D-Link DES-6000 Series Mounting instructions

Written by: Simon Hsu
Dept. Technical Support
Updated: March 23, 2001
How to Update the Firmware
Update the PROM code:
 Modify the configure file (25.cfg) for PROM code updating
Specify the directory path and image file name for PROM code.
 Save your modification and Enable your TFTP server.
 Enter console program; select Update Firmware and Configuration
Files in the main menu.
 Set the Software Update Mode to “Network”.
 Specify the IP address of your TFTP server.
 In the Configuration File field, Set Use Config Files to “Enable”
 In File Name field, specify the path and file name of config file. The
following screen appears:
Code_type=PROM
Image_file="d:\des6000\6000prom.b13"
#Code_type=RUNTIME
#Image_file="d:\switch\des6000\des6000.b41"
#Code_type=CONFIG
#Image_file="g:\d-link\des-60~1\basic_25.bc"

Written by: Simon Hsu
Dept. Technical Support
Updated: March 23, 2001
 Press RESET SWITCH TO START UPDATE to initiate the update
sequence.
 Restart the switch. Check the version of PROM code. is it the correct
version you want to update?
Update the Runtime code:
 Modify the configure file (25.cfg) for RunTime code updating
Specify the directory path and image file name for RunTime code.
 Save your modification and Enable your TFTP server.
 Enter console program; select Update Firmware and Configuration
Files in the main menu.
 Set the Software Update Mode to “Network”.
 Specify the IP address of your TFTP server.
 In the Configuration File field, Set Use Config Files to “Enable”
 In File Name field, specify the path and file name of config file. The
following screen appears:
#Code_type=PROM
#Image_file="d:\des6000\6000prom.b13"
Code_type=RUNTIME
Image_file="d:\des6000\6000run.b41"
#Code_type=CONFIG
#Image_file="g:\d-link\des-60~1\basic_25.bc"

Written by: Simon Hsu
Dept. Technical Support
Updated: March 23, 2001
 Press RESET SWITCH TO START UPDATE to initiate the update
sequence.
 Restart the switch. Check the version of PROM code. is it the correct
version you want to update?