D-Link DWR-932M User manual

Section 1 - Introduction
1.1 Introduction
1.2 Specifications
>FDD-LTE/ TDD-LTE/ TD-SCDMA/ WCDMA supported
>Web sharing, can support up to 10 users at the same time
>3000mAh battery
>Max speed is as follows:
Support Network DownloadUpload
TDD-LTE 100Mbps 20Mbps
FDD-LTE 150Mbps50Mbps@ Bandwidth 20M(CAT4)
WCDMA21Mbps5.76Mbps
1.3 Package contents
-4G MiFi Router X 1
-User Manual X 1
-Battery X 1 -USB Cable X 1
1.4 Description of components
Label & Name Functions
1. Power Button
1
Press Power Button to power on/ off the device
Wake the device during sleep mode
Thank you for purchasing the Mobile Wi-Fi product. This Mobile Wi-Fi
brings you a high speed wireless network connectionand supports
FDD-LTE/TDD-LTE/TD-SCDMA/WCDMA. This documentwill help you
understand yourMobile Wi-Fi so you can start using it right away. Please
read this document carefullybefore using yourMobile Wi-Fi. All description
and userinterface is based on Windows 7. Formore details about the
network connection, please consult yourinternetservice provider.
42
7
6
5
3

1.5 Description of the LCD Screen
1.6 Application Scene
This equipment can support Windows XP, Vista, Win7, Win10,
Mac OS etc, and can support multiple connections via Wi-Fi or
USB at the same time. Below diagram is only for reference.
NOTE: Before using Wi-Fi connection, please make sure the
connecting device supports the Wi-Fi.
3. Charger/ USB
Interface
Charger interface
4. LCD DisplayTo instruct device conditions
5. TF Card Slots Place to insert TF card
6. ResetButton Press the Reset button for 3 seconds to restore factory
settings
USB interface between device and Client Terminal
7. SIM Card SlotPlace to insert the Micro-SIM card
2. WPS Button
Open the WPS function, devices AP related information
Press the WPS button for 3 seconds to open the WPS
function(PBC)
LCD screen indicator
information
1. Signal Indicator
2. BatteryIndicator
3. SMS Indicator
4.WiFi Indicator
5.ISP Info
6.Data Usage
7.Date & Time
21
4
5
6
7
3
Etisalat
0.00MB
Jul.01 09:00

1.7 Sleep Mode
When no devices are connected to the Wi-Fi hotspot for a certain
period of time, the device will enter sleep mode.
Section 2 - Installation Instructions
2.1 Installation of the Micro-SIM card, TF card
and Battery
• Open the back cover of the device.
• Remove the battery carefully.
• Put the Micro-SIM card into the SIM slot into the slot, be mindful of
the direction.
• Put the battery back and cover back on the equipment and close it.
2.2 Power ON/ OFF
Power ON: Long press the POWER Button for 5 seconds to turn on
the device, the battery light will light up.
Power OFF: Long press the POWER Button to turn the device off.
2.3 Charging
The equipment can be charged via either charger or USB port.
If the Mobile Wi-Fi has not been used for a long time or if the battery
is fully depleted, the Mobile Wi-Fi may not power on immediately
after the charger is plugged in. Please charge the battery for a while
before attempting to power on the Mobile Wi-Fi.
Method 1: Use the charger to charge the device
• Only use chargers compatible with the Mobile Wi-Fi and provided
by a designated manufacturer. Use of an incompatible charger or
one from an unknown manufacturer may cause the Mobile Wi-Fi to
malfunction, fail, or could even cause a fire. Such use voids all
warranties, whether expressed or implied, on the product.
• The charger is an optional accessory. If it is not included in the
package, you may contact an authorized dealer to buy a charger
compatible with the Mobile Wi-Fi.

Method 2: Charge the device through a computer connection.
• Use the data cable provided with your device to connect the Mobile
Wi-Fi to the computer.
NOTE: The normal usage will not be affected during charging.