CYP QU-8MS User manual

QU-8MS
1 to 8 HDMI Distribution Amplifier with System Reset
OPERATION MANUAL

3
DISCLAIMERS
The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer file, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.
© Copyright 2019 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.

4
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of fire,
electrical shock and injury to persons.
• To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufficient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE SUMMARY OF CHANGE
v2.00 05/07/2019 Updated Format/Diagrams

5
CONTENTS
1. Introduction...........................................6
2. Applications ...........................................6
3. Package Contents ..................................6
4. System Requirements ...........................7
5. Features..................................................7
6. Operation Controls and Functions.......8
6.1 Front Panel................................................... 8
6.2 Rear Panel..................................................... 9
7. Connection Diagram .......................... 10
8. Specifications...................................... 11
8.1 Technical Specifications ........................11
9. Acronyms............................................. 12

6
1. INTRODUCTION
The QU-8MS Distribution Amplifier (splitter) accepts one HDMI input and
splits this signal to eight identical outputs. This device is 3D compatible
and features a 3D signal indicator which confirms when a 3D source signal
is detected.
The System Reset Function switch generates a command every 10
minutes to the connected displays which resets them to the correct HDMI
input. Each buffered output can run 1080p/8-bit up to 15 metres and can
also be cascaded in multiple layers.
2. APPLICATIONS
Display HDMI and 3D content
Simultaneously display content on multiple screens.
Retail store/Conference/Advertising display
3. PACKAGE CONTENTS
1 by 8 HDMI 3D Splitter
Operation Manual
5V/3A DC Power Adaptor

7
4. SYSTEM REQUIREMENTS
HDMI source equipment such as a media player, video game console
or set-top box.
HDMI receiving equipment such as HDTVs, monitors or audio
ampliers.
The use of “Premium High Speed HDMI”cables is highly
recommended.
5. FEATURES
HDMI, HDCP 1.1 and DVI 1.0 compliant
Deep colour video up to 12bits, 1080p@24/60Hz
Supports 3D content with an LED indicator to indicate if the video is in
standard denition or 3D.
Allows one HDMI source to simultaneously connect with up to eight
HDMI displays
HDCP keysets allows each output to work independently when
connected to an HDMI display
Transmits an HDMI source to eight outputs without any signal loss
Supports DVI source / display by using an HDMI/DVI adaptor cable
Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD
master Audio transmission (32-192kHz sampling rate)
Supports a wide range of PC and HDTV resolutions from VGA to
WUXGA and 480i to 1080p
HDMI cable distance testing showed that with 1080p/8bits resolution,
the input source can be 15 metres away and with 1080p/12bits it can
be 10 metres away.
HDMI cable distance testing showed that with 1080p/8bits resolution,
the output source can be 15 metres away, and with 1080p/12bits it
can be 15 metres away.

8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
2 3 1 41
1HDMI OUT 7/8/1: Using HDMI cables connect these slots to displays
in order to show HDMI/3D content.
Note: When the input signal contains 3D data the display must support
3D content in order to display an image.
-A. This system was tested with 24AWG cables if using cables of
another type, the performance of this system may be dierent.
-B. Cable distance tested with a PS3 & 40”Samsung UA40B700 12 bits
LED TV.
-C. Figures provided in this manual are for reference only, actual
gures may depend on the source and display used along with the
cables specications.
2SYNC RED 3D ORG: This LED will turn red when the input signal is not
in 3D. If the input signal is 3D then the LED will change to orange.
3HDMI IN: This slot connects with source devices such as DVD/Blu-Ray
players in order to receive an HDMI signal.
4POWER LED & DC 5V: This slot is where you plug the 5V DC power
supply into the unit and connect the adaptor to an AC outlet. The LED
will switch on when power is ON.

9
6.2 Rear Panel
21 3
1EDID switch STD/TV: This switch allows the user to choose the EDID
settings, the device must be turned on then o in order to make these
changes take eect. By switching to TV the device will read the EDID
of HDMI output 1 and will record it, then it will have the source send
the signal to the other seven HDMI outputs. The default setting is TV
which supports 3D content, leave as is when the display is working
properly. By switching to STD the device will use the built-in EDID,
which is set at 1080p@60/12bits for video and LPCM 2Ch for audio, to
allow the source to send a signal to the connected displays.
2HDMI OUT 2~6: Using HDMI cables connect these slots to displays in
order to show HDMI/3D content.
Note: When the input signal contains 3D data the display must also have
3D support in order to receive the signal.
3SYS Reset ON/OFF: This switch allows the user to perform a system
reset. The default setting is OFF, leave as is when in normal use. By
switching ON, the unit will perform a reset every 8~10 minutes, in
order to perform this function the displays must have CEC support.
When performed successfully, the system will automatically switch the
displays to HDMI 1 input. The system reset will not perform on those
displays that do not have a CEC function.

10
7. CONNECTION DIAGRAM
Simultaneous
HDMI OUT
TV/Display TV/Display
TV/Display TV/Display TV/Display
TV/Display
Projector
Blu-Ray Player
Projector
Power
Supply
Simultaneous
HDMI Outputs
HDMI
Input

11
8. SPECIFICATIONS
8.1 Technical Specications
Video Bandwidth 225MHz/6.75Gbps
Input Port 1 x HDMI
Output Ports 8 x HDMI
ESD Protection Human body
model
±8kV (air-gap discharge) ±6kV
(contact discharge)
Power Supply 5V / 3A DC (US/EU standards, CE/FCC/
UL certified)
Dimensions(mm) 240 (W) x 103 (D) x 25(H)
Weight(g) 665
Chassis Material Metal
Silkscreen Colour Black
Operating Temperature 0°C~40°C / 32°F~104°F
Storage Temperature -20°C~60°C / -4°F~140°F
Power Consumption 10W
Relative Humidity 20 ~ 90% RH (non-condensing)

12
9. ACRONYMS
ACRONYM COMPLETE TERM
CEC Consumer Electronics Control
DVI Digital Visual Interface
EDID Extended Display Identication Data
HD High-Denition
HDCP High-bandwidth Digital Content Protection
HDMI High-Denition Multimedia Interface
LPCM Linear Pulse-Code Modulation
VGA Video Graphics Array (640×480@60Hz)
WUXGA Wide Ultra Extended Graphics Array
(1920×1200@60Hz)

13

14

15

16

17

18

19

20