D-Link DSL-2740U User manual

DSL-2740U Wireless Setup Guide
Step 1: Open your Internet browser (ex. Internet Explorer, Mozilla, Google Chrome, Safari) and type
in the Routers IP address in the address bar and press enter. (Default IP 192.168.1.1).
Step 2: Type in the User Account Credentials for the router, then click OK/Log In.
By default the Username is: admin and the Password is: admin

Step 3: On the left side of the screen after successfully logging in, click on Wireless Setup.
Step 4: Wireless Basic Settings
1. Ensure that Disable Wireless LAN Interface is un-ticked.
2. Band: 2.4 GHz (B+G+N)
3. SSID (Wireless network name) can be changed to whatever you want to call the wireless.
4. Click “Apply Changes”.
Note: Router will restart the WLAN (Wireless) after you click “Apply Changes”, takes 20
seconds.

Step 4: Wireless Security Settings
1. SSID Type: Root (Main Wireless)
2. Encryption: WPA2 Mixed/WPA2(AES)/WPA2(TKIP)
2.1. For Apple devices you will have to change the Encryption to WPA (AES)/WPA (TKIP)
3. WPA Authentication Mode: Personal (Pre-Shared Key)
4. Pre-Shared Key Format: Passphrase
5. Pre-Shared Key: must be a minimum of 8 characters
Note: Your wireless password will only be displayed in plain text the first time you type it in
your web browser.
6. Click “Apply Changes”.
Note: Router will restart the WLAN (Wireless) after you click “Apply Changes”, takes 20
seconds.