Cypress CAPSENSE EXPRESS CY3218-CAPEXP1 User manual

CY3218-CAPEXP1 CAPSENSE®EXPRESS™ EVALUATION KIT
QUICK START GUIDE
1. Insert the AAA battery.
2. Remove the jumper from J2.
3. Observe that the Power LED
lights up.
1. Touch the CapSense buttons to
change the status of the respective
LEDs.
2. Press the mechanical button S1
to light up all status LEDs.
Insert the kit CD and run the CD’s
autorun utility.
Open the guide and install PSoC
Programmer and PSoC Designer.
1
2
3
4

© 2009-2012 Cypress Semiconductor Corporation. All rights reserved. All trademarks or registered
trademarks referenced herein are the properties of their respective owners. Doc.#: 001-44769 Rev. *E
http://www.cypress.com/go/CY3218-CAPEXP1
For the latest information about this kit, visit
CY3218-CAPEXP1 CAPSENSE EXPRESS EVALUATION KIT
QUICK START GUIDE
Top View Bottom View
Status LEDs
Backlighting LEDs
Mechanical Button
CapSense Buttons Power Selection Jumper (J2)
Power LED CapSense Express
AAA Battery Holder (J1)
I2C Header (J5)