D-Link DIR-330 - Wireless G VPN Router User manual

2D-Link DIR-330 Quick Install Guide
Package Contents
If any of the above items are missing, please contact your reseller.
• D-Link DIR-330 Wireless VPN Router
• Power Adapter
• Ethernet Cable
• Manual and Warranty on CD
Note: Using a power supply with a different voltage rating than the one
included with the DIR-330 will cause damage and void the warranty for this
product.
System Requirements
Network Requirements
• An Ethernet-based Cable or DSL modem
• 10/100 Ethernet devices
• 802.11g/b wireless clients
Web-based Configuration Utility Requirements
Computer with the following:
• Windows®, Mac OS, or Linux-based operating system
• An installed Ethernet adapter
Browser Requirements:
• Internet Explorer 7.0 or higher
• Firefox 3.0.5 or higher
• Chrome 1.0.154.43 or higher
Make sure that you have the latest version of Java installed. Visit www.java.
com to download the latest version.

3 D-Link DIR-330 Quick Install Guide
The D-Link wireless router lets you access your network using a wireless
connection from virtually anywhere within the operating range of your wireless
network. Keep in mind, however, that the number, thickness and location of
walls, ceilings, or other objects that the wireless signals must pass through,
may limit the range. Typical ranges vary depending on the types of materials
and background RF (radio frequency) noise in your home or business. The
key to maximizing wireless range is to follow these basic guidelines:
1. Keep the number of walls and ceilings between the D-Link router and
other network devices to a minimum. Each wall or ceiling can reduce your
adapter’s range from 3-90 feet (1-30 meters.) Position your devices so
that the number of walls or ceilings is minimized.
2. Be aware of the direct line between network devices. A wall that is 1.5
feet thick (.5 meters), at a 45-degree angle appears to be almost 3 feet (1
meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick.
Position devices so that the signal will travel straight through a wall or
ceiling (instead of at an angle) for better reception.
3. Building Materials make a difference. A solid metal door or aluminum
studs may have a negative effect on range. Try to position access points,
wireless routers, and computers so that the signal passes through drywall
or open doorways. Materials and objects such as glass, steel, metal, walls
with insulation, water (fish tanks), mirrors, file cabinets, brick, and concrete
will degrade your wireless signal.
4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical
devices or appliances that generate RF noise.
5. If you are using 2.4GHz cordless phones or X-10 (wireless products
such as ceiling fans, lights, and home security systems), your wireless
connection may degrade dramatically or drop completely. Make sure your
2.4GHz phone base is as far away from your wireless devices as possible.
The base transmits a signal even if the phone is not in use.
Wireless Considerations

4D-Link DIR-330 Quick Install Guide
Hardware Overview
LEDs
WLAN LED
A solid light indicates that the wireless
segment is ready. This LED blinks
during wireless data transmission.
Status LED
A blinking light indicates
that the DIR-330 is ready.
Internet LED
A solid light indicates connection on
the Internet port. This LED blinks
during data transmission.
Power LED
A solid light indicates a
proper connection to the
power supply.
Local Network LEDs
A solid light indicates a connection
to an Ethernet-enabled computer
on ports 1-4. This LED blinks
during data transmission.

5 D-Link DIR-330 Quick Install Guide
Hardware Overview
Connections
Reset
Pressing the Reset button
restores the router to its
original factory default
settings.
Power Receptor
Receptor for the supplied
power adapter.
LAN Ports (1-4)
Connect Ethernet devices such
as computers, switches, and
hubs.
Internet Port
The auto MDI/MDIX Internet port
is the connection for the Ethernet
cable to the cable or DSL modem.
* The USB port is currently inactive.

6D-Link DIR-330 Quick Install Guide
Connect to your Network
If you are connecting the router to a cable/DSL/satellite modem,
please follow the steps below:
1. Place the router in an open and central location. Do not plug the
power adapter into the router.
2. Turn the power off on your modem. If there is no on/off switch, then
unplug the modem’s power adapter. Shut down your computer.
3. Unplug the Ethernet cable (that connects your computer to your
modem) from your computer and place it into the Internet port
on the router.
4. Plug an Ethernet cable into one of the four LAN ports on the router.
Plug the other end into the Ethernet port on your computer.
5. Turn on or plug in your modem. Wait for the modem to boot (about
30 seconds).
6. Plug the power adapter to the router and connect to an outlet or
power strip. Wait about 30 seconds for the router to boot.
7. Turn on your computer.
8. Verify the link lights on the router. The power light, Internet light,
and the LAN light (the port that your computer is plugged into)
should be lit. If not, make sure your computer, modem, and router
are powered on and verify the cable connections are correct.

7 D-Link DIR-330 Quick Install Guide
Using the Setup Wizard
Open your web browser and
type http://192.168.0.1 into
the URL address box. Press
Enter.
Type admin for the
username and leave
the password blank.
The logon pop-up screen will appear:
Once you have logged in, the Setup screen will appear:
Click Setup Wizard
*PPTP, L2TP, Russian PPPoE, and Russian PPTP Internet configurations referenced
in this section do not apply in North America.

8D-Link DIR-330 Quick Install Guide
Create a new password and then click Next to continue.
Click Next
Select your time zone from the drop-down menu and then click Next to
continue.
Click Next
Select the type of Internet connection you use and then click Next to
continue.
Click Next to continue.
Click Next
Click Next

9 D-Link DIR-330 Quick Install Guide
If you selected Dynamic, you may need to enter the MAC address of the
computer that was last connected directly to your modem. If you are currently
using that computer, click Clone Your PC’s MAC Address and then click
Next to continue.
The Host Name is optional but may
be required by some ISPs.The default
host name is the device name of the
Router and may be changed.
If you selected PPPoE, enter your PPPoE username and password. Click
Next to continue. Select Static if your ISP assigned you the IP address,
subnet mask, gateway, and DNS server addresses.
Note: Make sure to remove your PPPoE
software from your computer.The software
is no longer needed and will not work
through a router.
Click Next
Click Next
If you selected PPTP, enter your PPTP settings supplied by your ISP and
your PPTP username and password. Click Next to continue.
Click Next

10D-Link DIR-330 Quick Install Guide
Click Next
If you selected Big Pond, select your authentication server from the drop down
menu. You will also need to enter your Big Pond username and password.
Click Next to continue.
Click Next
If you selected L2TP, enter your L2TP settings supplied by your ISP and your
L2TP username and password. Click Next to continue.
If you selected Static, enter your network settings supplied by your Internet
provider. Click Next to continue.
Click Next