Dahle 828 HD User manual

Operating
Instructions
Dahle 828HD
828 HD
PAPER & HARD DRIVE SHREDDER
®

2
TABLE OF CONTENTS
SPECIFICATIONS
CONTENTS PAGE
Safety Precautions................................................................................................................................3-4
Installation ..................................................................................................................................................4
Operation................................................................................................................................................5-6
Maintenance ..............................................................................................................................................7
Warranty ......................................................................................................................................................7
Troubleshooting .......................................................................................................................................8
READ CAREFULLY BEFORE USING
Proper care of your new shredder will ensure many years of trouble free operation,
with minimum of maintenance or repair.
IMPORTANT:
Please note that all packaging should be retained by the customer for (30) days from
the time of receipt. In the event that this unit needs to be sent back for replacement
or repair this packaging will be required to do so. Should the packaging have been
discarded before the (30) day requested period, packaging costs may be incurred by
the customer.
PAPER HARD DRIVE
Security Level: P3 H4
Shred Size: 40mm X 40mm  90mm 5mm X 30mm  75mm
Feed Width: 12” 4.75”
Shred Capacity: 80100 sheets
Bin Capacity: 31 gal. 26 lbs.
Warranty: 1 year
Dimensions: 3311⁄22” X 37 11⁄22” X 46”
Weight: 1,254 LBS.
Power Supply: 220v 3 phase, 20 amp
NEMA L1520PPlug, L1520RReceptacle
Results may vary depending on power source, paper type, and proper maintenance.
Warranty includes labor but excludes wearable parts.
828 HD
PAPER & HARD DRIVE SHREDDER
®

3
Your new shredder features powerful cutting mechanisms that may cause serious
injury. Please follow all safety precautions.
• Only store, transport, and operate the shredder in an upright position!
• All liquids and gases used on the shredder must comply with Dahle guidelines!
• The shredder must only be operated in enclosed spaces at temperatures of 15 °C to
32 °C(59 °F–90 °F) and non-condensed humidity of 15% to 95%!
• Do not place the shredder near a heat source!
• Ensure the shredder is rmly on the oor at a distance of 4” from the wall; activate
caster locks!
• Avoid any accumulation of heat!
• The mains socket must be grounded and easily accessible at all times!
• Use only the power cord supplied with the device by Dahle and ensure that it is not
damaged!
• Ensure that the building installation has short-circuit protection: max. 16 A (US
max. 20 A)!
• Do not use near ammable liquids and gases!
• Do not use near caustic substances!
• Do not subject to moisture!
• Do not open up the machine!
• Automatic start-up!
• Switch o the shredder at the main switch when not in use!
• Only use the shredder provided that it is in perfect working order, while observing
the operating instructions and the usual regulations, guidelines and applicable
safety and accident prevention requirements. Take the shredder out of service
immediately if faults occur!
• The device is not intended for use by persons (including children) with restricted
physical, sensory or mental capabilities or a lack of experience and knowledge, un-
less they are working under supervision or receive detailed instruction about how
to use the device from a person who is responsible for safety.
IMPORTANT SAFETY PRECAUTIONS
This device complies with part  of the FCC Rules. Operation is subject to the following conditions:
() This device may not cause harmful interference, and
() This device must accept any interference received, including interference that may cause undesired operation.
16100-13100 | 1121

4
IMPORTANT SAFETY PRECAUTIONS
• Insert supplied waste containers into the
shredder.
• Plug shredder directly into a NEMA L15-20R
receptacle.
INSTALLATION
1. It is obligatory to follow the safety instructions!
2. Read the operating instructions carefully before using the shredder!
3. This shredder is not intended to be used by children (the product is not a toy)!
4. Do not touch the feed opening with your hands!
5. Do not allow items of clothing to touch the feed opening!
6. Do not allow your hair to touch the feed opening!
7. Prior to maintenance work, disconnect the shredder from the power supply!

5
OPERATION
POWER ON
• Open breaker panel door and turn ON the switch/breaker located on the left side of
the cabinet and close the breaker panel door.
• Insert Key and turn to the ON position.
FOR HARD DRIVE DESTRUCTION 2.5”and 3.5”
• Slide open the Hard Drive feed door and input one hard drive.
• Slide shut the feed door.
• Press START twice on the control panel. DO NOT open the feed door during the
shredding process.
• Press STOP after the hard drive has been shredded and the chamber is empty.
• The LED counter can be reset by pressing the RESET button.
FOR PAPER DESTRUCTION
• Pressing the START button on the control panel will put the machine in AUTO mode.
• AUTO mode: insert paper into the feed opening and the shredder will automatically
start the shredding process. Once paper passes through the shredder, the machine
will stop automatically.
• MANUAL mode: with the START button illuminated, press the START button again
to put the machine in MANUAL mode for continuous shredding. Press the START
button again to turn o Manual mode.

6
REVERSE MODE
• In the event of a jam, press the REV (reverse) button. Reduce the capacity of materi-
al to be shredded and re-insert into the shredder.
CLEANING
• From the STOP mode, push and hold the reverse (REV) button for ve seconds. The
machine will cycle through a one-minute cleaning mode and then automatically
STOP. It is recommended to activate CLEANING mode monthly, or every time the
waste containers are emptied.
DOOR OPEN
• The DOOR OPEN will illuminate if the safety shield feed opening door located on
the top of the machine or the cabinet door is open. Both must be closed for the
machine to operate.
FULL
• The FULL LED will illuminate if one or both of the waste containers are full. Open
the cabinet door, empty the waste container, replace the waste container, close the
cabinet door, and press the START button to resume shredding.
EMERGENCY STOP
• Press the EMERGENCY STOP button to immediately turn OFF the
shredder. To resume operation, turn the red knob clockwise until
it releases.
OPERATION

7
MAINTENANCE
• After emptying waste container, it is recommended to run a CLEANING cycle
by pressing and holding the REV button for ve seconds. The machine will cycle
through a one-minute cleaning mode and then automatically STOP.
• Switch o the shredder and disconnect power by removing power cord from wall
outlet.
• Clean the exterior of the machine with a soft cloth. Do not use harsh detergents or
chemicals.
WARRANTY
Dahle guarantees it’s industrial shredders to be free from manufacturing defects (ma-
terials / workmanship) for a period of one year. Dahle oers a one year guarantee on
the cutting cylinders.
This warranty shall not apply to wearable items or defects caused by ordinary wear
and tear, insucient maintenance or improper operation. This warranty applies to the
original purchaser only and is not transferable. There are no other warranties ex-
pressed or implied beyond the face of this agreement.

8
TROUBLESHOOTING