Why can’t I access the web-based conguration utility?
Verify that http://XXXX.devicesetup.net/ has been correctly entered into
the browser (XXXX represents the last 4 characters of the MAC address). The
Wi-Fi Name(SSID), Wi-Fi Password, and device password are printed on the
device label on the bottom of your device.
Why can’t I access the Internet?
Power cycle your router and check your Internet access again. If you still can
not connect to the Internet, contact your Internet service provider.
What do I do if I forgot my device password or my Wi-Fi Password?
If you forgot your password, you must reset your router. This process will
change all your settings back to the factory defaults.
How do I restore the router to its factory default settings?
Locate the reset button. With the router powered on, use a paper clip to
hold the button down until the LED turns solid red. Release the button and
the router will go through its reboot process.
This D-Link product includes software code developed by third parties, including
software code subject to the GNU General Public License (“GPL”) or GNU Lesser General
Public License (“LGPL”). As applicable, the terms of the GPL and LGPL, and information
on obtaining access to the GPL code and LGPL code used in this product, are available
to view the full GPL Code Statement at:
https://tsd.dlink.com.tw/GPL
The GPL code and LGPL code used in this product is distributed WITHOUT ANY WAR-
RANTY and is subject to the copyrights of one or more authors. For details, see the GPL
code and the LGPL code for this product and the terms of the GPL and LGPL.
Written Oer for GPL and LGPL Source Code
Where such specific license terms entitle you to the source code of such software,
D-Link will provide upon written request via email and/or traditional paper mail the ap-
plicable GPL and LGPLsource code files via CD-ROM for a nominal cost to cover shipping
and media charges as allowed under the GPL and LGPL.
Please direct all inquiries to:
Snail Mail: Email:
Attn: GPLSOURCE REQUEST
D-Link Systems, Inc.
14420 Myford Road, Suite 100
Irvine, CA 92606
GPL Code Statement
FAQ
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) The device may not cause harmful interface, and
(2) this device must accept any interface received, including interface that
may cause undesired operation.
Technical Support
Having trouble installing your new product? D-Link’s website contains
the latest user documentation and software updates for D-Link products.
Customers can contact D-Link Technical Support through our website by
choosing the relevant region.
Contact Us
www.dlink.com/en/contact-us
United States
Website: http://support.dlink.com
