D-Link DI-808HV User manual

1
This product can be set up using
any current web browser, i.e.,
Internet Explorer 6 or Netscape
Navigator 6.2.3.
8-Port Broadband
VPN Router
5V DC Power Adapter
Check Your Package Contents
DI-808HV 8-Port BroadbandVPN Router
CD-ROM (containing Manual and Warranty)
Ethernet (CAT5 UTP/Straight-Through) Cable
Using a power supply
with a different voltage
rating will damage this
product and void the warranty
If any of the above items are missing, please contact your reseller.
DI-808HV
©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and
specifications subject to change without notice. DI-808HV. 09192003
1. Thank you for purchasing this Router to share your high-speed Internet connection
with other computers. To share high-speed Broadband access, you must have
either an Ethernet-based cable or DSL modem with an established Internet account
from an Internet Service Provider (ISP).
2. It is best to use the same computer that is connected to your modem for
configuring the DI-808HV. The DI-808HV acts as a DHCP server and will assign all
the necessary IP address information on your network. See Appendix at the end
of this Quick Installation Guide or the Manual on the CD-ROM for setting each
network adapter to automatically obtain an IP address.

2
Connecting The DI-808HV 8-Port Broad-
band VPN Router To Your Network
B. WAN PORT This is
for the connection of an
Ethernet cable to the
Cable or DSL modem
C. LAN PORTS These are the connections for
Ethernet cables to Ethernet enabled computers.
D. COM Port Used to
connect to an external
dial-up modem.
Reset Button
Pressing this button restores
the Router to its original factory
default settings.
A. Receptor for
Power Adapter.
A. First, connect the power adapter to the receptor at the back panel of the
DI-808HV and then plug the other end of the power adapter to a wall outlet or
power strip. The Power LED lights up indicating proper operation.
B. 1. Power off your cable or DSL modem; devices that do not have a on/off switch
will require you to unplug the power adapter. Now, the DI-808HV should be
powered on and the cable / DSL modem should be turned off.
cable / DSL modem (Power Off) – DI-808HV (Power On)
2.Connect an Ethernet cable to the Ethernet jack located on the cable / DSL
modem. After the Ethernet cable is securely connected, power on the cable / DSL
modem by turning on the unit or plugging in the power adapter.
cable / DSL modem (Power On) – DI-808HV (Power On)
3. Insert the other end of the Ethernet cable to the WAN PORT on the back panel
of the DI-808HV. The WAN LED light will illuminate to indicate proper connection.
If the WAN LED is not illuminated, please check your Ethernet connection or go
back to step B1 and repeat the steps.
C. Insert an Ethernet cable to LAN Port 1 on the back panel of the DI-808HV and an
available Ethernet port on the network adapter in the computer you are using to
configure the DI-808HV. The LED light for LAN Port 1 illuminates to indicate proper
connection. (Note: The LAN Ports on the DI-808HV are Auto MDI/MDIX. Meaning
you can use a straight-through or crossover Ethernet cable in the LAN Ports.)
D. COM Port for dial-up Internet connection.

3
Restart Your Computer
Connecting Additional Computers To
The DI-808HV
Using additional Ethernet (CAT5 UTP) cables, connect your Ethernet-equipped
computers to the remaining Ethernet LAN ports on the back panel of the DI-808HV.
Power LED – a solid
light indicates a proper
connection to the
power supply.
WAN LED – a solid
light indicates
connection on the
WAN port. This
LED blinks during
data transmission.
Local Network LEDs – a solid
light on the port indicates a
connection to an Ethernet
enabled computer on ports 1-8.
This LED blinks during data
transmission.
StatusStatus
StatusStatus
Status – will flash
consistently to indicate
that the DI-808HV is
working properly.
COM LED – a solid light
indicates a proper
connection to a dial-up
modem.
The LAN Ports on the DI-808HV are Auto MDI/MDIX. Meaning you can
use a straight-through or crossover Ethernet cable in the LAN Ports.)

4
When you have completed the steps in this Quick Installation
Guide, your connected network should look similar to this:
Using The Setup Wizard
The logon pop-up screen will appear.
Open your Web browser and
type “http://192.168.0.1” into the
URL address box. Then press the
Enter or Return key.
Type “admin” for the username and
leave the password field blank.
Click OK

5
The Setup Wizard (continued)
Once you have logged in, the
Home screen will appear.
You will see the following screens
Set up your new password.
You have the option to
establish a password.
Click Run Wizard
Click Next
Click Next

6
The Setup Wizard (continued)
You may manually select an Internet
connection type in this menu.
Click Next
Choose your time zone from the
drop down list.
Click Next
If you are unsure of which
setting to select, please contact
your Internet Service Provider.
A this point, the setup wizard will try to
auto-detect your Internet connection type.
If you have a Dynamic IP Address or
PPPoE connection, you will be brought to
the corresponding page.

7
The Setup Wizard (continued)
If your ISP provides a Static IP
Address, and this option is
selected, then this screen will
appear:
Enter the IP address information
originally provided to you by your
ISP. You will need to complete all
the required fields.
Click Next
If you selected Dynamic IP
Address, this screen will appear:
(Used mainly for Cable Internet
service.)
Click the “Clone MAC Address”
button to automatically copy the
MAC address of the network
adapter in your computer. You can
also manually type in the MAC
address.
Click Next
This setup should be done on the computer
that is registered on the ISP’s network.

8
The Setup Wizard (continued)
If your ISP uses PPPoE (Point-to-
Point Protocol over Ethernet), and
this option is selected, then this
screen will appear (Used mainly for
DSL Internet service):
Please be sure to remove
any existing PPPoE client
software installed on your
computers.
Enter in the username (PPPoE
Account) and password provided to
you by your ISP.
Click Next
Click Next
Configure this section only if you
have an analog dial-up account.
Otherwise click Next to skip.

9
Your Setup is Complete!
Test Internet Connection.
You will be returned to the Home tab.
For additional settings or
information, refer to the
Advanced, Tools, or
Status tabs on the web-
management interface; or
to the Manual located on
the CD.
Relaunch your Web
browser (i.e., Internet
Explorer or Netscape
Navigator), to link to your
favorite Web site to test
your Internet connection.
Click to Exit
Click Restart

10
To connect to the network, make sure the network adapter in your
computer is configured properly. Here’s how to configure the network
adapter to obtain an IP address automatically for the DI-808HV 8-
Port Broadband VPN Router.
APPENDIX (continued)
Restart your computer
Click OK
Click Internet Protocol (TCP/IP)
Click Properties
Select Obtain an IP address
automatically
For Microsoft Windows XP: Go to Start >
right-click on My Network Places > select
Properties > right-click on the Network
Connection associated with the Ethernet
adapter and select Properties (i.e., D-Link
DFE-530TX+).