CYP CM-330 User manual

NTSC/PAL Video to VGA
Converter
(CM-330)
Operation Manual
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

Introdu tion
This unit allows you to watch TV, play video games on your VGA PC (CRT) monitor
from any NTSC or PAL source.
It also enables you to add a Video-In feature to your VGA monitor. You may view
camcorder, VCR or DVD on your PC monitor.
Pre autions
1. Do not expose this product to direct sunlight.
2. Keep the unit away from radiator, heat sources and magnetic field.
3. Do not place it in very dusty or humid locations.
4. Use this unit in a horizontal position only.
5. Do not put heavy objects on top of the converter.
6. Put the unit in an open space that has good ventilation.
7. If the unit is acting abnormally keep the unit away from TV or other electronic
equipment.
8. Unplug the unit from the power supply when it is not to be used for a long period
of time.
Features
•The unit operates in NTSC 3.58, NTCS 4.43, PAL, PAL M, PAL N or SECAM
system automatically.
•High-resolution output picture.
•Palm size.
•Allows the user to Adjust Colour, Brightness, Contrast and NTSC Tint.
•Plug & Play - No driver software required.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

Operation ontrols and fun tions
Top Panel
1. Tint Indi ator- This indicator will light up when tint level is adjusted.
2. Colour Indi ator- This indicator will light up when the colour level is adjusted.
3. Bright Indi ator- This indicator will light up when the level of brightness is
adjusted.
4. Contrast Indi ator- This indicator will light up when the contrast level is
adjusted.
5. Effe t Indi ator- This indicator will light up when one of the built-in 5 effects is
selected.
6. Border Indi ator- This indicator will light up when the border function is
selected. Border will change when pushing decrease/add buttons from: Normal-
Red border- Green border- Blue border.
7. Sele t button- Push the button to choose which function is to be adjusted from:
Tint-Colour-Bright-Contrast-Effect-Border-Tint.
8. De rease button- Push this button if you would like to decrease the effect of the
selected control. E.g. Press the button if you would like to decrease the effect of
picture brightness.
9. Add button- Push this button if you would like to increase the effect of the
selected control.
* Push the Decrease and Add buttons together for more than 1 second and the
machine will reset.
* hen there is no signal input, the indicator 1-6 will light in sequence.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

Rear Panel
1. DC 7.5 V- This is the power supply input port.
2. S-Video Input- This is the S-Video input port. Using the appropriate connector
cable (4 Pin Din connector) connect the port to your input device.
3. Video Input- This is the composite Video input port. Using the appropriate
connector cable (RCA Jack) connect the port to your input device.
4. S/Video Input swit h- Switch the button to the type of video input selected.
5. VGA Output- This is the VGA output port. Using the appropriate connector
cable (15 Pin D Female connector) connect the port to your output device.
Conne tion and Installation
The AC adaptor power unit should not be plugged into a wall outlet until all connections
are complete.
-Connect the V-In or S-In port (Numbers 2/3 on the rear panel) to your video input
device.
-hen you have selected the input port, switch the S/Video input switch (Number 4
on the rear panel) to the selected input.
-Connect the VGA output port (Number 5 on the rear panel) to your VGA monitor
output device.
Once all connections are complete please connect the power supply provided to the
power socket.
NOTE- This model does not work with LCD panels.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

Spe ifi ations
Input signal 1 x Composite Video: 1 Vp-p 75 ohm RCA Jack.
1 x S-Video: Y/C In; 4 Pin Din connector.
Output signal 1 x VGA: 0.7 Vp-p RGB, 15 Pin D Female
connector.
Power supply DC 7.5V 500mA Center negative
Dimension 145 (D) x 90 ( ) x 33 (H) mm
A essory AC adapter, 1 set of video cable.
Weight 1 Kg
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv