CYP CFSW-51MHL User manual

Operation Manual
Operation Manual
CFSW-51MHL
5 x 1 HDMI/MHL Fast Switcher

DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2011 by Cypress Technology.
All Rights Reserved.
Version 1.0 December 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE SUMMARY OF CHANGE
VR0 29/06/2012 Preliminary Release

CONTENTS
1. Introduction..............................................1
2. Applications.............................................1
3. Package Contents .................................. 1
4. System Requirements.............................. 1
5. Features.................................................... 2
6. Operation Controls and Functions......... 3
6.1 Front Panel ..........................................3
6.2 Rear Panel...........................................4
7. Remote Control........................................ 5
8. RS-232 Protocols ...................................... 6
8.1 Pin Assignment ...................................6
8.2 Commands.........................................6
9. Connection and Installation................... 8
10. Specications ........................................ 9
11. Acronyms ...............................................9

1
1. INTRODUCTION
This is ve inputs and one output HDMI fast switcher which has MHL
(Mobile High-Denition Link) support integrated on its fth input port.
With the MHL port, you can share high denition video and audio from
any of your MHL-ready mobile devices on an HDTV, and charge the
connected device at the same time. This switcher supports 3D signal
up to 2.25Gbps bandwidth, 12-bit Deep Color, Hi-Def lossless audio
and other features dened by HDMI v1.3 specications, on all of its
5 input ports. The operation of source selection can be done easily
through on-panel buttons, IR remote control, or RS-232 protocol.
2. APPLICATIONS
• Smart Home Entertainment
• Show room or meeting room
• Smart AV Installation
3. PACKAGE CONTENTS
•5 by 1 HDMI with MHL switcher
•5V DC power supply adaptor
•Remote Control CR-113 with battery
•Operation Manual
•IR Extender cable
•MHL to HDMI cable
4. SYSTEM REQUIREMENTS
•HDMI sources such as PS3 or Blu-ray players for 1 to 5 ports
HDMI type A inputs and the 5th port can connect to MHL
mobile device with a MHL to HDMI cable.
•Output HDMI type A port connect to the HDMI display/TV.
Input sources with HDMI/DVIconnector or MHL device.

2
5. FEATURES
• Supports InstaPort Technology™
• Supports ve HDMI type A with one MHL to HDMI port
• Supports one HDMI type A output
• Supports video resolution up to 1080p@60Hz
• Support HDMI specication features, including data rates up to
2.25Gbps, 12-bit Deep color
• Supports 3D
• MHL port support 1080p@30Hz or 1080i@60Hz
• MHL port can charge the connected mobile device

3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
12 3
5X1 HDMI/MHL FAST SWITCHER CFSW-51MHL
54321
POWER
INPUT
1Receiver
2Input selection buttons with LED:
Press input button to select input source, the Blue LED will illuminate
accordingly.
3Power button with LED:
Press this button to switch on the device or press it again to set it
to standby mode. When the system is switch to on the green LED
will illuminate.

4
6.2 Rear Panel
1
2 3 4 5
DC 5V
54321
MHL/HDMI
HDMI IN
HDMI OUT
RS232
IR IN
1RS232:
This slot is to connect to a PC or control system with D-Sub 9pin
cable for RS-232 control. For detail RS-232 commands please refers
to section 9.
2IR IN:
Connect to IR extender cable included in the package for
receiving IR remote signal of this device.
3HDMI OUT:
Connect to LCD TV or HD monitor with HDMI cable.
4HDMI IN:
Connect the equipments to the HDMI input ports 1 to 5 such as
DVD player, Blu-Ray, PS3 and other sources with HDMI cables. The
5th can be connected to HDMI/MHL mobile device.
Note: When MHL device is connected it will automatically be
charged, if the MHL device is switched off at the connection, it will
automatically be turned on.
5Power:
Plug the DC 5V power supply into the system and connect the
adaptor to AC wall outlet.

5
7. REMOTE CONTROL
1Power button:
Press this button to switch on
or turn the device to standby
mode.
2HDMI 1~5:
These buttons are the input
HDMI hot switching keys for
selecting HDMI sources. Note:
for this model only 1~5 is
active.
3Mute / Vol + / Vol -:
These buttons are to control
the input source including DVD
or PS3 or Blu-ray player or even
MHL mobile’s volume by set it
to mute or add up or down the
sound.
4:
These buttons are to control the input source including DVD or
PS3 or Blu-ray or even MHL mobile’s play list by set it to backward,
play/pause and forward.
Note: In order for continuing control on the MHL mobile device
thescreen time out setting must set free.
5Input:
Press this button sequentially to select input source from 1 ~ 5.
6Menu:
Press this button to enter into the input source including DVD or PS3
or Blu-ray or even MHL mobile’s root menu.
7▲▼◄► & Enter:
These buttons are to control the input source including DVD or PS3
or Blu-ray or even MHL mobile’s OSD selection.
Note: In order to activate the functions 3~6, input source device
must compliance with the following
1. HDMI control (CEC/Via Link…etc) must switch on.
2. Must accept CEC command
8Exit:
Press this button to exit the selection .
Menu Input
HDMI 1 HDMI 2 HDMI 3
HDMI 6
HDMI 4 HDMI 5
Vol +
HDMI 7 HDMI 8
Mute
Vol -
Exit
Enter
CR-113
1
2
4
5
7
3
6
8

6
8. RS-232 PROTOCOLS
8.1 Pin Assignment
CFW-51MHL
►
◄
Remote Control
PIN Assignment PIN Assignment
1 NC 1 NC
2 TxD 2 RxD
3 RxD 3 TxD
4 NC 4 NC
5 GND 5 GND
6 NC 6 NC
7 NC 7 NC
8 NC 8 NC
9 NC 9 NC
Baud Rate: 19200bps
Data Bit: 8 bits
Parity: None
Flow Control: None
Stop Bit: 1
8.2 Commands
Command Action
POWER 00 Power Off (standby)
POWER 01 Power On
PORT 01 Output Select Input 1
PORT 02 Output Select Input 2
PORT 03 Output Select Input 3
PORT 04 Output Select Input 4
PORT 05 Output Select Input 5

7
AUTO 00 AUTO switch off
AUTO 01 AUTO switch on
ISP 01 Software ISP process
RCP 00-7f RCP(remote command
protocol) command
Note: All the RS-232 command will be not executed unless
followed with a carriage return.
8.3 Remote Command Protocol
Opcode Key Name Opcode Key Name Opcode Key Name
0x00 Select 0x2B Enter 0x4D-0x4F Reserved
0x01 Up 0x2C Clear 0x50 Angle
0x02 Down 0x2D-02xF Reserved 0x51 Subpicture
0x03 Left 0x30 Channel Up 0x52-0x5F Reserved
0x04 Right 0x31 Channel Down 0x60 Play Function
0x05 Right-Up 0x32 Previous
Channel
0x61 Pause_Play
Func.
0x06 Right-Down 0x33 Sound Select 0x62 Record
Function
0x07 Left-Up 0x34 Input Select 0x63 Pause_
Record Func.
0x08 Left-Down 0x35 Show Info 0x64 Stop Function
0x09 Root Menu 0x36 Help 0x65 Mute Function
0x0A Setup Menu 0x37 Page Up 0x66 Restore_
Volume Func.
0x0B Contents
Menu 0x38 Page Down 0x67 Tune Function
0x0C Favorite
Menu 0x39-0x3F Reserved 0x68 Select_Media Func.
0x0D Exit 0x40 Reserved 0x69 Reserved
0x0E-0x1F Reserved 0x41 Volume Up 0x6A Reserved
0x20 Numeric 0 0x42 Volume Down 0x6B-0x70 Reserved
0x21 Numeric 1 0x43 Mute 0x71 F1
0x22 Numeric 2 0x44 Play 0x72 F2
0x23 Numeric 3 0x45 Stop 0x73 F3
0x24 Numeric 4 0x46 Pause 0x74 F4
0x25 Numeric 5 0x47 Record 0x75 F5
0x26 Numeric 6 0x48 Rewind 0x76-0x7D Reserved

8
0x27 Numeric 7 0x49 Fast Forward 0x7E Vendor_
0x28 Numeric 8 0x4A Eject Specic
0x29 Numeric 9 0x4B Forward 0x7F Reserved
0x2A Dot 0x4C Backward
9. CONNECTION AND INSTALLATION
OR
DC 5V
54321
MHL/HDMI
HDMI IN
HDMI OUT
RS232
IR IN
MHL to HDMI
HDMIHDMIHDMI
HDMI
HDMI
IR Receiver
DVD
DVD
Blu-ray
Set-top Box
HDMI

9
10. SPECIFICATIONS
Video Bandwidth 225MHz/6.75Gbps
Input Ports 5 x HDMI type a connector
Output port 1 x HDMI
Support Timing PC: VGA~WUXGA@60RB
480i/p, 576i/p, 720p@50/60/120,
1080i@50/60, 1080p@24/30/50/60
(MHL SUPPORTS ONLY 1080p@30 & 1080i@60)
ESD Protection Human body model:
±8 kV (air-gap discharge)
±4 kV (contact discharge)
Power Supply 5V/2.6A DC (US/EU standards, CE/
FCC/UL certied)
Dimensions (mm) 240 mm(W) x 110 mm(D) x 49 mm(H)
Weight(g) 792
Chassis Material Metal
Silkscreen Color Black
Operating Temperature 0˚C~40˚C / 32˚F ~ 104˚F
Storage temperature -20˚C~60˚C / -4˚F ~ 140˚F
Relative Humidity 20~90% RH (no condensation)
Power Consumption 3W
11. ACRONYMS
ACRONYM COMPLETE TERM
MHL Mobile High-Denition Link

10

Home page: http://www.cypress.com.tw
CYPRESS TECHNOLOGY CO., LTD
MPM-CFSW51MHL