Dahua VTO2111D-WP User manual

Digital Villa VTO (VTO2 series) User’s Manual
V1.0.1

Table of Contents
1Product Overview ........................................................................................1
1.1 Intro to Product ...............................................................................................1
1.2 Applicable Models...........................................................................................1
2Structure......................................................................................................2
2.1 Front Panel .....................................................................................................2
2.2 Rear Panel......................................................................................................3
3Networking Scene........................................................................................ 4
4Installation and Debug.................................................................................5
4.1 Device Wiring.................................................................................................. 5
4.2 Device Installation........................................................................................... 5
4.2.1 Screw.................................................................................................... 6
4.2.2 Installation Step .................................................................................... 6
4.3 Debug Device .................................................................................................7
4.3.1 Before Debugging................................................................................. 7
4.3.2 Debug Device .......................................................................................8
4.3.3 Successfully Debug............................................................................. 11
5Web Config..................................................................................................1
5.1 WEB Login and Logout ................................................................................... 1
5.1.1 Login..................................................................................................... 1
5.1.2 Logout...................................................................................................1
5.2 System Config.................................................................................................2
5.2.1 Local Config..........................................................................................2
5.2.2 LAN Config ........................................................................................... 7
5.2.3 Indoor Manager..................................................................................... 8
5.2.4 Network Config ................................................................................... 10
5.2.5 Video Set............................................................................................ 12
5.2.6 User Manager..................................................................................... 14

5.2.7 IPC...................................................................................................... 16
5.2.8 WIFI Info............................................................................................. 17
5.3 Info Search.................................................................................................... 17
5.3.1 Call History ......................................................................................... 18
5.3.2 Alarm Record...................................................................................... 18
5.3.3 Unlock Record .................................................................................... 18
5.4 Status Statistics ............................................................................................ 19
6Basic Function Introduction........................................................................ 20
6.1 Monitor.......................................................................................................... 20
6.2 Call Function................................................................................................. 20
6.3 Unlock........................................................................................................... 20
6.4 Restore Backup ............................................................................................ 20
Appendix 1 Technical Specifications....................................................................... 21

Important Safeguards and Warnings
Please read the following safeguards and warnings carefully before using the product in
order to avoid damages and losses.
Note:
Do not expose the device to lampblack, steam or dust. Otherwise it may cause
fire or electric shock.
Do not install the device at position exposed to sunlight or in high temperature.
Temperature rise in device may cause fire.
Do not expose the device to humid environment. Otherwise it may cause fire.
The device must be installed on solid and flat surface in order to guarantee
safety under load and earthquake. Otherwise, it may cause device to fall off or
turnover.
Do not place the device on carpet or quilt.
Do not block air vent of the device or ventilation around the device. Otherwise,
temperature in device will rise and may cause fire.
Do not place any object on the device.
Do not disassemble the device without professional instruction.
Warning:
Please use battery properly to avoid fire, explosion and other dangers.
Please replace used battery with battery of the same type.
Do not use power line other than the one specified. Please use it properly.
Otherwise, it may cause fire or electric shock.
Privacy Protection Notice
As the device user or data controller, you might collect personal data of others' such as
face, fingerprints, car plate number, Email address, phone number, GPS and so on. You
need to be in compliance with the local privacy protection laws and regulations to
protect the legitimate rights and interests of other people by implementing measures
include but not limited to: providing clear and visible identification to inform data
subject the existence of surveillance area and providing related contact.
About the Manual
The Manual is for reference only. If there is inconsistency between the
Manual and the actual product, the actual product shall prevail.
We are not liable for any loss caused by the operations that do not comply
with the Manual.
The Manual would be updated according to the latest laws and regulations

of related regions. For detailed information, see the paper User's Manual,
CD-ROM, QR code or our official website. If there is inconsistency between
paper User's Manual and the electronic version, the electronic version shall
prevail.
All the designs and software are subject to change without prior written
notice. The product updates might cause some differences between the
actual product and the Manual. Please contact the customer service for the
latest program and supplementary documentation.
There still might be deviation in technical data, functions and operations
description, or errors in print. If there is any doubt or dispute, please refer to
our final explanation.
Upgrade the reader software or try other mainstream reader software if the
Guide (in PDF format) cannot be opened.
All trademarks, registered trademarks and the company names in the
Manual are the properties of their respective owners.
Please visit our website, contact the supplier or customer service if there is
any problem occurred when using the device.
If there is any uncertainty or controversy, please refer to our final
explanation.

1
1 Product Overview
1.1 Intro to Product
Digital villa VTO has easy operation, simple installation and support:
WIFI
Mobile phone live preview
Call VTH, and perform video talk
Door unlock by card
One-click MGT center
Vandal-proof alarm and etc.
1.2 Applicable Models
Model Color
Unlock via
IC card
Button Type
Lock Control
Module
POE WIFI
VTO2111D-WP Black Support Mechanical
keypad
Support built-in
and external
Support Support
VTO2111D-W Black Support Mechanical
keypad Support built-in and external Not support Support
VTO2111D Black Support Mechanical
keypad Support built-in and external Not support Not support

2
2 Structure
2.1 Front Panel
Device front panel is in Figure 2-1. Description of each component is in Chart 2-1.
Figure 2-1
No. Port Name Note
1 MIC Audio input.
2 Camera It monitors corresponding door region.
3 Card Area Authorize IC card to unlock （card issuing）,
swipe card to unlock.
4 Indicator In standby status, blue light is NO.
Network offline, blu
e light flashes when
call VTH or MGT center.
5 Call
Button Call MGT center or VTH.
6 Speaker Audio output.
Chart 2-1

3
2.2 Rear Panel
Device rear panel is in Figure 2-2. Description of each component is in Chart 2-2.
Figure 2-2
Chart 2-2
No.
Component Name
Note
1 Bracket Position Bracket used to fix device and wall.
2 Vandal-proof
Switch
When villa VTO is forced to leave wall, it will alarm and
send alarm to MGT center.
3 Alarm Input/output
Interface
1-ch alarm input.
4 RESET Key
Shortly press this key to config reset WIFI.
Long press this key for 10s
, system will restore
default settings.
5 RJ45 Interface Standard Ethernet cable, support POE power.
6
Power Input
Interface DC 12V input, support 9V-26V
wide voltage, with
anti-reverse connection.

4
3 Networking Scene
Villa VTO networking scene is in Figure 3-1.
Figure 3-1

5
4 Installation and Debug
4.1 Device Wiring
Device wiring is in Figure 4-1.
Figure 4-1
4.2 Device Installation
Warning:
Avoid installation in poor environment, such as condensation, high temperature, oil
stain, dust, corrosion or direct sunlight.
Project installation and debugging must be done by professionals. Please do not
open the device in case of failure, and please contact after sales service.

6
4.2.1 Screw
For installation, please use screw according to Chart 4-1.
Component Name
Illustration
Quantity
M4×30 cross pan head
machine screw 2
Chart 4-1
4.2.2Installation Step
VTH installation is in Figure 4-2.
Figure 4-2
Steps:
Step 1. According to position of bracket, dig hole on installation surface (such as wall).
Step 2. Insert expansion bolt in hole you just dug.
Step 3. Fix bracket on designated position with screw.
Step 4. Fix device on bracket with screw.
Step 5. Install tail sealing element at device tail. Use two M4×30 screw pan head
machine screw to fix bracket on 86 box.

7
Note:
The recommended distance from device center to ground is 1.4m~1.6m.
4.3 Debug Device
4.3.1Before Debugging
Warning:
Debugging personnel shall be familiar with related materials, know device installation,
wiring and usage.
Debugging personnel check whether circuit has short circuit or open circuit or not.
Make sure circuit is normal, plug device to power.
After debugging end, clear up site (handle plugs, fix device and etc.)
Villa VTO default IP address is 192.168.1.110. Before you use the VTO, you must modify
its IP to be in the same network segment with the VTH.
Step to debug:
Step 1. Connect device to power, and power up.
Step 2. In PC browser, enter device default IP address 192.168.1.110. See Figure 4-3.
Figure 4-3
Step 3. Enter username and password.
Note:
Default username is “admin”. Default password is “admin”. Please refer to Ch 5.2.4.1
for setup.

8
After modification is finished, WEB page will restart and go to new IP address.
4.3.2Debug Device
Make VTH5221D an example here:
Step 1. Plug device to power.
Step 2. In homepage, long press Settings for 6 seconds. Device pops up Password
Verification box.
Step 3. Enter project setup password which is 002236 by default.
Step 4. Press Net Set to connect VTH.
Wireless:
If the VTH supports WI-FI, you can select wireless connection.
1.Select Wireless, open WLAN, view available WI-FI. See Figure 4-4.
Figure 4-4
2.Select WI-FI you want to connect, and in pop-up WLAN connection window,
enter WI-FI password.
3.Press OK.
Now device interface shows at the upper-right corner which means wireless
connection is successful.
Wired:
1.Select Wired. See Figure 4-5.

9
Figure 4-5
2.Enter VTH Local IP, Subnet Mask and Gateway.
3.Press OK.
Now device interface shows at the upper right corner which means wired connection
is successful.
Note:
You also can enable DHCP to auto gain VTH IP, subnet mask and gateway and press
OK to complete wired connection.
Step 5. Press Production to config VTH room no.
Warning:
VTH room no. must match VTH short no. on WEB of corresponding VTO. Please
refer to Ch 5.2.3.
If you want to set this VTH to be master VTH, then you shall select Master.
Fill in room no., press OK to save, see Figure 4-6.

10
Figure 4-6
If you want to set this VTH to be extension VTH, then you shall select Extension.
Fill in user config info for extension to auto sync with master, such as room no.
and master IP. See Figure 4-7.
Figure 4-7
4.Press OK to save config.
System pops up prompt interface which means config is successful.
Note:

11
Telnet server is ON, debugging personnel can view VTH config via
telnet+IP.
Step 6. Press Network to config VTO info.
Warning:
Before config, please make sure VTO is plugged to power and is in the same segment
with VTH.
1. Fill in VTO name, master VTO IP address, set enable status to , see Figure
4-8.
Figure 4-8
2. Fill in VTO name, and extension VTO IP address, select device type, set enable
status to .
The device supports n19 units of extensions, and you can press to page down
to add more extensions.
4.3.3Successfully Debug
On VTO dial VTO room no. to call VTH. VTH pops up monitoring video and operation
buttons, see Figure 4-9.

12
Figure 4-9
Icon Icon Name Note
Unlock 1
VTO config electric control lock, press
, unlock.
Unlock 2
If this VTO has 485 expansion interface, it
can expand electric control lock or door
sensor lock, after successfully matching
with VTH, press , unlock.
MIC Press , turn off MIC volume.
IP Camera Press ，
select IPC video of
monitoring favorites.
Snapshot
Press ，to snapshot.
Note:
When SD card is not installed, this button is
grey.
Record
Press ，record；
call ends, press
end recording.
Records are stored to SD card of this VTH,

13
Icon Icon Name Note
if full, it overwrites from the earliest record.
Note:
When SD card is not installed, this button is
grey.
、Volume Adjust call volume.
Accept Call -
Hang up -

1
5 Web Config
This chapter introduces VTO WEB interface and its parameters, and how to configure
them.
5.1 WEB Login and Logout
5.1.1 Login
Step 1. In PC browser, enter device default IP address 192.168.1.110. See Figure 5-1.
Note:
Default username is “admin”. Default password is “admin”. Please refer to Ch
5.2.4.1 for setup.
Figure 5-1
Step 2. Enter username and password.
Note:
Default username is “admin. Default password is “admin”. After first time login,
please change password for security reasons. Please refer to Ch 5.2.6.3.
Step 3. Click Login.
5.1.2 Logout
Step 1. Select Logout>Logout>Logout. See Figure 5-2.

2
Figure 5-2
Step 2. Click Logout.
System exits WEB interface, return to login interface. You can go to Logout>Reboot
Device>Reboot Device interface, click Reboot Device to restart.
5.2 System Config
5.2.1 Local Config
In Local Config interface, you can view VTO model, version info and etc.
5.2.1.1 Local Config
In System Config>Local Config>Local Config interface, you can set light seneor, storage
point, reboot date and etc. See Figure 5-3 and Chart 5-1.
Figure 5-3
Parameter Note
Sensor Set compensation light threshold.
Storage Point Storage path of record and picture, you can select FTP or SD card.