.3 Splitter
3

Frequency bandwidth 2.25Gbps (single link)
Input port 1x HDMI female port (Type A connector)
Output ports 4x HDMI female ports (signal link)
Power Supply 5VDC/2.6A (US/EU standards, CE/FCC/UL certified)
Dimensions (mm) 102(W) x 141(D) x 38(H)
Weight(g) 550
Chassis Material Metal
Silk Skin Color Black
Operating Temperature Operating from 0°C ~ 40°C
Power Consumption 10.5w(max)
6.1 Rear Panel
1
①HDMI Outputs 2/3/4: Connect each of the output ports to the HDMI
display. When more than one output connected, the HDMI outputs play
identical video signal simultaneously.
7. Connection and Installation
8. Specications
HDMI
HDMI
HDMI Cable
DVD or Set-Top-Box
HDTV HDMI display LCD TV
OR OR
HDMI
OUTPUT
HDMI
OUTPUT
HDMI
OUTPUT
3 24
4

20081120 MPM-CLUX4M
Home page: http://www.cypress.com.tw
CYPRESS TECHNOLOGY CO., LTD.