D-Link DSL-2740U User manual

Quick Installation Guide
DSL-2740U
Wireless ADSL2+ Router with Ethernet WAN Support

DSL-2740U Quick Installation Guide
BEFORE YOU BEGI
Delivery Package
•Router DSL-2740U
•Power adapter DC 12V/0.5A
•RJ-11 telepho e cable
•Straight-through Ether et cable
•Splitter
•“Quick Installation Guide” (brochure).
If a y of the items are missi g, please co tact your reseller.
The “User Manual” a d “Quick Installation Guide” docume ts are available
o D-Li k website (see www.dli k.ru).
!Using a power supply with a different voltage rating than the one
included will cause damage and void the warranty for this product.
2

DSL-2740U Quick Installation Guide
Default Settings
IP address of wireless router 192.168.1.1
Username (login) admin
Password admin
ame of wireless network (SSID) DSL-2740U
etwork key (PSK)
see WPS PIN o the
barcode label o the
bottom pa el of the
device
3

DSL-2740U Quick Installation Guide
System Requirements and Equipment
•A computer with a y operati g system that supports a web browser.
•A web browser to access the web-based i terface of the router:
◦Apple Safari 8 a d later
◦Google Chrome 48 a d later
◦Microsoft I ter et Explorer 10 a d later
◦Microsoft Edge 20.10240 a d later
◦Mozilla Firefox 44 a d later
◦Opera 35 a d later.
•A NIC (Ether et or Wi-Fi adapter) to co ect to the router.
•A 802.11b, g, or Wi-Fi adapter to create a wireless etwork.
4

DSL-2740U Quick Installation Guide
CO ECTI G TO PC
PC with Ethernet Adapter
1. Make sure that your PC is powered off.
2. Co ect a Ether et cable betwee a y of four Ether et ports located o
the back pa el of the router a d the Ether et port of your PC.
3. To connect the router to a DSL line: co ect a pho e cable betwee the
DSL port of the router a d the ADSL OUT port of the splitter. Co ect
your pho e to the PHO E port of the splitter. The co ect a other
pho e cable betwee a pho e jack a d the ADSL I port of the splitter.
4. To connect the router to an Ethernet line: ru the I itial Co figuratio
Wizard a d select the router's LAN port that will be used as the WAN
port. The co ect the Ether et cable betwee the selected Ether et port
located o the back pa el of the router a d the Ether et li e.
5. Co ect the power cord to the power co ector port o the back pa el of
the router, the plug the power adapter i to a electrical outlet or power
strip.
6. Tur o the router by pressi g the O /OFF butto o its back pa el.
7. Tur o your PC a d wait u til your operati g system is completely
loaded.
Now you should co figure your PC to obtai a IP address automatically (as
DHCP clie t).
5

DSL-2740U Quick Installation Guide
Obtaining P Address Automatically
in OS Windows XP
1. Click the Start butto a d proceed to the Control Panel > etwork
and Internet Connections > etwork Connections wi dow.
2. I the etwork Connections wi dow, right-click the releva t Local
Area Connection ico a d select the Properties li e i the me u
displayed.
3. I the Local Area Connection Properties wi dow, o the General
tab, select the Internet Protocol (TCP/IP) li e. Click the Properties
butto .
6

DSL-2740U Quick Installation Guide
4. Select the Obtain an IP address automatically a d Obtain D S
server address automatically radio butto s. Click the OK butto .
5. Click the ОК butto i the co ectio properties wi dow.
Now your computer is co figured to obtai a IP address automatically.
7

DSL-2740U Quick Installation Guide
Obtaining P Address Automatically
in OS Windows 7
1. Click the Start butto a d proceed to the Control Panel wi dow.
2. Select the etwork and Sharing Center sectio . (If the Co trol Pa el
has the category view (the Category value is selected from the View by
drop-dow list i the top right cor er of the wi dow), choose the View
network status and tasks li e u der the etwork and Internet
sectio .)
3. I the me u located o the left part of the wi dow, select the Change
adapter settings li e.
4. I the ope ed wi dow, right-click the releva t Local Area Connection
ico a d select the Properties li e i the me u displayed.
5. I the Local Area Connection Properties wi dow, o the
etworking tab, select the Internet Protocol Version 4 (TCP/IPv4)
li e. Click the Properties butto .
8

DSL-2740U Quick Installation Guide
6. Select the Obtain an IP address automatically a d Obtain D S
server address automatically radio butto s. Click the OK butto .
7. Click the OK butto i the co ectio properties wi dow.
Now your computer is co figured to obtai a IP address automatically.
9

DSL-2740U Quick Installation Guide
PC with Wi-Fi Adapter
1. To connect the router to a DSL line: co ect a pho e cable betwee the
DSL port of the router a d the ADSL OUT port of the splitter. Co ect
your pho e to the PHO E port of the splitter. The co ect a other
pho e cable betwee a pho e jack a d the ADSL I port of the splitter.
2. To connect the router to an Ethernet line: ru the I itial Co figuratio
Wizard a d select the router's LAN port that will be used as the WAN
port. The co ect the Ether et cable betwee the selected Ether et port
located o the back pa el of the router a d the Ether et li e.
3. Co ect the power cord to the power co ector port o the back pa el of
the router, the plug the power adapter i to a electrical outlet or power
strip.
4. Tur o the router by pressi g the O /OFF butto o its back pa el.
5. Tur o your PC a d wait u til your operati g system is completely
loaded.
6. Tur o your Wi-Fi adapter. As a rule, moder otebooks with built-i
wireless NICs are equipped with a butto or switch that tur s o /off the
wireless adapter (refer to your PC docume ts). If your PC is equipped
with a pluggable wireless NIC, i stall the software provided with your
Wi-Fi adapter.
Now you should co figure your Wi-Fi adapter.
10