Daewoo SD-9100 User manual

DVD-VIDEO PLAYER
SSDD--99110000//SSDD--33110000
Owner’s Manual
- Region code of DVD/Video player for home
is region “2” or ALL. In inserting a disc with
other region code, it does not operate. Please
only use a disc with region code 2 or ALL.
- is a ‘DO NOT’ mark. If this mark is
displayed in operating the product, please
wait for a while, then use it. If " DO NOT"
mark continues to be displayed in pressing
a button after that, it means the button does
not function in the currently played disc.
- Press a product button on the REMOTE then
use the product.
• DVD operation : [DVD] button
• Video operation : [VCR] button
DV6T712D-AQ/I(GB) 02.11.12 5:39 PM ˘ ` a mac001 300DPI 120LPI

Product information
1
Contents
Product Information
Important Safeguards ..................................................... 2
Advantages of This Product Are .... ............................ 5
Read Carefully before Using ......................................... 6
Identification of Controls ............................................... 7
Remote Control ................................................................9
Installation
Setting up your player................................................... 10
Connecting your player through extra equipment
(satellite system) ............................................................ 11
Connecting your player to the Hi-Fi system .............12
How to connect your player to another player,
How to connect your player to a camcorder ............ 13
Connecting Dolby Digital Amp with Digital Audio
Out Jack ........................................................................... 14
2nd Scart Socket ............................................................. 15
Basic Operation
Initial Installation ........................................................... 16
Setting time and date / Auto clock ............................ 17
OSD ON & OFF / Output Select ................................ 18
DVD Playback ................................................................ 19
VCR Playback ................................................................ 20
Recording ........................................................................ 21
VCR Operation
Tuning in New Stations ................................................ 23
Timer Recording ............................................................ 25
More Functions .............................................................. 28
Connections and Copying ........................................... 31
DVD Operation
Playing a desired scene ................................................ 33
Confirming the current PLAY mode on screen ....... 36
Selecting an AUDIO language, SUBTITLE language
and 3D AUDIO............................................................... 37
Selecting ZOOM and Multi Angle.............................. 38
About MP3 discs............................................................. 39
Displaying menus in a disc........................................... 40
Set-up
Language Setup.............................................................. 40
Video Setup, Audio Setup............................................ 41
Others Setup ................................................................... 42
The others
About DVD...................................................................... 43
Basic information about VCR and Videotape.......... 45
Before doubting about troubles (VCR)....................... 46
Before doubting about troubles (DVD) ..................... 48
Specifications .................................................................. 49
DV6T712D-AQ/I(GB) 02.11.12 5:39 PM ˘ ` 1 mac001 300DPI 120LPI

2
Important Safeguards
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and servicing
instructions in the literature accompanying the
appliance.
WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
IMPORTANT FOR LASER PRODUCTS
• LASER :
This Digital Video Disc Player employs a Laser System. To ensure proper use of this product
please read this owner’s manual carefully and retain for future reference. Should the unit
require maintenance, contact an authorized service location - see service procedure.
Use of control adjustments or the performance of procedures other than those specified
may result in hazardous radiation exposure.
To prevent direct exposure to the laser beam, do not try to open the enclosure. Visible laser
radiation when open and interlocks defeated.
DO NOT STARE INTO THE BEAM.
• DANGER : Visible laser radiation when open and interlock failed or
defeated. Avoid direct exposure to beam.
• CAUTION : Do not open the top cover. There are no user serviceable parts
inside the Unit; leave all servicing to qualified service personnel.
CLASS 1
LASER PRODUCT
CAUTION: Any changes or modification in construction of this device which are not expressly approved by
the party responsible for compliance could void the user’s authority to operate the equipment.
• Make sure the unit should be placed at least 8cm apart from the other home appliances or the
obstacles to get sufficient ventilation.
• This unit shall not be exposed to dripping or splashing and no objects filled with liquids, such
as vases, shall be placed on this unit.
• Switching it off does not disconnect it from the mains (stand-by). To disconnect it from the
mains, you have to unplug it.
DV6T712D-AQ/I(GB) 02.11.12 5:39 PM ˘ ` 2 mac001 300DPI 120LPI

Product information
3
Important Safeguards
This set has been designed and manufactured to assure
personal safety. Improper use can result in electric
shock or fire hazard. The safeguards incorporated in
this unit will protect you if you observe the following
procedures for installation, use and servicing. This unit
is fully transistorized and does not contain any parts
that can be repaired by the user.
1 READ INSTRUCTIONS
All the safety and operating instructions should be
read before the unit is operated.
2 RETAIN INSTRUCTIONS
The safety and operating instructions should be
retained for future reference.
3 HEED WARNINGS
All warnings on the unit and in the operating
instructions should be adhered to.
4 FOLLOW INSTRUCTIONS
All operating and use instructions should be
followed.
5 CLEANING
Unplug this unit from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
6 ATTACHMENTS
Do not use attachments unless recommended by
the unit’s manufacturer as they may cause
hazards.
7 WATER AND MOISTURE
Do not use this unit near water- for example, near
a bath tub, wash bowl, kitchen sink or laundry tub,
in a wet basement, or near a swimming pool.
8 ACCESSORIES
Do not place this unit on an
unstable cart, stand, tripod,
bracket, or table. The unit
may fall, causing serious
injury to a child or adult as well as serious damage
to the unit. Use this unit only with a cart, stand ,
tripod, bracket, or table recommended by the
manufacturer.
8A A unit and cart combination should be moved
with care. Quick stops, excessive force, and uneven
surfaces may cause the product and cart
combination to overturn.
9 VENTILATION
Slots and openings in the case are provided for
ventilation to ensure reliable operation of the unit
and to protect it from overheating. These openings
must not be blocked or covered. These openings
must not be blocked by placing the unit on a bed,
sofa, rug, or other similar surface. This unit should
never be placed near or over a radiator or heat
radiator. This unit should not be placed in a built-
in installation such as a bookcase or rack unless
proper ventilation is provided or the
manufacturer’s instructions have been adhered to.
10 POWER SOURCES
This unit should be operated only from the type of
power source indicated on the marking label. If
you are not sure of the type of power supply to
your home, consult your dealer or local power
company. For units intended to operate from
battery power, or other sources, refer to the
operating instructions.
11 GROUNDING OR POLARIZATION
This unit is equipped with a polarized alternating -
current line plug (a plug having one blade wider
than the other). This plug will fit into the power
outlet only one way.
This is a safety feature. If you are unable to insert
the plug fully into the outlet, try reversing the
plug. If the plug still fails to fit, contact your
electrician to replace your obsolete outlet.To
prevent electric shock, do not use this polarized
plug with an extension cord, receptacle, or other
outlet unless the blades can be fully inserted
without blade exposure. If you need an extension
cord, use a polarized cord.
12 POWER-CORD PROTECTION
Power-supply cords should be routed so that they
are not likely to be walked on or pinched by items
placed upon or against them, paying particular
attention to cords at plugs, convenience
receptacles, and the point where they exit from the
unit.
PORTABLE CART WARNING
(symbol provided by RETAC)
DV6T712D-AQ/I(GB) 02.11.12 5:39 PM ˘ ` 3 mac001 300DPI 120LPI

4
Important Safeguards
13 LIGHTNING
For added protection for this unit during a
lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the
wall outlet and disconnect the antenna or cable
system. This will prevent damage to the unit due
to lightning and power line surges.
14 DISC TRAY
Keep your fingers well clear of the disc as it is
closing. It may cause serious personal injury.
15 OVERLOADING
Do not overload wall outlets of extension cords as
this can result in a risk of fire or electric shock.
16 OBJECT AND LIQUID ENTRY
Never push objects of any kind into this unit
through openings as they may touch dangerous
voltage points or “short-out” parts that could
result in a fire or electric shock. Never spill liquid
of any kind on the unit.
17 BURDEN
Do not place a heavy object on or step on the
product. The object may fall, causing serious
personal injury and serious damage to the product.
18 DISC
Do not use a cracked, deformed or repaired disc.
These discs are easily broken and may cause
serious personal injury and product malfunction.
19 SERVICING
Do not attempt to service this unit yourself as
opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
20 DAMAGE REQUIRING SERVICE
Unplug this unit from the wall outlet and refer
servicing to qualified service personnel under the
following conditions.
A. When the power-supply cord or plug is
damaged.
B. If liquid has been spilled, or objects have fallen
into the unit.
C. If the unit has been exposed to rain or water.
D. If the unit does not operate normally by
following the operating instructions. Adjust
only those controls that are covered by the
operating instructions. Improper adjustment of
other controls may result in damage and will
often require extensive work by a qualified
technician to restore the unit to its normal
operation.
E. If the unit has been dropped or the cabinet has
been damaged.
F. When the unit exhibits a distinct change in
performance-this indicates a need for service.
21 REPLACEMENT PARTS
When replacement parts are required, have the
service technician verify that the replacements he
uses have the same safety characteristics as the
original parts. Use of replacements specified by the
unit manufacturer can prevent fire, electric shock,
or other hazards.
22 SAFETY CHECK
Upon completion of any service or repairs to this
unit, ask the service technician to perform safety
checks recommended by the manufacturer to
determine that the unit is in safe operating
condition.
23 WALL OR CEILING MOUNTING
The product should be mounted to a wall or
ceiling only as recommended by the manufacturer.
24 HEAT
The product should be situated away from heat
sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce
heat.
DV6T712D-AQ/I(GB) 02.11.12 5:39 PM ˘ ` 4 mac001 300DPI 120LPI

Product information
5
Advantages of This Product Are .....
• DVD, VCD, CD, CD-R(MP3), CD-RW, VHS
• DVD one-touch record function
• Watching DVD for recording broadcast
• Integrated remote control (VCR, DVD)
• VISS function
• Multiplex sound playback/record (SD-9100
only)
• High Sound Quality of 6 head Hi-Fi (SD-
9100 only)
• Simple record function
• MP3 file playback function (CD-R disc
having records of MP3 files)
• GUI (Graphical User Interface) through
OSD (On Screen Display)
By using the [DISPLAY] button on the remote
control, information on the DVD/VCD/CD
player and disc, can be displayed on the TV
screen.
• Screensaver function (DVD)
• 3D sound (3D sound effect using 2 speakers)
• High bit / High sampling with 27MHz /
10bit video encoder
• High bit / High sampling with 96MHz /
24bit Audio D/A Converter
• Coaxial, Optical digital Audio output (PCM,
Dolby Digital, dts)
You can enjoy high-level digital audio by
connecting with amp embedded with Dolby
Digital / dts decoder.
• Built-in Dolby Digital decoder (DVD)
• Analog audio 2-channels output for
DOWNMIX (x1)
• Composite video output (x1)
• Slow Forward / Reverse playback (DVD)
• Fast Forward / Reverse playback
• Search of title, chapter, and time in DVD
disc, and search of time and track time in
VCD and CD
• Various TV aspect (DVD)
4:3 for Pan and Scan, 4:3 for Letter Box, and 16:9
for Wide
• Repeat playback (title, chapter, and part for
DVD/ track, disc, and part for VCD/CD)
• Selective Play (DVD/VCD/CD)
You can select and play the desired title / chapter
of DVD and track of Video CD/CD in STOP
mode.
• 7 languages OSD (On Screen Display)
function (DVD)
You can select and display OSD in 7 languages.
(E / F /S/ G/ I / D / P)
• Parental Lock function (DVD)
This function can prevent playback of software
that may be unsuitable for children.
• Multi Audio function (DVD)
The audio soundtrack can be heard in up to 12
languages. In the case of SVCD or VCD, it
depends on the disc. (The number of audio
languages depends on the software.)
• Multi Subtitle function (DVD)
The subtitle can be seem in up to 12 languages.
In the case of SVCD or VCD, it depends on the
disc. (The number of audio languages depends
on the software.)
• Multi Angle function (DVD)
This function allows you to choose the viewing
angle of scenes which were shot from a number
of different angles. (The number of angles
depends on the software.)
• Screen zoom function (DVD/VCD)
DV6T712D-AQ/I(GB) 02.11.12 5:39 PM ˘ ` 5 mac001 300DPI 120LPI

6
Read Carefully before Using
Cautions in use of DVD-Video player are described below.
Please read carefully before using a DVD-Video player.
✔Installation place and handling
• When you place this player near other devices,
they may affect poorly together.
• When you place DVD-Video player and TV in
the upper and lower sides, it may cause flickering
of pictures or failure (tape is not ejected).
• When you place this player near strong
magnetic materials, it may affect image or voice
poorly or damage recording.
• Do not spill volatile liquids like insect spray over
the player. Do not leave rubber or plastic products
in contact with the player for a long time. They
will cause deterioration or paint peel-off.
✔Not in use
• When the unit is not in use, be sure to remove
the disc or tape and turn off the power.
• If you do not use the unit for a long period, remove
batteries in remote control to prevent leakage.
• In case you don’t use the unit for a long time,
the unit may not function properly in the
future. Turn on and use the player occasionally.
✔Moving
• Repack the unit as it was originally packed at
the factory. Alternatively, pack this product
with towel not to be damaged.
• Eject any videotape.
✔Cleaning
• Dust off dirt in cabinet or control panel part
smoothly with a soft cloth.
• For heavy dirt, soak the cloth in a weak
detergent solution, wring it well and wipe. Use
a dry cloth to wipe it out.
• Follow instructions in using chemical cleaners.
• Do not use any type of solvent such as gasoline
or benzene, as they may cause deterioration or
paint peel-off.
✔Checking
• Video is a high precision device. To obtain a
clear screen, we recommend regular inspection
and maintenance every 1,000 hours of use by
technical engineers.
• For checking, contact your dealer or your
nearest service center.
✔Checking and Replacement of Antenna
• Antenna is subject to change in its direction or
damage by wind and rain. For clean screen,
contact and consult your nearest service center
about checking and replacement.
✔In recording important screen
• Be sure to record the screen and check whether
recording is performed properly. We beg you
to understand compensation of recording if
recording is not performed by badness of used
tape or video.
✔Copyright
• Do not use your recordings without permission
of a copyrighter except personal usage.
✔Tape and Disc Handling
• Do not use any tape and disc below. Damage of
video head or cut/coiling of tape may cause
failure.
- Tape with mold
- Tape or disc stained with juice or attachments
- Tape having breakage connection
- Disassembled tape
- Disc with severe scratch
• Moisture condensation may occur in tape.
Moisture condensation damages the tape.
Please use the tape after the moisture
condensation is disappeared.
• After use, store tape vertically in a case to
prevent loose.
• Do not store the following places.
- High temperature and humidity
- Subject generation of mold
- Subject to direct sunlight
- Much dirt or dust
- Near strong magnetic materials such as speaker
✔Instructions in using REMOTE
• Operate remote control within 7m from the unit.
• Do not press 2(two) buttons at the same time.
• Do not light up sending and receiving part of
remote control.
• Do not keep in the place with much dust and
humidity.
STOPSELECT
QUICKCOPYSTANDBY/ON
-CHANNEL +EJECT
VIDEO AUDIO RLREC DVD
VHS
REW PLAY/PAUSE FF OPEN/CLOSE
REPEAT
OPEN/CLOSE
DISPLAY
TITLE/PBC
MENU
PR+
PR-
OUTPUT
PREV.
REC
PROGRAM
CLK/CNT
TV/VCR
SPEED
TRACKING
ANGLE/DIGEST
SEARCH
SYSTEM
PLAY/PAUSE NEXT
A-B
ZOOM
AUDIO
SUBTITLE
SETUP
CLEAR/3D
ENTER
OK
VCR
DVD
DV6T712D-AQ/I(GB) 02.11.12 5:39 PM ˘ ` 6 mac001 300DPI 120LPI

Product information
7
Identification of Controls
Main body (front panel)
STOPSELECT
QUICK COPYSTANBY/ON
- CHANNEL +EJECT
VIDEO AUDIO RL REC DVD
VHS
REW PLAY/PAUSE FF OPEN/CLOSE
!
%& * ) 1 2 3 4 56 7 8^
@#$
(
! POWER (STANDBY/ON) button
Use to power the device on/off if AC power supply
is connected.
@ Place to insert videotape
# COPY button
Use to copy contents of disc into a videotape.
$ Disc tray
% VIDEO INPUT jack
^ AUDIO INPUT jack
& EJECT button
* RECORD button
( CHANNEL Up/Down button
) Operation Display Window
Display operation of device. For more information,
see “Operation Display Window” as belows.
1 DVD operation display lamp
2 VCR operation display lamp
3 SELECT button
Use to change DVD mode to VCR mode, and vice
versa.
4 STOP button
Use to stop playing.
5 REWIND button
Use to rewind currently being played videotape or
disc; or to playback back rapidly.
6 Playback/PAUSE button
Playback videotape or disc.
Press this button to pause a screen.
7 FAST FORWARD button
Use to wind currently being played videotape or
disc; or to playback rapidly.
8 OPEN/CLOSE Tray button
Operation Display Window
Time, Counter and Current Operation
Tray is opened
Tray is closed
Disc is loaded
There is no disc in tray
Disc has some error
Menu screen is displayed
Setup menu is displayed
Power is ON
Power is OFF
3D Sound Indicator
DVD Disc Operation
VCR Operation
REC and TIMER REC display
Recording , TIMER Recording ,
To be Timer-recorded,
To be Timer-recorded state ERROR
(No Tape or Tape without tab)
Copying
Use to copy contents of disc into videotape.
dts Disc Indicator
Title This is displayed in VCD and CD disc.
Chapter This is displayed in DVD disc.
DV6T712D-AQ/I(GB) 02.11.12 5:39 PM ˘ ` 7 mac001 300DPI 120LPI

8
Main body (Rear Panel)
Identification of Controls
!^
#
@%*
&
$
! POWER CORD
It is a jack for supplying power to the unit.
Connect to outlet in a wall.
@ DIGITAL OUTPUT (COAXIAL, OPTICAL)
Jack
To enjoy sound quality of theater level in home,
connect this jack with amp or unit embedded
with digital audio decoder.
# AUDIO OUTPUT Jack
$ VIDEO OUTPUT Jack
% EURO AV1 Jack
^ EURO AV2/DECODER Jack
& Connection to ANTENNA Cable
* Connection to TV
Accessories
REPEAT
OPEN/CLOSE
DISPLAY
TITLE/PBC
MENU
PR+
PR-
OUTPUT
PREV.
REC
PROGRAM
CLK/CNT
TV/VCR
SPEED
TRACKING
ANGLE/DIGEST
SEARCH
SYSTEM
PLAY/PAUSENEXT
A-B
ZOOM
AUDIO
SUBTITLE
SETUP
CLEAR/3D
ENTER
OK
VCR
DVD
remote control 2 Batteries RF cable Owner’s Manual/
Warranty
• To purchase accessories or not supplied parts additionally, contact your nearest dealer or service center. But,
owner’s manual and warranty are not sold additionally.
DV6T712D-AQ/I(GB) 02.11.12 5:39 PM ˘ ` 8 mac001 300DPI 120LPI

Product information
9
Remote Control
REPEAT
OPEN/CLOSE
DISPLAY
TITLE/PBC
MENU
PR +
PR -
OUTPUT
PREV.
REC
PROGRAM
CLK/CNT
TV/VCR
SPEED
TRACKING
ANGLE/DIGEST
SEARCH
SYSTEM
PLAY/PAUSE NEXT
A-B
ZOOM
AUDIO
SUBTITLE
SETUP
CLEAR/3D
ENTER
OK
VCR
DVD
6
@
#
!
$
%
^
&
*
(
)
1
2
3
4
5
7
8
9
0
“
‘
+
=
Q
q
W
w
E
e
!
[DVD] MENU button
@ POWER button
#
[DVD] TITLE /PBC button
$
[DVD] OPEN/CLOSE button, [VCR] EJECT button
%
[DVD, VCR] MOVE/SELECT in OSD, [VCR] Channel
Up/Down button
^ SETUP button
&
[DVD] REPEAT Playback button
*
[DVD] REPEAT a defined period from A to B button
(
[DVD] PREVIOUS button (move into a previous
chapter or track)
) REVERSE SEARCH button
1
[VCR] PROGRAM button (SD-9100 only)
2
[DVD, VCR] CLOCK/COUNTER button
3
[DVD, VCR] TV/VCR button
4
[VCR] Record button
5
[DVD, VCR] NUMBER button , [VCR] TRACKING -/+
button
6 VCR SELECT button
7 DVD SELECT button
8
[DVD, VCR] OSD DISPLAY button
9 OUTPUT Selection button
0 ENTER/OK button
“ CLEAR/3D button
‘
[DVD] AUDIO LANGUAGE Select, [VCR] AUDIO
Select button (SD-9100 only)
+
[DVD] SUBTITLE Select button
=
[DVD] NEXT button (Move into a next chapter or
track) , [VCR] Frame Advance button in pause mode
Q PLAY/PAUSE button
q FORWARD SEARCH button
W STOP button
w
[DVD] Chapter/Title/Time SEARCH button
E
[DVD] ZOOM button
e
[DVD] ANGLE, [VCD] DIGEST, [VCR] Record SPEED
button
SYSTEM button (This button is not available for
this set)
Press the power [ ] button of the remote for about
8 seconds. No buttons of front panel and remote can
be operated now and Lock indicator (“ ”) will
be displayed on window display. To release child
lock, press the power [ ] button of the remote
control for about 8 seconds.
Child Lock!!!
DV6T712D-AQ/I(GB) 02.11.12 5:39 PM ˘ ` 9 mac001 300DPI 120LPI

10
Setting up your player
(Option 1) - Connecting your player through RF lead
With this connection, if your player is receiving CH ARD and your TV is displaying CH3, when you press the
[TV/VCR] button on the remote control, your TV will automatically display the CH ARD. “VCR” will be
displayed.
In this mode, to change the viewing channels the [PR-] and [PR+] buttons on the player remote need to be used.
To switch off this mode press [TV/VCR] on the remote control, TV remote can now be used as normal. You will
get better pictures and sound quality if you connect your player with a scart lead.
■Before you start, unplug all the equipment from the mains supply.
Television
Aerial
The type of aerial you
should use, depends on
local interference and how
far you are from the
transmitter. You should
contact a local retailer if you
have any questions about
your aerial.
Back view of your player
230V~,
50 Hz
(Option 2) - Connecting your player through a scart lead
Television
Aerial
Back view of your player
230V~,
50 Hz
Scart lead (not supplied)
DV6T712D-AQ/I(GB) 02.11.12 5:39 PM ˘ ` 10 mac001 300DPI 120LPI

Installation
11
Connecting your player through extra equipment
(satellite system)
(Option 1) - Connecting your player through RF lead
■Before you start, unplug all the equipment from the mains supply.
Television
Aerial
Back view of your player
230V~,
50 Hz
You can use this connection if your player has two scart sockets. This will improve sound and picture quality
when you are recording from satellite.
Satellite
DV6T712D-AQ/I(GB) 02.11.12 5:39 PM ˘ ` 11 mac001 300DPI 120LPI

12
Connecting your player to the Hi-Fi system
Option 1
■Before you start, unplug all the equipment from the mains supply.
Television
Plug a phono cable into the
“Audio L/R” sockets on the
back panel and into the audio
sockets on any audio
amplifier, if needed. If your
player does not have this
connection, see page 14.
Player
230V~,
50 Hz
You can also use a scart lead to improve picture and sound quality from your player.
Hi-Fi Aerial
Option 2
Television
Plug a scart to phono cable into
the “AV1” socket on the back
panel and into the audio socket
on any audio amplifier, if
needed.
Player
230V~,
50 Hz
Hi-Fi Aerial
DV6T712D-AQ/I(GB) 02.11.12 5:39 PM ˘ ` 12 mac001 300DPI 120LPI

Installation
13
How to connect
How to connect your player to another player
■Before you start, unplug all the equipment from the mains supply.
First player
Second player
230V~,
50 Hz
1) Insert the tape you wish to record on into the first player and press [OUTPUT] until “AV1” appears on the
front display.
2) Insert the tape you wish to copy from into the second player. Press the [PLAY] button on the second player.
3) Press the [RECORD] button on the first player.
The player will start recording.
If your player has two scart sockets, you can use the other socket “AV2” to connect other equipment.
To use this function, see page 15.
How to connect your player to a camcorder
How to connect
■Before you start, unplug all the equipment from the mains supply.
If you have connected your camcorder in this way, you can also connect a scart lead from “AV2” on the
back panel of the player to the television. To use this function, see page 15.
You can also connect the camcorder by using a phono cable if your player has front input sockets.
Check the front of your player for this connection, see page 15.
Camcorder
Aerial
230V~,
50 Hz
Television
Player
to
camcorder
Scart Plug
to TV
DV6T712D-AQ/I(GB) 02.11.12 5:39 PM ˘ ` 13 mac001 300DPI 120LPI

14
Connecting Dolby Digital Amp with Digital
Audio Out Jack
How to connect
(L) AUDIO IN (R)
1
1Select either COAXIAL or OPTICAL to connect to amp of Dolby Digital.
** If you want to know about “Dolby Digital”, please refer to [About DVD] in 43-44p.
AMPLIFIER OF DOLBY DIGITAL
REAR PANEL OF DVD-VIDEO
CONNECTING CABLE
(Not supplied)
Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic" and the double-D symbol are trademarks of Dolby Laboratories.
DV6T712D-AQ/I(GB) 02.11.12 5:39 PM ˘ ` 14 mac001 300DPI 120LPI

Installation
15
2nd scart socket
2nd scart socket
If your video has the AV2 output, shown in the diagram below, you can connect other equipment as seen on
pages 11-13.
2nd scart INPUT ONLY
INPUT+OUTPUT
When connecting other equipment please refer to their manuals for further information. This video manual
recommends the set up as shown on page 11. When connected by this method if the equipment is turned off the
video behaves as normal, but if the equipment is turned on the video will automatically switch over to AV2
mode and displays the channel of the other equipment, channel selection can only be performed by the other
equipment, the video PR+/PR- buttons have no effect.
To return to normal video use the other equipment must be turned off.
Recording from other Equipment.
Simple recording can be performed, ensure the equipment is turned on and is displaying the correct channel.
Timer recording, set the video to perform a timed recording ensuring AV1 is selected as the channel to be
recorded. Some equipment may have a timer which allows it to be powered on to the correct channel, if this
feature is not available the other equipment should be left powered on.
Front AV
If the video has front input sockets, it is possible to connect devices such as a
camcorder to the video. To watch a camcorder tape the video must be in
AVF mode. Recordings of this input are the same as described on pages 10-
13.
DV6T712D-AQ/I(GB) 02.11.12 5:39 PM ˘ ` 15 mac001 300DPI 120LPI

16
Initial Installation
Setting up the player
■Switch the TV on.
■You can also start "AUTO SET" in the SETUP "PR PRESET" "AUTO SET".
■To tune in new stations (manual tuning) and to enter station names see page 23-24.
LANGUAGE SET
ENGLISH
DEUTSCH
ITALIANO
ESPAÑOL
FRANÇAIS
NEDERLANDS
PR+/-:SELECT
OK:CONFIRM SETUP:END
COUNTRY SET
BN
DNL
DK S
ESF
GR SW
ITR
LUX OTHERS
PR+/-:SELECT
OK:CONFIRM SETUP:END
SETUP:END
PLEASE WAIT...
CH 25
RF OUTPUT SET
0-9:SELECT(21-69)
OK:CONFIRM SETUP:END
CURRENT CH 52
RECOMMENDED CH 54
You should see this picture the first time you switch on the TV
and player.
Choose your language.
1
Then choose your country.
For selecting the country, refer to the followings.
2
OK for "AUTO SET!".
"AUTO SET" tunes in all the stations you can receive in your
country and sorts them in an order common for your country.
Clock is automatically set.
3
If other stations are positioned on near the current RF OUTPUT
CH, the guide message appears automatically.
The player recommends the optimal RF OUTPUT CH number
automatically.
4
B: Belgium
D: Germany
DK: Denmark
E: Spain
GR: Greece
I: Italy
LUX: Luxembourg
N: Norway
NL: Netherlands
S: Sweden
SF: Finland
SW: Switzerland
TR: Turkey
Press the [OK] button to confirm the recommended PR.
Should you wish the stations to have the same numbers as those
used on the TV, follow the instructions in "Sorting programme
locations" on page 24.
Else ...
exit the basic installation function and enjoy your player.
5
PLEASE CHANGE THE TV
CH TO 54.
IMPORTANT!
MANUAL SET
PR01 ARD PR08 P-08
PR02 ZDF PR09 P-09
PR03 P-03 PR10 P-10
PR04 P-04 PR11 P-11
PR05 MTV PR12 ----
PR06 P-06 PR13 ----
PR07 P-07 PR14 ----
PR+/-:SELECT
OK:CONFIRM SETUP:END
• If you don´t see this picture, because you don´t use a SCART cable,
search this picture now (CH 52) with the station tuning functions of
your TV set (see its user manual).
• In case of interference problems on CH 52, type in an
other transmission channel between 21 and 69 using
the number buttons.
DV6T712D-AQ/I(GB) 02.11.12 5:39 PM ˘ ` 16 mac001 300DPI 120LPI

Basic Operation
17
■Press [VCR] button on the remote control to change into VCR Mode and follow the procedure
below.
Call the player’s "MAIN SETUP",
choose "VCR SETUP", then "CLOCK SET".
1
Move to the position you want to change and type in the
new values.
Wait a few seconds after typing a one-digit number.
2
Store with [OK] button and exit with [SETUP] button.
CLOCK SET
0-9:SETUP (HOUR)
</>:CORRECT SETUP:END
TIME - - : - -
DATE - - / - - /- - - -
CLOCK SET
0-9:SETUP (HOUR)
</>:CORRECT
OK:CONFIRM SETUP:END
TIME 06:05
DATE 10/03/2002(SUN)
Setting time and date
Setting time and date / Auto clock
■Auto Clock is only available for models with the VPS/PDC function (see page 25).
Some broadcasting stations may send the time and date along with the VPS/PDC data. The video will
automatically use this time and date during the initial setting up procedure during normal use, and every time
you switch the video off at the mains. If you find that this time and date is incorrect you can remove this feature
by following the steps below changing it to OFF mode, you will then have to manually set the time and date, see
above.
AUTO CLOCK
ON
OFF
PR+/-:SELECT
OK:CONFIRM SETUP:END
Setting Auto clock
VCR SETUP
CLOCK SET
LANGUAGE SET
RF OUTPUT SET
16:9 SET
OSD ON/OFF
AUTO CLOCK
PR+/-:SELECT
OK:CONFIRM SETUP:END
DV6T712D-AQ/I(GB) 02.11.12 5:39 PM ˘ ` 17 mac001 300DPI 120LPI

18
OSD ON & OFF
Output Select
Press [DVD] button.
If DVD mode is correctly selected, DVD on the operation display
window is lit. Then, REMOTE button works as DVD function. Press the
[DVD] button, then the mode of DVD-Video Player becomes to the
OPERATION mode.
To Select VCR
Press [VCR] button.
If VCR mode is correctly selected, VCR on the operation display window
is lit and DVD goes out. Then, REMOTE button works as VCR function.
Press the [VCR] button, then it becomes to the VCR OPERATION mode.
To Select Watch Modes or External Input
Press [OUTPUT] button.
Whenever you press [OUTPUT] button, DVD, VCR PLAYBACK, BROADCASTING RECEPTION and
EXTERNAL INPUT is selected in order and the DISPLAY of DVD and VCR will be changed accordingly.
To Select DVD
Call the player’s "MAIN SETUP".
Choose “VCR SETUP”.
And press the [OK] button.
1
Choose “VCR SETUP”.
And press the [OK] button.
2
Select “OSD ON/OFF”.
If you want OSD OFF mode, select it and press [OK] button to
confirm.
Then OSD characters are not displayed in the normal picture.
3
OSD (On Screen Display) ON & OFF
This player is set to “OSD (On Screen Display) ON” mode before shipping and you can change it
to OFF mode.
VCR SETUP
CLOCK SET
LANGUAGE SET
RF OUTPUT SET
16:9 SET
OSD ON/OFF
AUTO CLOCK
PR+/-:SELECT
OK:CONFIRM SETUP:END
OSD ON/OFF
ON
OFF
PR+/-:SELECT
OK:CONFIRM SETUP:END
SETUP
TIMER PROGRAM
PR PRESET
VCR SETUP
TAPE CONTROL
PR+/-:SELECT
OK:CONFIRM SETUP:END
DV6T712D-AQ/I(GB) 02.11.12 5:39 PM ˘ ` 18 mac001 300DPI 120LPI

Basic Operation
19
DVD Playback
Press [ ] button to power on.
Press [DVD] button of REMOTE to change into DVD mode.
Press [OPEN/CLOSE] button to open the disc tray.
Place a disc firmly on the disc tray, making its label look upward.
Insert the disc and press [OPEN/CLOSE] button to close the tray.
The disc tray is closed and after checking the disc’s condition, Playback or Stop
function starts to operate.
1
2
3
To playback it, press [PLAY/PAUSE] button.
• In the case of DVD,
DVD menus and titles are displayed on TV screen.
• In the case of S-VCD and VCD2.0
the menus are displayed on TV screen and it is converted into PBC(Playback
Back Control) mode.
• In the case of CD, VCD1.1 and MP3,
the disc plays in order of its track numbers.
4
To stop it, press [ ] button.
For pause, press [PLAY/PAUSE] button in playback mode.
If you press this button once more, it starts playback again.
5
Press [OPEN/CLOSE] button to remove the disc.
6
REPEAT
OPEN/CLOSE
DISPLAY
TITLE/PBC
MENU
PR +
PR -
OUTPUT
PREV.
REC
PROGRAM
CLK/CNT
TV/VCR
SPEED
TRACKING
ANGLE/DIGEST
SEARCH
SYSTEM
PLAY/PAUSE NEXT
A-B
ZOOM
AUDIO
SUBTITLE
SETUP
CLEAR/3D
ENTER
OK
VCR
DVD
Various Playback Methods
■If you want fast forward (or reverse) playback, press [ ] or [ ]button in
Playback mode. You can watch fast playing (reverse ) screen.
* This reverse playback can be unavailable for certain DVD. Unavailable for MP3.
■If you want slow (or reverse) playback, press [ ] or [ ] button in Pause
mode. You can watch the desired screen in the slow forward (reverse) playback.
* For the case of Video CD, this reverse slow playback function is unavailable. The
mark will appear.
■If you want still picture, press [PAUSE] button in Playback mode. You can watch
the desired screen in Pause status.
DV6T712D-AQ/I(GB) 02.11.12 5:39 PM ˘ ` 19 mac001 300DPI 120LPI