CYP SY-P295 User manual

SY-P295
CV/SV to HDMI Converter and Scaler with Audio
OPERATION MANUAL

3
DISCLAIMERS
The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer file, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.
© Copyright 2019 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.

4
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of fire,
electrical shock and injury to persons.
• To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufficient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE SUMMARY OF CHANGE
v2.00 17/07/2019 First release

5
CONTENTS
1. Introduction...........................................6
2. Applications ...........................................6
3. Package Contents ..................................6
4. Requirements.........................................6
5. Features..................................................7
6. Operation Controls and Functions .......8
6.1 Front Panel................................................... 8
6.2 Rear Panel..................................................... 9
6.3 OSD Operation ........................................10
6.4 Reset Functionality .................................11
7. Connection Diagram .......................... 12
8. Specifications...................................... 13
8.1 Technical Specifications ........................13
8.2 Supported Resolutions..........................14
9. Acronyms............................................. 15

6
1. INTRODUCTION
The SY-P295N is designed to scale analogue video signal from a CV or SV
source to a digital HDMI output, boasting a wide-range of HDTV and PC
resolutions. Audio is combined with HDMI video output. This unit offers
a selection of colour space and adjustment to obtain the best picture
quality.
2. APPLICATIONS
SD Resolutions scaled to HD Resolutions
Integrate a legacy device into an HDMI system
3. PACKAGE CONTENTS
CV/SV to HDMI 1080p Scaler
5VDC Power Supply Adaptor
Operation Manual
Stereo Audio Cable (2RCA) x 1
Composite Video Cable X 1
4. REQUIREMENTS
Input source equipment such as VCR or Camcorder (without an HDMI
output) and output to HDTV or HD monitor with HDMI connection cables.

7
5. FEATURES
v1.2 HDMI, HDCP 1.1 and DVI 1.0 compliant
Analogue to HDMI Converter Scaler with Audio
Video Support: Input - PAL & NTSC. Output Resolution Supported:
-PC: VGA, SVGA, XGA, SXGA, UXGA, WXGA, WSXGA, WUXGA.
-SD/HD: 480i, 576i, 480p, 576p, 720p, 1080i and 1080p
Audio Support: Analogue Stereo, Digital stereo PCM, and DTS. Simply
select from the audio input source, this is then outputted to HDMI,
Optical (Toslink), and mini-jack (stereo only) simultaneously.
A comprehensive OSD menu provides picture adjustment on contrast,
brightness, hue, saturation, sharpness, RGB (colour tone) level and
aspect ratio size
Automatic detection of the connected screens factory setting,
matching the resolution and refresh rate, when the NATIVE output is
selected

8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
DC 5V
OPTICALRLSVCV
INPUT
1 2 3 4
1CV/SV Input: Connect the CV/SV port to the input port of your source
equipment such like DVD player.
2L/R Input: Connect the analogue audio input port to the output port
of your analogue audio equipment.
3TOSLink (optical fiber) Input: Connect the optical input port to the
digital audio output port of your source equipment.
4Power: Plug the 5VDC power supply into the unit and connect the
adaptor to AC wall outlet.

9
6.2 Rear Panel
HDMI AUDI
OI
NPUT
MENU +
-
OPTICAL
OUTPUT
1 2 3 4 5
1HDMI Output: Connect the HDMI output port to the HDMI input port
of your display such like HDTV.
2TOSLink (optical fiber) Output: Connect the optical output port to
the digital audio input port of your amplifier.
3Audio Output: Connect the PC 3.5mm mini-jack output port to the
analogue audio input port of your equipment.
4Menu Button: Press the MENU button to bring up OSD operation
menu. (See section “4.3 OSD Operation” for reference.)
5+/- Button:
-a. On the first tier of OSD menu, use + and – buttons to move up/
down the highlight item for selection.
-b. Once the desired option is selected, use + and – buttons to toggle
between setting values.
-c. Without OSD menu, press (INPUT) button to switch between CV
and SV.

10
6.3 OSD Operation
1st Tier Option 2nd Tier Option Adjustment
CONTRAST - 0 ~ 100 of Contrast Level
BRIGHTNESS - 0 ~ 100 of Brightness Level
FINETUNE - HUE 0 ~ 100 of Hue Level
- SATURATION 0 ~ 100 of Saturation Level
- SHARPNESS 0 ~ 100 of Sharpness Level
- EXIT Back to 1st Tier
COLOR - RED 0 ~ 100 of Red Colour Level
- GREEN 0 ~ 100 of Green Colour Level
- BLUE 0 ~ 100 of Blue Color Level
- EXIT Back to 1st Tier
SIZE - FULL / OVERSCAN / UNDERSCAN /
LETTERBOX / PANSCAN
OUTPUT - NATIVE / VGA / SVGA / XGA /
SXGA /UXGA / 480i / 480p /
720p@60Hz / 1080i@60Hz /
1080p@60Hz / 576i / 576p /
720p@50Hz / 1080i@50Hz /
1080p@50Hz / WXGA / WSXGA /
WUXGA
AUDIO - EAR PHONE / OPTICAL
OSD - HPOSITION 0 ~ 100 of OSD Horizontal Position
- VPOSITION 0 ~ 100 of OSD Vertical Position
- TIMER 0 ~ 100 of OSD Existing Time (sec.)
- BACKGROUND 0 ~ 100 of OSD Transparent Level
- EXIT Back to 1st Tier

11
1st Tier Option 2nd Tier Option Adjustment
INFORMATION - SOURCE (Input Interface)
INPUT (Input Resolution)
OUTPUT (Output Resolution)
VERSION (Firmware Version)
EXIT - Close OSD Menu
6.4 Reset Functionality
To reset the unit, press and hold the MENU button while plugging the
DC power into the unit to set the it back to factory default, with output
resolution as NATIVE. This feature is also useful when no picture is shown
as the output is scaled to a resolution not supported by the connected
TV/monitor, the standard NATIVE resolution should allow a picture to be
seen.

12
7. CONNECTION DIAGRAM
HDMI AUDIO INPUT
MENU +
-
OPTICAL
OUTPUT
DC 5V
OPTICALRLSVCV
INPUT
PSU
HDTV/Monitor Amplifier
HDMI
Output
Analogue
Audio
Output
Optical
Digital
Output
Composite
Video
Input
Analogue
Audio
Input
Optical
Digital
Input
S-Video Input
DVD Player
Camcorder

13
8. SPECIFICATIONS
8.1 Technical Specifications
Input ports 1 x CV/SV, 1 x R/L, 1 x TOSLink (optical fiber)
Output ports 1 x HDMI, 1 x 3.5mm Phone Jack, 1 x
TOSLink (optical fiber)
Power Supply 5V/2.6A DC (US/EU standards, CE/FCC/UL
certified)
Remote Control Discrete IR remote
Dimensions 102 mm (W) x 187 mm (D) x 25 mm (H)
Weight 405 g
Chassis Material Aluminum
Silkscreen Colour Silver
Operating Temperature 0 °C ~ 40 °C

14
8.2 Supported Resolutions
CV/SV INPUT HDMI OUTPUT
SD SD/HD PC
480i/576i (NTSC/PAL)  
480p/576p 
720p@(50/60) 
1080i@(25/30) 
1080p@(50/60) 
VGA@(60/72/75/85) 
SVGA@(56/60/72/75/85) 
XGA@(60/70/75/85) 
SXGA@(60/75/85) 
UXGA@60 
WXGA@60(1280x800) 
WSXGA@60(1680x1050) 
WUXGA@60(1920x1200) 

15
9. ACRONYMS
ACRONYM COMPLETE TERM
CV Composite Video
HDMI High-Definition Multimedia Interface
OSD On-screen Display
SV S-Video
VGA Video Graphics Array
WUXGA Wide Ultra Extended Graphics Array

CYP (UK) Ltd., Unit 7, Shepperton Business Park, Govett Avenue, Shepperton,
Middlesex, TW17 8BA
Tel: [phone] | Fax: [phone]
Email: [email protected]
www.cypeurope.com
v2.00