D-Link DSL-2600U User manual

Quick Installation Guide
DSL-2600U
ADSL/Ethernet Router with Wi-Fi

DSL-2600U Quick Installation Guide
BEFORE YOU BEGIN
Delivery Package
•Wireless router DSL-2600U
•Power adapter DC 12V/0.5A
•R -11 telephone cable
•Ethernet cable (CAT 5E)
•Splitter
•“Quick Installation Guide” (brochure)
If any of the items are missing, please contact your reseller.
The “User Manual” and “Quick Installation Guide” documents in Russian
and English are available on D-Link website (see ftp.dlink.ru/pub/ADSL/DSL-
2600U/Description/).
!Using a power supply with a different voltage rating than the one
included will cause damage and void the warranty for this product.
Default Settings
I address of router 192.168.1.1
Username (login) admin
assword admin
Name of wireless network (SSID) DSL-2600U
2

DSL-2600U Quick Installation Guide
System Requirements and Equipment
•A computer with any operating system that supports a web browser.
•A web browser to access the web-based interface of the router: Windows
Internet Explorer, Mozilla Firefox, or Opera.
•A NIC (Ethernet or Wi-Fi adapter) to connect to the router.
•A 802.11b, g, or n Wi-Fi adapter to create a wireless network.
3

DSL-2600U Quick Installation Guide
CONNECTING TO C
PC with Ethernet Adapter
1. Make sure that your PC is powered off.
2. Connect an Ethernet cable between the Ethernet port located on the back
panel of the router and the Ethernet port of your PC.
3. Connect a phone cable between the DSL port of the router and the ADSL
OUT port of the splitter. Connect your phone to the PHO E port of the
splitter. Then connect another phone cable between a phone jack and the
ADSL I port of the splitter.
4. Connect the power cord to the power connector port on the back panel of
the router, then plug the power adapter into an electrical outlet or power
strip.
5. Turn on your PC and wait until your operating system is completely
loaded.
Now you should configure your PC to obtain an IP address automatically (as
DHCP client).
4

DSL-2600U Quick Installation Guide
Obtaining P Address Automatically
in OS Windows XP
1. Click the Start button and proceed to the Control anel > Network
and Internet Connections > Network Connections window.
2. In the Network Connections window, right-click the relevant Local
Area Connection icon and select the roperties line in the menu
displayed.
3. In the Local Area Connection roperties window, on the General
tab, select the Internet rotocol (TC /I ) line. Click the roperties
button.
5

DSL-2600U Quick Installation Guide
4. Select the Obtain an I address automatically and Obtain DNS
server address automatically radio buttons. Click the OK button.
5. Click the ОК button in the connection properties window.
Now your computer is configured to obtain an IP address automatically.
6

DSL-2600U Quick Installation Guide
Obtaining P Address Automatically
in OS Windows 7
1. Click the Start button and proceed to the Control anel window.
2. Select the Network and Sharing Center section. (If the Control Panel
has the category view (the Category value is selected from the View by
drop-down list in the top right corner of the window), choose the View
network status and tasks line under the Network and Internet
section.)
3. In the menu located on the left part of the window, select the Change
adapter settings line.
4. In the opened window, right-click the relevant Local Area Connection
icon and select the roperties line in the menu displayed.
5. In the Local Area Connection roperties window, on the
Networking tab, select the Internet rotocol Version 4 (TC /I v4)
line. Click the roperties button.
7

DSL-2600U Quick Installation Guide
6. Select the Obtain an I address automatically and Obtain DNS
server address automatically radio buttons. Click the OK button.
7. Click the OK button in the connection properties window.
Now your computer is configured to obtain an IP address automatically.
8

DSL-2600U Quick Installation Guide
PC with Wi-Fi Adapter
1. To connect the router to a DSL line: connect a phone cable between the
DSL port of the router and the ADSL OUT port of the splitter. Connect
your phone to the PHO E port of the splitter. Then connect another
phone cable between a phone jack and the ADSL I port of the splitter.
2. To connect the router to an Ethernet line: connect the Ethernet cable
between the Ethernet port located on the back panel of the router and the
Ethernet line.
3. Connect the power cord to the power connector port on the back panel of
the router, then plug the power adapter into an electrical outlet or power
strip.
4. Turn on the router by pressing the O /OFF button on its back panel.
5. Turn on Wi-Fi by pressing the relevant button on the back panel of the
router.
6. Turn on your PC and wait until your operating system is completely
loaded.
7. Turn on your Wi-Fi adapter. As a rule, modern notebooks with built-in
wireless NICs are equipped with a button or switch that turns on/off the
wireless adapter (refer to your PC documents). If your PC is equipped
with a pluggable wireless NIC, install the software provided with your
Wi-Fi adapter.
Now you should configure your Wi-Fi adapter.
9

DSL-2600U Quick Installation Guide
Configuring Wi-Fi Adapter in OS Windows XP
1. Click the Start button and proceed to the Control anel > Network
and Internet Connections > Network Connections window.
2. Select the icon of the wireless network connection and make sure that
your Wi-Fi adapter is on.
3. Search for available wireless networks.
4. In the opened Wireless Network Connection window, select the
wireless network DSL-2600U and click the Connect button.
After that the Wireless Network Connection Status window appears.
!
If you perform initial configuration of the router via Wi-Fi connection,
note that immediately after changing the wireless default settings of the
router you will need to reconfigure the wireless connection using the
newly specified settings.
10

DSL-2600U Quick Installation Guide
Configuring Wi-Fi Adapter in OS Windows 7
1. Click the Start button and proceed to the Control anel window.
2. Select the Network and Sharing Center section. (If the Control Panel
has the category view (the Category value is selected from the View by
drop-down list in the top right corner of the window), choose the View
network status and tasks line under the Network and Internet
section.)
3. In the menu located on the left part of the window, select the Change
adapter settings line.
4. In the opened window, select the icon of the wireless network connection
and make sure that your Wi-Fi adapter is on.
5. To open the list of available wireless networks, select the icon of the
wireless network connection and click the Connect To button or left-
click the network icon in the notification area located on the right side of
the taskbar.
11

DSL-2600U Quick Installation Guide
6. In the opened window, in the list of available wireless networks, select
the wireless network DSL-2600U and click the Connect button.
7. Wait for about 20-30 seconds. After the connection is established, the
network icon will be displayed as the signal level scale.
!
If you perform initial configuration of the router via Wi-Fi connection,
note that immediately after changing the wireless default settings of the
router you will need to reconfigure the wireless connection using the
newly specified settings.
12

DSL-2600U Quick Installation Guide
CONFIGURING ROUTER
Connecting to Web-based nterface
1. Start a web browser.
2. In the address bar of the web browser, enter the IP address of the router
(by default, the following IP address is specified: 192.168.1.1). Press
the Enter key.
3. On the opened page, enter the username (login) and password for the
administrator account (by default, the following username and password
are specified: admin, admin). Then click the Enter link.
!
If the error “ The page cannot be displayed ” (or “ Unable to display the
page ”/“ Could not connect to remote server ”) occurs upon connecting to
the web-based interface of the router, make sure that you have properly
connected the router to your computer.
!
It is strongly recommended to change the administrator password upon
initial configuration of the router. To do this, click the Configure
manually button and proceed to the System / Administrator
password page.
13

DSL-2600U Quick Installation Guide
After successful registration the router's quick settings page opens.
On the page, you can proceed to the Wizards (use the Connect to internet,
Host site, and Configure Wi-Fi buttons) or switch to the standard web-
based interface of the router by clicking the Configure manually button.
After clicking the button, the system statistics page opens. The page displays
general information on the router and its software, and data on the DSL
connection state.
To get back to the quick settings page from any Wizard or web-based interface
menu section, left-click the D-Link logo in the top left corner of the page.
The web-based interface of the router is multilingual. Select a needed language
from the menu displayed when the mouse pointer is over the Language
caption. You can change the language of the web-based interface in any menu
item.
After selecting the language, the notification on unsaved changes will be
displayed. Click the Save button to save the current language of the web-
based interface as the default language.
14

DSL-2600U Quick Installation Guide
Configuring Connection to the nternet
!
You should configure your WAN connection in accordance with data
provided by your Internet service provider (ISP). Make sure that you
have obtained all necessary information prior to configuring your WAN
connection. Otherwise contact your ISP.
ADSL WAN Connection
1. Go to the Net / WAN page and click the Add button.
2. From the Connection Type drop-down list, select the needed value.
3. From the ort drop-down list, select the DSL(new) value.
4. Specify a name for your connection (any name for easier identification) in
the Name field.
5. In the ATM section, specify the VPI and VCI in the relevant fields, and
then select a method of encapsulation from the Encapsulation Mode
drop-down list.
15

DSL-2600U Quick Installation Guide
6. For the oE and oA connection types, enter authorization data
provided by your ISP in the section (the username (login) in the
Username field and the password in the assword and assword
confirmation fields). If these data have not been provided by your ISP,
select the Without authorization checkbox.
7. For the I oA and Static I connection types, fill in the I Address,
Netmask, and Gateway I address fields in the I section.
8. Deselect the NAT checkbox in the Miscellaneous section if your ISP
requires you to disable the network address translation function.
9. Click the Save button.
16

DSL-2600U Quick Installation Guide
Ethernet WAN Connection
1. Go to the Advanced / Interface grouping page.
2. Select the LAN choice of the Ethernet WAN port radio button and
click the Save button.
3. Go to the Net / WAN page and click the Add button.
4. From the Connection Type drop-down list, select the needed value.
5. From the ort drop-down list, select the LAN value.
6. Specify a name for your connection (any name for easier identification) in
the Name field.
7. For the oE connection type, enter authorization data provided by
your ISP in the section (the username (login) in the Username
field and the password in the assword and assword confirmation
fields). If these data have not been provided by your ISP, select the
Without authorization checkbox.
17

DSL-2600U Quick Installation Guide
8. For the Static I type, fill in the I Address, Netmask, and Gateway
I address fields in the I section.
9. Deselect the NAT checkbox in the Miscellaneous section if your ISP
requires you to disable the network address translation function.
10. Click the Save button.
18

DSL-2600U Quick Installation Guide
Configuring Local Area Network
1. Go to the Net / LAN page. If needed, change the IP address of the
router's LAN interface and the mask of the local subnet in the I
Address and Netmask fields. Then click the Save button.
2. By default, the DHCP server of the router is enabled. In the DHC
server section, you can change the parameters of the DHCP server. If
you want to manually assign IP addresses to devices of your LAN,
disable the DHCP server (select the Disable value from the Mode drop-
down list).
3. After specifying the DHCP server settings, click the Save button.
19

DSL-2600U Quick Installation Guide
Configuring Wireless Network
By default, the wireless network of the router is open (it requires no password
to access it). To avoid unauthorized access to your wireless local area network,
change the default settings of the router.
Example of Wireless Settings
1. Go to the Wi-Fi / Security settings page.
2. Select the W A2- SK value from the Network Authentication drop-
down list.
3. Enter a key (a password that will be used to access your wireless
network) in the Encryption Key SK field. Use digits and Latin
characters.
4. Select the AES value from the W A Encryption drop-down list.
5. Click the Change button.
!
If you perform initial configuration of the router via Wi-Fi connection,
note that immediately after changing the wireless default settings you
will need to reconfigure the wireless connection using the newly
specified settings.
20