CYP CV-400H User manual

CV-400H
HDMI to Video Scan Converter
Operation Manual
Operation Manual

DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2011 by Cypress Technology.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
V1 15/07/10 Preliminary Release
VS2 01/12/10 Add HDCP Description
VR3 23/08/11 Cancel HDCP Complaint
VS4 19/04/13 Updated Format & Diagrams

CONTENTS
1. Introduction............................................ 1
2. Applications........................................... 1
3. Package Contents ................................ 1
4. System Requirements............................ 1
5. Features.................................................. 2
6. Operation Controls and Functions....... 3
6.1 Top Panel ...........................................3
6.2 Front Panel.........................................4
6.3 Rear Panel .........................................4
7. Connection Diagram ............................ 5
8. Specications ........................................ 6
9. Acronyms ............................................... 7

1
1. INTRODUCTION
This HDMI to Composite Converter will convert an HDMI digital signal
to an analog NTSC or PAL signal with analog (L/R) stereo audio. This
device provides the ability to convert a high denition signal to a
standard denition resolution (480i or 576i) for use with DVRs or VCRs.
The device is HDMI and DVI compliant and has features such as
3D noise reduction, frame rate conversion, adaptive contrast
enhancement as well as a simplied on-screen display (OSD) allowing
easy display of current settings.
2. APPLICATIONS
• HDMI signal conversion to Composite NTSC or PAL signal
• Digital audio signal conversion into analog audio signal
• HD CCTV conversion for composite distribution
3. PACKAGE CONTENTS
• HDMI to Composite Converter Box
• 5 V/1 A DC Power Adaptor
• Operation Manual
4. SYSTEM REQUIREMENTS
Source equipment such as an HD Video Camera with an HDMI cable
and output display (TV/Monitor) with composite & L/R cables.

2
5. FEATURES
• HDMI and DVI compliant
• Converts video signal from HDMI source to NTSC or PAL signal
• Converts digital audio from HDMI source to analog stereo audio
• Accepts a wide range of HDTV input resolutions, from 480p to
720p@60 Hz and PC from VGA@60 Hz to WXGA@60 Hz
• Underscan/Overscan option
• 3D noise reduction in both temporal and spatial domain
• Arbitrary frame rate conversion
• Adaptive contrast enhancement
Note: This product does not convert HDMI signals with HDCP
encryption. When receiving content that has HDCP encryption there
will be no video output.

3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Top Panel
NTSC/PAL
HDMI to VIDEO
1 2
1NTSC/PAL BUTTON
Press once to display the current video standard and resolution
settings on the on-screen display (OSD). Press again while the
OSD is on screen to change the setting to NTSC or PAL. When the
OSD is not displayed, press and hold for 3 seconds to select the
underscan/overscan function.
2POWER LED
The green LED will illuminate when connected to a power supply.

4
6.2 Front Panel
HDMI IN DC 5V
1 2
1HDMI IN
Connect to a source device such as HD camera player with an
HDMI output with an HDMI cable.
2DC 5V
Connect the 5 V DC power supply to the unit and plug the adaptor
into AC wall outlet.
6.3 Rear Panel
OUTPUT
RLVIDEO
1
1R/L/VIDEO OUTPUT
Connect to a TV/monitor and/or AV receiver with R/L & composite
cable.

5
7. CONNECTION DIAGRAM
OUTPUT
RLVIDEO
HDMI IN DC 5V
HDMI Camera
(Non-HDCP Source)
HDMI Input
TV or Monitor
Composite
Video Output
Analog Stereo
Audio Output
Power Supply

6
8. SPECIFICATIONS
Input Port 1×HDMI,
Output Ports 1×CVBS, 1×L/R (RCA Jack)
HDMI Input Resolution 480p, 576p & 720p, VGA@60/72/75/85,
SVGA@56/60/72/75/85, XGA@60/70/75,
WXGA (1224×768/1280×768/1280×800)@60RB
/60
HDMI Input Audio LPCM 2CH, 48 kHz
Output Video NTSC/PAL
Output Audio Analog stereo
Power Supply 5 V/1 A (US/EU standards, CE/FCC/UL
certied)
ESD Protection Human body model:
±8 kV (air-gap discharge)
±6kV (contact discharge)
Dimensions 114 mm (W)×65 mm (D)×26 mm (H)
Weight 120 g
Chassis Material Plastic
Color White
Operating Temperature 0 °C~40 °C / 32 °F~104 °F
Storage Temperature −20 °C~60 °C / −4 °F~140 °F
Relative Humidity 20 ~ 90 % RH (non-condensing)
Power Consumption 3 W

7
9. ACRONYMS
ACRONYM COMPLETE TERM
HDCP High-bandwidth Digital Content Protection
HDMI High Denition Multimedia Interface
NTSC National Television System Committee
PAL Phase Alternating Line
SVGA Super Video Graphics Array
VGA Video Graphics Array
WXGA Wide Extended Graphics Array
XGA Extended Graphics Array

Home page: http://www.cypress.com.tw
CYPRESS TECHNOLOGY CO., LTD