CYP PU-513L-KIT User manual

PU-513L-KIT
HDBaseT™ LITE Extender Kit with 1-way IR & RS-232
(up to 60m)
OPERATION MANUAL

DISCLAIMERS
The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer le, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.
© Copyright 2011 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sucient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE SUMMARY OF CHANGE
VS1 10/10/2012 First release
v1.01 31/07/2013 Added USB Power Cable
v1.02 03/10/2013 Added statement about RS-232 Adapters
v1.03 08/10/2013 Amended product description

CONTENTS
1. Introduction...........................................6
2. Applications ...........................................6
3. Package Contents ..................................6
4. System Requirements ...........................6
5. Features..................................................7
6. Operation Controls and Functions .......8
6.1 Transmitter Front and Rear Panels....... 8
6.2 Receiver Front and Rear Panels ............ 9
6.3 Transmitter and Receiver Top Panels 10
6.4 IR Pin Assignment....................................10
6.5 D-Sub 9 Pin Denitions .........................11
7. Specications...................................... 12
8. Connection and Installation .............. 13
9. Acronyms............................................. 14

6
1. INTRODUCTION
The PU-513L-KIT allows uncompressed HDMI, one-way IR and RS-232 signals
to be transmitted over a Single CAT5e/6/7 cable to distances of up to 60m.
Utilise the USB power output from a TV as an optional way of powering the
PU-513L-RX receiver unit alternative to a mains power supply.
Designed with HDBaseT™technology for greater exibility in custom
installations with full HDMI and control signal transfer over a single
CAT5e/6 Cable.
2. APPLICATIONS
Commercial and residential multi-room AV environments
University lecture hall display and control
Retail sales display and control
Meeting room presentation and control
Commercial advertising display and control
3. PACKAGE CONTENTS
1× HDMI to CAT5e/6 with IR/RS-232 Transmitter
1× CAT5e/6 to HDMI with IR/RS-232 Receiver
1× IR Blaster
1× IR Extender
1× 3.5 mm mini-jack to RS-232 female cable
1× 3.5 mm mini-jack to RS-232 male cable
2× 5V/2.6 A DC Power Adaptor
Operation Manual
4. SYSTEM REQUIREMENTS
HDMI source equipment such as DVD/Blu-ray player/PC and TV/Monitor/
Projector with HDMI input and HDMI and CAT5e/6 connection cables.

7
5. FEATURES
HDMI 1.4 with 3D, 4K×2K support, HDCP and DVI compliant
Supports HDMI 1.4 (including HDCP) over a single CAT5e/6/7 up to 60m
Complies with HDBaseT™- Lite specications
Full HD resolution support (1080p@60Hz/36-bit), 3D over 60m, 4Kx2K
over 40m and PC resolution support (VGA to WUXGA) over CAT5e/6
cable
HDMI input up to 15m with 8-bit deep colour, or 10m with 12-bit deep colour
Supports HDMI output up to 15m with 8/12-bit deep colour
Supports one-way IR and RS-232 Control
Supports High Denition LPCM 7.1CH, Dolby TrueHD, Dolby Digital
Plus and DTS-HD Master Audio transmission
Choose to power the PU-513L-RX via the USB output from a TV (Cable
available separately - APC-USB): Please note the performance and
consistency of USB power outputs from TV's can vary and cannot be
guaranteed by CYP.

8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Transmitter Front and Rear Panels
CAT5e/6 OUT
HDMI IN RS232 INIR OUT
LINK
DC 5V
HDMI to CAT5e/6 with
IR/RS232
TRANSMITTER
CAT5e/6 OUT
HDMI IN RS232 INIR OUT
LINK
DC 5V
HDMI to CAT5e/6 with
IR/RS232
TRANSMITTER
4 51 2 3
1
IR OUT
Connect to the supplied IR blaster for IR signal transmission to the source
equipment. Place the IR blaster in direct line-of-sight of the equipment
to be controlled.
2
HDMI IN
Connect to the HDMI input source devices such as a DVD player or a Set-
top Box with HDMI cable or DVI to HDMI cable.
3
RS 232 IN
Connect the 3.5mm mini-jack to D-Sub 9-pin female adaptor cable
(included in the package) to a PC or control system with D-Sub 9-pin
cable for the transmission of RS-232 commands.
4
DC 5V
Plug the 5V DC power supply into the unit and connect the adaptor to
an AC outlet.
5
CAT5e/6/7 OUT
Connect to the receiver unit with a single CAT5e/6 /7cable for
transmission of all data signals. The yellow LED will illuminate when
both the transmitter and receiver are connected and are powered. The
green LED will illuminate when the device is connected to the power
supply.

9
6.2 Receiver Front and Rear Panels
CAT5e/6 IN
LINK
DC 5V
CAT5e/6 to HDMI with
IR/RS232
HDMI OUT RS232 OUTIR IN
RECEIVER
CAT5e/6 IN
LINK
DC 5V
CAT5e/6 to HDMI with
IR/RS232
HDMI OUT RS232 OUTIR IN
RECEIVER
4 51 2 3
1
DC 5V
Plug the 5V DC power supply into the unit and connect the adaptor to
an AC outlet.
2
CAT5e/6/7 IN
Connect to the transmitter unit with a single CAT5e/6/7 cable for HDMI
Audio/Video and IR/RS-232 control signal transmission. The yellow LED
will illuminate when both the transmitter and receiver are connected and
are powered. The green LED will illuminate when the device is connected
to the power supply.
3
IR IN
Connect to the supplied IR receiver cable for IR signal reception.
Ensure that remote being used is within the direct line-of-sight of the
IR extender.
4
HDMI OUT
Connect to a HDMI equipped TV/monitor for display of the HDMI
input source signal.
5
RS 232 OUT
Connect the 3.5mm mini-jack to D-Sub 9-pin female adaptor cable
included in the package to a PC or control system with D-Sub 9-pin
cable for the transmission of RS-232 commands.

10
6.3 IR Pin Assignment
3
1
3
1
2
2
Power 5V
IR Blaster Signal
NC
IR Signal
Power 5V
Ground
IR Receiver
IR Emitter

11
6.4 D-Sub 9 Pin Denitions
Pin Dene TX / RX
1 N/C
2 TxD/RxD
3 RxD/TxD
4 N/C
5 GND
6 N/C
7 N/C
8 N/C
9 N/C
9 NC

12
7. SPECIFICATIONS
Video Bandwidth 300 MHz/9 Gbps
Transmitter
Input 1× HDMI, 1× RS-232
Output 1× RJ45, 1× IR Emitter
Receiver
Input 1× RJ45, 1× IR Receiver
Output 1× HDMI, 1× RS-232
ESD Protection Human Body Model:
±8kV (air-gap discharge)
±4kV (contact discharge)
Power Supply 2× 5 V/2.6 A DC for Transmitter and
Receiver (US/EU standards, CE/FCC/UL
certied)
Dimensions 55 mm (W) × 82mm(D) × 22.5mm(H)/each
Weight 56g (TX), 64g (RX)
Chassis Material Plastic
Silkscreen Colour White
Operating Temperature 0 ˚C~40 ˚C/ 32 ˚F~104 ˚F
Storage Temperature −20 ˚C~60 ˚C/−4 ˚F~140 ˚F
Relative Humidity 20~90 % RH (non-condensing)
Power Consumption 3 W (TX), 5.5 W (RX)

13
8. CONNECTION AND INSTALLATION
7m
3m
3m
60°
m
m
3m
1.5m
60°
RXL
TXL
RS-232
Cable
HD Monitor
3rd Party Equipment
requiring RS-232 Control
RS-232 Cable
CAT5e/6/7
(60m)
Power
Supply
Power
Supply
Blu-ray Player PC
IR Emitter
IR Receiver HDMI Cable
NOTE: The TX unit must have the Female D-sub connector tted, and the
RX the male D-sub connector. There are no baud rate settings required as
this is a pass through only

14
9. ACRONYMS
ACRONYM COMPLETE TERM
CAT5e Category 5 Cable
CAT6 Category 6 Cable
CEC Consumer Electronics Control
DVI Digital Visual Interface
HDCP High-bandwidth Digital Content Protection
HDMI High-Denition multimedia Interface
IR Infrared

CYP (UK) Ltd., Unit 7, Shepperton Business Park, Govett Avenue, Shepperton,
Middlesex, TW17 8BA
Tel: [phone] | Fax: [phone]
Email: [email protected]
www.cypeurope.com
v1.03