Cypress Hills AXCRGREY03 User manual

GREYSTONE COFFEE TABLE
ASSEMBLY INSTRUCTIONS
MODEL # AXCRGREY03

DO NOT RETURN
FOR REPLACEMENT PARTS OR OTHER INQUIRIES
PLEASE CONTACT US AT:
1-800-667-8992
PLEASE ENSURE TO HAVE THE COLLECTION
NAME AND DESCRIPTION FROM THE
PACKAGING OR INSTRUCTION BOOKLET

IMPORTANT : Please read this manual carefully before beginning
assembly of this product. Keep this manual for future reference.
Identify all the parts and hardware. Do not discard of the packaging until you
have checked that you have all of the parts and hardware required.
Hardware package may have spare parts.
WARNING: This item contains small parts which can be swallowed by
children and pets. Keep children and pets away during assembly. To avoid
danger of suffocation, always keep plastic bags away from children and pets.
We recommend that you assemble this unit on a carpeted floor to avoid
scratches. If using power tools, set the tool to low torque to avoid damage.
May require 2 people for ease of assembly.
SAFETY INFORMATION

Perhaps the greatest environmental damage to wood furniture comes from wide swings in
relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity
rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and
contracts unequally along different grain directions. As humidity changes, the components
of wooden objects are continually pushing and pulling against each other. This pressure
often results in parts of furniture no longer fitting together closely or becoming distorted
or breaking from their own internal stresses.
The response to relative humidity changes begins with determining the annual average RH
for your particular space. Then try to keep the RH in the space where your furniture is as
close to that average as possible, generally within about 10% up or down. De-humidify in
the summer and humidify in the winter.
Be aware that raising the temperature lowers the humidity and vice versa. Thus, modern
heating systems, which can drive down interior RH in the winter, almost invariably cause
problems for furniture. To counteract their effect, you can either modify the RH by keeping
furniture containing spaces cooler in the winter or most importantly, have a good working
humidifier for your home. A humidistat automatically works to balance the humidity in
your home so it is constant. Dry indoor air can suck enough moisture from its surroundings
to do permanent damage to wood, causing it to crack or split.
Remember, that not all woods are created equal. Two factors that help determine how
rapidly a wood will lose moisture are pore size and surface hardness. A piece made from a
dense and hard wood will dry less rapidly than pieces made from softer woods.
Furniture that is sealed and lacquered will lose moisture more slowly than an unfinished
piece while pieces with veneer finishes are not only stronger, but lose moisture more
slowly than other finishes.
To help protect your wood furniture, take these steps:
Use a humidifier, preferably one with an automatic control system that can sense the
humidity level and adjust itself accordingly. Don't over-humidify; that can damage wood
by causing it to expand and contract.
Keep furniture out of direct sunlight, which can cause it to dry out, crack and warp.
If you can avoid it, don't put furniture near heating vents. If you must, keep the piece 3
to 4 inches away from the wall, giving the heat and air space to circulate.
Dust with soft dry cloth.
Do not use liquid or aerosol products.
CARE and MAINTENANCE
IMPORTANT : Please read this manual carefully before beginning
assembly of this product. Keep this manual for future reference.

PART DESCRIPTION
PRE-ASSEMBLY INFORMATION MODEL # AXCRGREY03
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-800-667-8992.
BOTTOM SHELF
QTY 1
DIVIDER (L&R Same)
QTY 2
DRAWER FRONT
QTY 4
SIDE (L&R Same)
QTY 2
DRAWER BOTTOM
QTY 4
LEFT DRAWER SIDE
QTY 4
ABC
DE FL
GH
TOP
QTY 1
DRAWER BACK
QTY 4
RIGHT DRAWER SIDE
QTY 4
FR

HARDWARE DESCRIPTION
ALLEN KEY SCREW
M6 X 30mm
QTY 34
ALLEN KEY
QTY 1
123
4
Required -
Flathead screwdriver
Phillips screwdriver
Not Included
CAM LOCK PIN
CAM LOCK
QTY 22 SETS
HANDLE
M4 X 25mm
QTY 4 SETS
PRE-ASSEMBLY INFORMATION MODEL # AXCRGREY03
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-800-667-8992.

A
D
A
C
B
D
COMPONENTS-KEY DIAGRAM MODEL # AXCRGREY03
E
F
L
F
R
G
H

ASSEMBLY MODEL # AXCRGREY03
STEP-1
STEP-2
1. Attach four Cam Lock Pins 3 to back of Drawer Front E .
2. Align Cam Lock Pins with pre-drilled holes and attach Drawer Sides FL , FR .
3. Insert two Cam Locks 3 into pre-drilled holes on each Drawer Side FL , FR .
4. Use flathead screwdriver to secure Cam Locks.
1. Slide Drawer Bottom H firmly into slots on Drawer Sides FL , FR
and Drawer Front E .
E
3
H
E
F
L
F
R
F
L
F
R

ASSEMBLY MODEL # AXCRGREY03
STEP-3
STEP-4
1. Align Drawer Back G with Drawer Bottom H and press firmly into slot.
2. Attach Drawer Back G using two Allen Key Screws 1 through pre-drilled holes
on each Side FL , FR .
3. Use Allen Key 2 to tighten Screws. Do not over-tighten.
NOTE: The screwdriver is not
included in the hardware pack.
1. Use phillips screwdriver to attach Handle 4 to Drawer Front E .
Repeat Step 1 - 4 for other three drawers.
G
H
1
2
F
L
F
R
E
4

STEP-5
STEP-6
1. Attach three Cam Lock Pins 3 to each Side A using guide holes.
2. Align Cam Lock Pins with pre-drilled holes on Bottom Shelf C .
3. Insert six Cam Locks 3 into pre-drilled holes on Bottom Shelf C .
4. Use flathead screwdriver secure Cam Locks.
1. Attach Dividers D to Bottom Shelf C using six Allen Key Screws 1
(three screws on each divider).
2. Use Allen Key 2 to tighten Screws. Do not over-tighten.
3AC
A
C
D
D
ASSEMBLY MODEL # AXCRGREY03
2
1

STEP-7
1. Attach Top B to Sides A and Dividers D using twelve Allen Key Screws 1
(three screws on each Side and Divider).
2. Use Allen Key 2 to tighten screws. Do not over-tighten.
2
1
1
2
B
A
D
A
ASSEMBLY MODEL # AXCRGREY03
D

STEP-8
1. Insert assembled drawers into glides on assembled table.
ASSEMBLY MODEL # AXCRGREY03
X
Note: Levelers on bottom of legs can be adjusted if floor is uneven.