Dahua KTP03 User manual

Digital VTH
User’s Manual
V1.0
.1

I
Foreword
General
This document mainly introduces function, structure, networking, installation process, debugging, UI
operation and technical parameter of digital VTH products.
Device Update
Do not cut off the power supply during upgrade. Power can be cut off only after the device
completes upgrade and reboots.
Safety Instructions
The following categorized signal words with defined meaning might appear in the Manual.
Signal Words Meaning
DANGER
Indicates a high potential hazard which, if not avoided, will result in
death or serious injury.
WARNING
Indicates a medium or low potential hazard which, if not avoided,
could result in slight or moderate injury.
CAUTION
Indicates a potential risk which, if not avoided, could result in property
damage, data loss, lower performance, or unpredictable result.
TIPS Provides methods to help you solve a problem or save you time.
NOTE
Provides additional information as the emphasis and supplement to
the text.
Revision History
Version Revision Content Release Time
V1.0.1 Revised “Important Safeguards and Warnings”. December 2022
V1.0.0 First release. November 2020
About the Manual
The Manual is for reference only. If there is inconsistency between the Manual and the actual
product, the actual product shall prevail.
We are not liable for any loss caused by the operations that do not comply with the Manual.
The Manual would be updated according to the latest laws and regulations of related regions. For
detailed information, see the paper User's Manual, CD-ROM, QR code or our official website. If

II
there is inconsistency between paper User's Manual and the electronic version, the electronic
version shall prevail.
All the designs and software are subject to change without prior written notice. The product
updates might cause some differences between the actual product and the Manual. Please
contact the customer service for the latest program and supplementary documentation.
There still might be deviation in technical data, functions and operations description, or errors in
print. If there is any doubt or dispute, please refer to our final explanation.
Upgrade the reader software or try other mainstream reader software if the Guide (in PDF format)
cannot be opened.
All trademarks, registered trademarks and the company names in the Manual are the properties
of their respective owners.
Please visit our website, contact the supplier or customer service if there is any problem occurred
when using the device.
If there is any uncertainty or controversy, please refer to our final explanation.

III
Important Safeguards and Warnings
This section introduces content covering the proper handling of the device, hazard prevention, and
prevention of property damage. Read carefully before using the device, and comply with the
guidelines when using it.
Operation Requirements
●Check whether the power supply is correct before use.
●Do not unplug the power cord on the side of the device while the adapter is powered on.
●Operate the device within the rated range of power input and output.
●Transport, use and store the device under allowed humidity and temperature conditions.
●If the device is powered off for longer than a month, it should be placed in its original package and
sealed. Make sure to keep it away from moisture, and store it under allowed humidity and
temperature conditions.
●Do not drop or splash liquid onto the device, and make sure that there is no object filled with liquid
on the device to prevent liquid from flowing into it.
●Do not disassemble the device without professional instruction.
Installation Requirements
●Do not connect the power adapter to the device while the adapter is powered on.
●Strictly comply with the local electric safety code and standards. Make sure the ambient voltage is
stable and meets the power supply requirements of the device.
●Do not connect the device to two or more kinds of power supplies, to avoid damage to the device.
●Improper use of the battery might result in a fire or explosion.
●Personnel working at heights must take all necessary measures to ensure personal safety including
wearing a helmet and safety belts.
●Do not place the device in a place exposed to sunlight or near heat sources.
●Keep the device away from dampness, dust, and soot.
●Install the device on a stable surface to prevent it from falling.
●Install the device in a well-ventilated place, and do not block its ventilation.
●Use an adapter or cabinet power supply provided by the manufacturer.
●Use the power cords that are recommended for the region and conform to the rated power
specifications.
●The power supply must conform to the requirements of ES1 in IEC 62368-1 standard and be no
higher than PS2. Please note that the power supply requirements are subject to the device label.
●The device is a class I electrical appliance. Make sure that the power supply of the device is
connected to a power socket with protective earthing.

IV
Table of Contents
Foreword............................................................................................................................................................ I
Important Safeguards and Warnings............................................................................................................. III
1 Product Overview.......................................................................................................................................... 1
Introduction................................................................................................................................................................................. 1
Function......................................................................................................................................................................................... 1
2 Network Diagram .......................................................................................................................................... 3
2-wire System .............................................................................................................................................................................. 3
Digital System.............................................................................................................................................................................. 3
3 Preparation and Commissioning.................................................................................................................. 6
Preparation................................................................................................................................................................................... 6
3.1.1 VTO Settings ................................................................................................................................................................... 6
3.1.2 VTH Settings .................................................................................................................................................................13
Commissioning.........................................................................................................................................................................25
3.2.1 VTO Calling VTH ..........................................................................................................................................................25
3.2.2 VTH Monitoring VTO..................................................................................................................................................25
4 Interface Operation..................................................................................................................................... 27
Main Interface ...........................................................................................................................................................................27
Call .................................................................................................................................................................................................28
4.2.1 Recent Call.....................................................................................................................................................................28
4.2.2 Contact ...........................................................................................................................................................................29
4.2.3 Call User..........................................................................................................................................................................30
4.2.4 Call from User...............................................................................................................................................................32
4.2.5 Call from VTO................................................................................................................................................................33
Info.................................................................................................................................................................................................34
4.3.1 Security Alarm..............................................................................................................................................................34
4.3.2 Guest Message.............................................................................................................................................................35
4.3.3 Publish Info....................................................................................................................................................................35
4.3.4 Video Pictures ..............................................................................................................................................................36
Monitor ........................................................................................................................................................................................36
4.4.1 Monitoring VTO ...........................................................................................................................................................37
4.4.2 Monitoring IPC.............................................................................................................................................................39
4.4.3 Favorite ...........................................................................................................................................................................41
SOS ................................................................................................................................................................................................42
Setting..........................................................................................................................................................................................42
4.6.1 Ring Settings.................................................................................................................................................................42
4.6.2 Card Information.........................................................................................................................................................45
4.6.3 Alarm Setting................................................................................................................................................................46
4.6.4 Mode Setting................................................................................................................................................................49
4.6.5 Forward Setting...........................................................................................................................................................50
4.6.6 General Setting............................................................................................................................................................51
4.6.7 Product Info ..................................................................................................................................................................57
Project Settings.........................................................................................................................................................................58
4.7.1 Forget Password..........................................................................................................................................................58

V
4.7.2 Network Settings ........................................................................................................................................................59
4.7.3 VTH Configuration......................................................................................................................................................59
4.7.4 VTO Configuration......................................................................................................................................................59
4.7.5 Default ............................................................................................................................................................................60
4.7.6 Reset MSG......................................................................................................................................................................60
Unlock Function .......................................................................................................................................................................60
Arm and Disarm Function.....................................................................................................................................................61
4.9.1 Arm...................................................................................................................................................................................61
4.9.2 Disarm.............................................................................................................................................................................62
5 DSS Agile VDP .............................................................................................................................................. 63
Downloading the App............................................................................................................................................................63
Registration and Login...........................................................................................................................................................64
Call Functions ............................................................................................................................................................................65
5.3.1 Forwarding Calls..........................................................................................................................................................66
5.3.2 Calling Operations......................................................................................................................................................68
Monitoring..................................................................................................................................................................................68
Call Records................................................................................................................................................................................70
Message.......................................................................................................................................................................................72
Visitor............................................................................................................................................................................................75
5.7.1 Creating Pass ................................................................................................................................................................75
5.7.2 Visit Records..................................................................................................................................................................77
Setting..........................................................................................................................................................................................78
Cybersecurity Recommendations ............................................................................................. 80

1
1Product Overview
Introduction
A digital VTH is device that can perform monitoring, voice/video call, and door unlock.
Function
Wi-Fi Networking
Connect to Wi-Fi networks.
Video/Voice Call
Make video or voice call to other VTOs and VTHs.
Monitoring
Monitor fence station, VTO and IPC devices (only supported by certain models).
SOS
Make emergency call to the Call Center.
Auto Snapshot
Take snapshots when calling or monitoring, and store them in the SD card.
DND (Do Not Disturb)
Mute all message and call notifications.
Remote Unlock
Unlock doors remotely.
Arm and Disarm
Arm and disarm 6 alarm devices.

2
Playback
Play back videos and pictures in the SD card.
Alarm
Alarms will trigger linkage and be sent to the Call Center.
Record
View call and alarm records.
Message
View messages, including videos, pictures and announcements.

3
2Network Diagram
2-wire System
Network diagram of 2-wire system
Digital System
There are two types of digital system network:
The VTH powered through PoE from the floor switch.

4
Network diagram of digital system (1)
The VTH is independently powered through a power supply.

5
Network diagram of digital system (2)

6
3Preparation and Commissioning
Carry out commissioning to ensure that the device can realize basic network access, call and
monitoring functions.
Preparation
Before commissioning:
Power on the device only after there is no short or open circuit.
Plan IP addresses and numbers (works as phone numbers) for every VTO and VTH.
Confirm the position of the SIP server.
The device must be used with a VTO that is the SIP server. This section takes a unit VTO as an
example. See corresponding user’s manuals for other VTO types.
Log in to the web interface of every VTO and VTH and configure all relevant information.
3.1.1 VTO Settings
3.1.1.1 Initialization
For first-time use, you must initialize the device.
Make sure that the IP addresses of the PC and VTO are in the same network segment. The default IP
address of VTO is 192.168.1.108.
Power on the VTO.
Go to the default IP address of VTO in the browser.
Device initialization
Enter the password and confirm it, and then click Next.

7
This password is used to log in to the web interface. It must be at least 8 characters, and
include a combination of at least two types among number, letter and symbol.
Set an email address
Select Email and enter your email address for resetting password.
Click Next.
Initialization successful
Click OK and the it jumps to the login interface.

8
Login interface
Enter username (admin by default) and password, and then click Login.
3.1.1.2 Network Parameters
Change the IP address of the VTO to the one that you planned.
Select Network Setting > Basic.
TCP/IP
Enter the parameters, and then click OK.
The VTO automatically restarts. Make sure that the PC is in the same network segment as the
VTO to log in again.
3.1.1.3 System Type
Select Local Setting > Basic.

9
Device properties
Select System Type to TCP/IP.
Click OK.
Wait for the device to automatically restart or restart it manually, and then the settings will
take effect.
3.1.1.4 Server Type
You can select the type of the server that manages all VTO devices.
Select Network Setting > SIP Server.
SIP server (1)
Select a server type.
When this VTO or another VTO works as the SIP server, select Server Type to VTO. It
applies to a scenario where there is only one building.
When a platform (such as Express/DSS) works as the SIP server, select Server Type to
Express/DSS. It applies to a scenario where there are multiple buildings.
3.1.1.5 SIP Server
Select Network Setting > SIP Server.

10
SIP server (2)
Configure SIP server.
The current VTO works as the SIP server.
Enable SIP Server, and then click OK. The VTO automatically restarts, and it jumps to the
login interface.
If the current VTO is not the SIP server, do not enable SIP Server; otherwise the connection
will fail.
Another VTO works as the SIP server.
Disable SIP Server, configure the parameters, and then click OK. The VTO automatically
restarts, and it jumps to the login interface.
Table 3-1 SIP server parameters when a VTO works as the SIP server
Parameter Description
IP Address IP address of the VTO that works as the SIP server.
Port 5060 by default.
Username Keep it default.
Password
SIP Domain V D P.
Login Username SIP server login username and password.
Login Pwd
The platform (Express/DSS) works as the SIP server.
Select Server Type as Express/DSS,configure the parameters, and then click OK. The
VTO automatically restarts, and it jumps to the login interface.
Table 3-2 SIP server parameters when the platform works as the SIP server
Parameter Description
IP Address IP address of the platform.
Port 5080 by default.
Username Keep it default.
Password
SIP Domain Keep it default or null.
SIP Server Username SIP server login username and password.
SIP Server Password

11
VTO settings have been completed if the platform or another VTO works as the SIP server.
If the current VTO works as the SIP server, Device Manager will appear on the left. See 3.1.1.6
Adding VTO and 3.1.1.7 Adding VTH to add VTOs and VTHs.
3.1.1.6 Adding VTO
Add VTO only when the current VTO works as the SIP server.
Log in to the web interface.
Select Household Setting > VTO No. Management.
VTO number management
Click Add.
Add a VTO
Configure the parameters.

12
Table 3-3 Parameters of adding a VTO
Parameter Description
Rec No. VTO number.
Register Password Keep it default.
IP Address IP address of VTO.
Username Web interface login username and password of this VTO.
Password
Click OK.
Do Step 3–Step 5 to add other VTOs.
3.1.1.7 Adding VTH
Add VTHs only when the current VTO works as the SIP server.
Add both main and extension VTHs.
Select Household Setting > Room No. Management.
Room number management
Click Add.
Add a VTH
Configure the parameters.

13
Table 3-4 Parameters of adding a VTH
Parameter Description
First Name
Information to distinguish each device.
Last Name
Nick Name
Room No.
VTH number consists of 1–6 numbers, which may include number
and #. It must be consistent with room number configured at the
VTH.
When there are main VTH and extensions, to use group call function,
the main VTH number must end with #0, and the extension VTH
number must end with #1, #2 and #3. For example, if the main VTH is
101#0, extension VTHs must be 101#1, 101#2…
Register Password Keep it default.
Register Type
Click OK.
Do Step 2–Step 4 to add other VTHs.
3.1.2 VTH Settings
3.1.2.1 Initialization
Select a region and language.
Select a region and language
Select Apartment or Villa, and then tap OK.
This section takes Villa as an example.

14
Select apartment or villa
Select First-time Config and tap OK.
First-time configuration
DHCP is selected by default, or select Static IP and configure the parameters as needed.