D-Link DSL-2740B User manual

D-Link Technical Support –How to configure Web Filtering. Page 1of 4
Web Filtering
This document will detail how to configure Web Filtering on the following models
DSL-2730B Revision T1 Firmware AU_2.00
DSL-2740B Revision F1 Firmware AU_2.00
DSL-2750B Revision B1 Firmware AU_2.00
NOTE:
The Web Filter feature cannot be configured to block websites to specific computers.
All computers on the network will be affected by the filter.

D-Link Technical Support –How to configure Web Filtering. Page 2of 4
1. Log in to the modem with the computer connected to the modem via Ethernet.
-URL: http://192.168.1.1 (default)
-Username: admin
-Password: admin (default)
2. Select the ADVANCED button in the top menu.

D-Link Technical Support –How to configure Web Filtering. Page 3of 4
3. Select PARENTAL CONTROL in the left menu, followed by the Block Website button.
4. Click ADD to create a new filter rule.

D-Link Technical Support –How to configure Web Filtering. Page 4of 4
5. Enter the URL of the website you wish to block access too e.g. http://www.youtube.com
-Select Schedule if you wish to set the filter to ‘always’ block the site or select a pre-configured schedule.
-Select Manual Schedule to create a new schedule in which the site will be blocked.
6. Once all information is set, click on APPLY to save the changes and verify whether the sites are being blocked.