D-Link DU-560M User manual

3050 Ver.CPUTEK-PK-MAN-0223
USBModem
QuickInstallationGuide

2
TableofContents
3
3
4
4
4
5
6
6
7
7
8
8
Introduction
Features
SystemRequirements
LEDsofFrontPanel
SocketsofRearPanel
PackageChecklist
Installation
HardwareInstallation
Installation ProcedureforWindows2000
Installation ProcedureforWindows98
Installation ProcedureforWindowsME
Installaiton ProcedureforWindowsXP
ModemDailingLocation
ForWIN2000/XP
ForWIN98/ME

3
Voice
Voice/Audiomode.
Full-Duplexspeakerphone
SystemRequirements
Windows98,Windows2000,
WindowsME,WindowsXP
USBPort
Introduction
Features
Thismodemsupportsthefollowing communication
standards.ITU-TisalsoknownasCCITT.
Data
V.92
V.90,V.34,V.32bis,V.32,V.22bis,V.21,V.22
Bell 103 &212A
V.44,V.42bis&MNP5(Datacompression)
V.42 &MNP2-4(Errorcorrection)
Fax
V.17 (14400bpsFAX)
V.29 (9600bpsFAX)
V.27 (4800bpsFAX)

4
DATA DataTransmission indicator
CDCarrierDetectindicator
OH Off Hook
MRModemReady
PWRPowerReady
SocketsofRearPanel
PHONEPhonejack
LINE Telephonelinejack
USBUSBConnector
MICMicrophonejack
SPKSpeaker(forStereoonly)jack
LEDsofFrontPanel
PackageChecklist
OneUSBmodem/OneUSBcable/OnePhoneCable
OneCDDriver/User’smanual

5
Installation
1.Plugthedevice terminaloftheUSBcableintotheconnector
marked(3)on thebackofthemodem.
2.Plug theotherend ofthiscableintotheUSBporton the
backofyourcomputer.
3.Plug oneend ofthephonecableintothemodem’sLINE
jack(2).Plug theotherend intothephoneoutlet.
4.Tousetelephoneand themodemon thesameline,plug one
end oftheoptionalphonecableintothePHONEjack(1)on
themodem;plug theotherend intothephone.Liftthe
telephonehandsetand listenforaDIALTONEtocheckthe
connection.
Hardware Installation

6
InstallationProceduresforWindows98
InstallationProceduresforWindows2000
1.Once you havecompletedthehardwareinstallation,switch
on yourcomputerand puttheCDintotheCD-ROM.The
wizardsearchesfornewhardware.ClickNext.
2.SelectSearchforasuitabledriverformydevice
(recommended)and clickNext.
4.ClickBrowsetosearchfordriverfilesand openit.
e.g., D:\DRIVER\win2000.CilckOK.
5.Windowsfound thedriverofthismodem.ClickNext.
3.SelectSpecifyalocation and clickNext.
6.ClickYesforDigitalSinature.
7.ClickFinishtocompletetheinstallation .
3.SelectSpecifyalocation (PleaseclickBrowsetosearch
fordriverfilesand openit.e.g.,D:\DRIVER\win98)and click
Next.
4.Windowsfound thedriverofthismodem.ClickNext.
2.SelecttheSearchforthebestdriverforyourdevice
(Recommended)and clickNext.
1.Once you havecompletedthehardwareinstallation,switch
on yourcomputerand puttheCDintotheCD-ROM.The
wizardsearchesfornewhardware.ClickNext.
5.ClickFinishtocompletetheinstallation .

7
InstallationProceduresforWindowsXP
InstallationProceduresforWindowsME
1.Once you havecompletedthehardwareinstallation,switch
on yourcomputerand puttheCDintotheCD-ROM.The
wizardsearchesfornewhardware.Selectinstall fromalist
orspecificlocation (Advanced).ClickNext.
2.SelectSearchforthebestdriverintheselocationsand
Includethislocation inthesearch:(PleaseclickBrowseto
searchfordriverfilesand openit.e.g., D:\DRIVER\WinXP)
and clickNext.
3.ClickContinueAnyway.
4.ClickFinish.
4.ClickFinishtocompletetheinstallation.
3.Windowsfound thedriverofthismodem.ClickNext.
2.SelectSearchforthebestdriverforyourdevice
(Recommended)and Specifyalocation.(PleaseclickBrowse
tosearchfordriverfilesandopenit.e.g.,D:\DRIVER\winme)
and clickNext.
1.Once you havecompletedthehardwareinstallation,switch
on yourcomputerand puttheCDintotheCD-ROM.The
wizardsearchesfornewhardware.SelectSpecifythelocation
ofthedriver(Advanced)and clickNext.

8
ForWIN98/ME
Please click Control
Panel->Modems->Under
General click Dialing
Properties , and then you
can change your location.
ForWIN2000/XP
PleaseclickControl
Panel->PhoneAn d
ModemOptions->Under
Dialing RulesclickEdit ,
and thenyou canchange
yourlocation.
**Ifyouwanttochangeyourdialinglocation,please
followtheinstructions:
ModemDialingLocation