CYP CLUX-14EP User manual

CLUX-14EP
CLUX-14EP
1x4 HDMI
v1.3 Splitter
Operation Manual

1. Introduction................................................................................
2. Features......................................................................................
3. Operation Controls and Functions..........................................
3.1 Front Panel...........................................................................
3.2 Rear Panel............................................................................
4. Connection and Installation.....................................................
5. Specifications............................................................................
6. Cypress HDMI v1.3 Series........................................................
TABLE OF CONTENTS
1
1
2
2
3
4
4
6

1. Introduction
The HDMI Splitter is the most advanced solution to HDMI signal distribution. Each
product in this series is compliant with HDMI v1.3 and HDCP v 1.1 specifications.
It allows one HDMI source to connect up to four HDMI displays simultaneously.
2. Features
 HDCP1.3 and DVI1.0 compliant Receiver.
 Built-in HDCP keysets allows each output to work independently when
connecting to a HDMI display.
 Splits a HDMI source up to four outputs at 1080p without signal loss.
 Supports DVI source and DVI display by using HDMI to/from DVI adaptor
cable.
 Supports a wide range of PC and HDTV resolutions, from VGA to UXGA and
480p to 1080p.
 Deep color video 10bit, 1080p@60Hz and 12bit up to 1080i@60Hz.
 Can be cascaded for more outputs.
 Support muti-channel compressed and uncompressed HDMI audio.
 Full HDCP compliant.
 Enhance function for signal pre-emphasis.
1

2
3. Operation Controls and Functions
3.1 Front Panel
1 HDMI output Indicator: The LED will illuminate when the output sources
are been connected.
2 Audio EDID Switch: This system build-in standards audio EDID for 2
channels and multi channels support. In cases where the sources are
support multi channels and displays only support 2 channels. The user
can simply switch the audio EDID to 2 channels. When selected audio
EDID in 2 channels, the LED will illuminate in Red color. When selected
audio EDID in multi channels, the LED will illuminate in Green color.
3 Signal Enhancement/Indicator: Press “Enhance” button to improve signal
quality after long distance transmission.
4 Power switch: Press the switch to power on the unit.
1 2 3 4
1234
AUDIO EDID
2 CH /Multi
ENHANCE POWER
CLUX-14EP HDMI Splitter OUTPUT

3
3.2 Rear Panel
1 HDMI Input: Connect input port to the HDMI or DVI output of your source
equipment such as DVD player or set-top-box.
2 HDMI Outputs 1 to 4: Connect each of the output ports to the HDMI
display. When more than one output been connected, the HDMI outputs
play identical video signal simultaneously.
3 Power: Plug the 5V DC power supply into the splitter and connect the
adaptor to AC wall outlet.
1 2 3
OUT 4OUT 3OUT 2OUT 1INPUT
DC 5V

4
Input port
Output port
Power Supply
Dimensions (mm)
Weight(g)
Chassis Material
Silk Skin Color
Operating Temperature
1x HDMI female port (Type A connector)
4 x HDMI female ports (signal link)
5VDC/2.6A (US/EU standards, CE/FCC/UL certified)
206(W) x 111(D) x 32(H)
250g
Plastic
Silver
Operating from 0°C ~ 48°C
5. Specifications
4. Connection and Installation
LCD TV LCD TV LCD TV LCD TV
DVD 1

5

20071128 MPM-CLUX14EP
Home page: http://www.cypress.com.tw
CYPRESS TECHNOLOGY CO., LTD.
6. Cypress HDMI v1.3 Series:
Product Description
CLUX-11S 1x1 HDMI V1.3 Repeater
CLUX-12S 1x2 HDMI V1.3 Splitter
CLUX-14S 1x4 HDMI V1.3 Splitter
CLUX-18S 1x8 HDMI V1.3 Splitter
CLUX-21SY 2x1 HDMI V1.3 Switcher
CLUX-31S 3x1 HDMI V1.3 Switcher
CLUX-31SY 3x1 HDMI V1.3 Switcher
CLUX-41SY 4x1 HDMI V1.3 Switcher
CLUX-41AT 4x1 HDMI V1.3 Switcher with Digital Audio
CLUX-42S 4x2 HDMI V1.3 Switcher
CLUX-110S 1x10 HDMI V1.3 Splitter
CLUX-210S 2x10 HDMI V1.3 Splitter
CLUX-210T 2x10 HDMI V1.3 Splitter with Digital Audio