D-Link EasySmart DES-1100-16 Instruction Manual

DES-1100 Series Firmware Release Notes
1
These release notes include important information about D-Link switch firmware revisions. Please
verify that these release notes are correct for your switch:
- If you are installing a new switch, please check the hardware version on the device label;
make sure that your switch meets the system requirement of this firmware version. Please
refer to Revision History and System Requirement for detailed firmware and hardware
matrix.
- If the switch is powered on, you can check the hardware version by checking the device
information page on the web graphic user interface.
- If you plan to upgrade to the new firmware release, please refer to the Upgrade Instructions
for the correct firmware upgrade procedure.
For more detailed information regarding our switch products, please refer to Related
Documentation.
You can also download the switch firmware and technical documentation from
http://tsd.dlink.com.tw.
Content:
Revision History and System Requirement ......................................................................... 2
Upgrade Instructions....................................................................................................... 2
New Features ................................................................................................................. 3
Problem Fixed ................................................................................................................ 3
Known Issues................................................................................................................. 3
Related Documentation ................................................................................................... 3
Firm
ware Version:
v
1
.00.
1
1
Published:
Mar
.
21
, 20
1
1

DES-1100 Series Firmware Release Notes
2
Revision History and System Requirement:
Firmware Version Date Model Hardware Version
1.00.11 21-Mar-2011 DES-1100-16
DES-1100-24 A1
1.00.09
01-Sep-2011 DES-1100-16 DES-1100-24 A1
Upgrade Instructions:
You can download the firmware from D-Link web site http://tsd.dlink.com.tw, and upgrade
through web UI.
1. Connect a workstation installed with java SE runtime environment to any switch port of the
device.
2. Open the web browser from the workstation and enter the IP address of the switch. The
switch’s default IP address is 10.90.90.90.
3. Enter administrator’s password when prompted. The password is admin by default.
4. To update switch's firmware or configuration file, select Tools > Firmware Backup &
Upgrade from the banner.
5. Click Browse to browse your inventories for a saved firmware file, and then click Upgrade
after selecting the firmware file you want to restore.
6. Wait until the “Firmware Upgrade Successful.” message pops up and login again after device
boots up.

DES-1100 Series Firmware Release Notes
3
New Features:
Firmware
Version
New Features
1.00.11 Add function Management VLAN
1.00.09
First Release
Problem Fixed:
Firmware
Version
Problems Fixed
1.00.11
1.
When adding a port to a
new
VLAN
’
s untagged member, its
PVID
remains
1 as
in the default VLAN.
2. Wrong firmware version in device information page.
1.00.09 First Release
* D-Link tracking number is enclosed in ()
Known Issues:
Firmware
Version
Issues
1.00.11 N/A
1.00.09 First Release
Related Documentation:
- DES-1100 Series User Manual
- DES-1100 Series Getting Started Guide