DAIICHI First7 User manual

First 7
Car-seat Manual

First 7
Car-seat Manual

About Indicative Marks
Conditions of children, who can use this product
Table of contents
For safe use
Before installing safety seat in your car
Name of each part
Seats that can install the safety seat
Seats that cannot install the safety seat
Types of seatbelts for installation
Deciding direction of safety seat
Notes
Adjustment method
How to adjust angle
How to adjust shoulder belt
How to use buckle
How to use locking lever
How to adjust height of headrest
How to Use Baby Mode
Age, weight and height of baby for Baby Mode
Angle adjustment of back support at Baby Mode
Height adjustment of shoulder belt at Baby Mode
Height adjustment of headrest at Baby Mode
Back support cushion and inner seat at Baby Mode
How to install Baby Mode (Forward facing / front installment)
Checklist for Baby Mode
How to Use Toddler Mode
Age, weight and height of baby for Toddler Mode
Angle adjustment of back support at Toddler Mode
Height adjustment of shoulder belt at Toddler Mode
How to use shoulder pad at Toddler Mode
Height adjustment of headrest at Toddler Mode
Back support cushion and inner seat at Toddler Mode
How to install Toddler Mode (Rear facing / rear installment)
Checklist for Toddler Mode
How to Use Child Mode
Maintenance and management
1
2 ~ 5
6 ~ 7
8 ~ 12
13 ~ 18
19 ~ 26
27 ~ 31
32 ~ 35
How to detach headrest
How to take off seat cover
1
1
2
2
3
3
4 ~ 5
8
9
10
11
12
13
14
14
15
15
16 ~ 18
18
19
20
20
21 ~ 22
23
23
24 ~ 26
26
27
28 ~ 30
31
31
32
32 ~ 33
*Warning : Warning label (yellow label) stuck in the front of sewing work cannot be detached.
This company does not take any responsibilities for its detachment.
Age, weight and height of baby for Child Mode
Separation and storage for Child Mode
How to install Child Mode (How to use seat belt)
Checklist for Child Mode

For safe use
About Indicative Marks
This product is safety equipment for children used in cars, which will reduce shocks to children in case of
accidents. However, it cannot perfectly (100%) save children from some cases, so please drive safely to not to
cause any accident.
To use it safely, this manual has specified important indications to follow with marks. Since it is for your safety,
please follow instructions;
Application condition (children who are suitable for this product)
Do not use this product for children who cannot fulfill following conditions.
To install it correctly and use it effectively, please read this manual thoroughly before installation or usage.
If you do not follow given instructions, you might lose your life or seriously injured.
If you do not follow given instructions, you might be seriously injured.
If you do not follow given instructions, you might be insured or cause an accident.
A checklist that must be checked for safety.
Basic instructions for safe and pleasant usage.
Danger
Warning
Caution
Caution
This safety equipment is designed for children from birth to those with weight of 25kg or under.
Classification Application condition
Weight : 0~13kg (Group 0)
Target age : Newborn infant Protect head of the baby by installing rear facing.
Baby Mode
Weight : 9~18 kg (Group 1)
Target age : 12 months
~ 5 years old
Use for forward facing.
Baby’s head should not go out the back of seat
when the baby seats on the safety seat.
Toddler Mode
Weight : 15~25 kg (Group 2)
Target age : 4 ~7 years old
Take off inner seat and 5-point belt of the child
safety seat and then use belt of the car.
Child Mode
Other conditions
Advice
Completion
Checked
1
Caution

Do not install in the seats with airbag.
Due to operation of the airbag you might lose child’s life or seriously injured.
Danger
When you equip the seat at front seat in rear facing, it might interfere your driving.
Please use it at the rear seat.
Danger
If you cannot install the safety seat as the given instruction due to different belt type or seat’s shape,
please install it at other seats. When the safety seat is not properly installed as the instruction,
you might lose child’s life or seriously injured when the car crashes or suddenly stops.
Danger
Before installing the seat in your car
Seats that can install the safety seat
2
For more detailed installing method, please refer to method for each mode.
Seats that cannot install the safety seat
Seats with airbag (when airbag comes out, you might lose your child’s life or seriously injured)
Seats without seatbelt (Child safety seat cannot be fastened)
Seats placed in sideways or opposite directions from driving directions (Difficult to absorb crash impact)
Width and length of seat is 45 cm or less (Child safety seat will be installed unstably)
Front center seats and any other seats that may interfere with driving when the safety seat is installed
(In some cases, it is hard to guarantee safety of passengers)
Seats with seat belt located in the middle of the seat
(Child safety seat cannot be fastened strongly)refer to drawing
①
Seats with belt buckles that are highly placed and are unable to fasten the child safety seat
(Child safety seat cannot be fastened)refer to drawing
②
Seats with 2-point seatbelt (Child safety seat cannot be fastened)refer to drawing ③
Child safety seat can be installed in both front and rear seats, but it is recommend to install in the rear seat
for better safety.
Rear seat (arrow shows the driving direction) Front seat (arrow shows the driving direction)
Rear facing Forward facing Rear facing Forward facing
① ② ③

Caution
For cars with airbags, children who weigh 13kg or under should be seated in the rear seat.
We recommend those children between 9 to 25kg to seat in the rear side as well.
Danger
ELR.ALR
Types of seatbelts for installation
Please use it only for 3-point seat belt that is approved by ECE NO16 or same regulation.
This safety seat cannot be equipped with 2-point seat belt.
First of all, please check the type of seat belt in the car.
Classification Special features
3-point safety belt
3-point safety belt
3-point safety belt
2-point safety belt
Safety belt
Belt fastening equipment
with safety seat installation
function
Precautions for installation Possibility
of installation
3
☆
Deciding direction of safety seat
Choose direction of installation according to weights of children.
☆
( )
In general, ELR belt will fix the safety seat, but if
you take out the entire belt, ALR function will be
started, which will be automatically fastened.
Also, when all the belts are fastened, ELR
function will start.
In general, belt will fasten and unfasten freely,
but the belt will not move when it detects any
shock (such as sudden stop).
Fasten the child safety seat firmly, and then
take out all the seatbelt to start ALR function.
Child safety seat should be tightly fastened
with locking lever.
If you stop your hand while taking out the belt,
the belt will be automatically locked up and will
not be pulled out.
In order to fix child safety seat, take out the belt
as much as required at once. Then, secure
child safety seat with locking lever.
No fastening option, but instead, adjust the
length of belt after pulling out the whole belt.
Cannot install the child safety seat.
A system that will automatically fasten up the
belt when the door is closed and unfasten
when the door is open.
Cannot install the child safety seat.
Safety belt without fastening function. Cannot install the child safety seat.
All other types of seatbelt that are not stated in
this table.
Cannot install the child safety seat.
ELR safety belt without shoulder part. Cannot install the child safety seat.
Before starting installation, read
manual of the car.
ELR
Automatic belt fastening
equipment
( )
Automatic belt fastening
equipment
( )
Non-fastening belt
ALR
NLR
( )
2-point safety belt
manual
NR
( )
Automatic seat belt
All other seatbelt
ELR
Range of child’s
weight
Weight Rear facing
(refer to p.16~18)
Forward facing
(refer to p. 22~24)
birth ~ 13kg or under
Weight 9 ~ 25kg or under

Danger
Caution
4
The user manual needs to be kept well and read accordingly when necessary.
The infant safety seat needs to be
attached according to the user
manual. If the seat is attached
inappropriately, the infant maybe
loosened from the car or hit the
glass, for example, during the crash
or the ab the abrupt stopping, risking
his or her life, or suffering serious
damage.
The product should not be used for
the seats with an airbag. When
activated, the airbag may cause the
infant to risk his or her life, or suffer
serious damage.
Be careful not to allow the infant to
push the press button of the front
pad. The fastening plate needs to be
checked for any loosening frequently.
When the plate is loosened, the infant
may risk his or her life, or suffer
critical damage when a crash or an
abrupt stopping occurs.
It shall be recommended that the
device should be changed when it
has been subject to violent stresses
in an accident.
Store the child seat in a safe place
when it is not being used.
Avoid placing heavy objects on the
top of the child seat.
It shall be recommended that children
are not left in their child restraint
system unattended.
Only suitable for use in the listed
vehicles fitted with 3-point with
retractor safety-belts, approved to
ECE Regulation No.16 or other
eauivalent standards.
(strike out what dies not apply)
Every time the infant is seated the
adjusting belt should be pulled to
seat the baby tightly. If the shoulder
belt can not function as originally
designed, the infant may risk his or
her life, or suffering critical damage.
The belt cover should be attached
for use. If the belt cover can not
function as originally designed, the
infant may risk his or her life, or
suffering critical damage.
If the infant safety seat is exposed to
direct sunlight for long hours, metal
and PVC parts may get heated. The
guardian needs to check it before
seating the infant. In summer or
when sunlight is strong, the car
needs to be parked in a shady lot, or
a towel, for example, can be used for
coverage.
When the chair is not provided with a
textile cover, it shall be recommended
that the chair should be kept away
from sunlight, otherwise it may be
too hot for the child’s skin.
사용
설명서
당긴다

5
When the infant safety seat is installed
on the passenger’s seat, it may cause
some interference, leading to inconve
nience in operating the transmission
gear or the side brake.
When such inconvenience arises,
you need to refrain from using the
product for the passenger’s seat, and
rather use it for the backseats.
When such inconvenience is caused,
it may interfere with operating the
transmission gear or the side brake,
leading to a highly risky situation.
When there is a passenger in the
back seat, the safety seat should not
be fastened to the passenger seat of
a 2-door or 3-door vehicle, or the
secondary seat near the access area
for ascending and descending in
case of the one box type vehicle or a
mini-van, in order to secure the
emergency exit.
When there is no infant in the vehicle,
the infant safety seat needs to be
stored, for example, in the trunk, or
fastened strongly within in a car.
When fastened insufficiently, the
safety seat may be shaking, causing
interference with driving.
When you need to ride together with
an infant, you should check the
attachment of the safety seat again
before driving the vehicle.
The safety seat needs to be checked
for any problems during or after the
driving (The vehicle should be parked
in a safe place first before the check
ing).
The safety seat should not be
installed or removed while the infant is
on it.
While driving, you should not operate
the infant safety seat(Belt adjustment
/Angle adjustment, for example).
The car should be parked in a safe
place first before you operate the
safety seat. If you operate the safety
seat while driving, it is highly dangero
us, because your driving will be
interfered with, possibly leading to an
accident.
Never try to modify the children seat
without authorization by the manufac
turer or the approving authority.
When using the product for a new -
born baby (Younger than 1 month
after birth), a fellow passenger, not
just the driver, needs to get on the
vehicle to pay attention to the baby.
Avoid using the product for longer
than one hour consecutively, in case
of infants ranging from newborn
babies to ones younger than 6
months, considering the burden on
them.
Be careful not to allow the infant to
play on the safety seat. You should
not allow the infant to use it as a play
apparatus.
It shall be recommended that any
luggage or other objects liable to
cause injuries in the event of a
collision shall be properly secured.
Caution
Warning

Name of each part
Shoulder belt holes
(4 levels)
Seat cover
Shoulder belt
6
Shoulder pad
Fastening plate
buckle
Belt length
adjusting lever
Angle adjusting lever
Rear facing lever
Head seat
Base
Accessories
Front of safety seat
Manual Head inner seat Inner seat Shoulder pad for toddler
Design of the inner seat can be different according to types of models.
☆

7
Belt guide
(for rear facing only)
Belt locking lever
(For both directions)
Sun visor ratch
frame
Belt path
Belt cover
Shoulder belt hanger
When taking off the belt cover
Shoulder belt hanger is required
when the height of shoulder belt is
adjusted.
MEMO
Back of safety seat

Angle adjustment for rear facing
1 2
Please stop the car to adjust each function.
Adjusting the safety seat during driving will interrupt your driving and might cause accidents.
Adjustment method
How to adjust angle
8
You can adjust angles in 4 different levels. For forward facing,
use levels 1~3 and level 4 is only for facing to rear.
When you set your child safety seat to rear facing, please adjust the angle to level 4.
Pull out the angle adjusting lever
and then push it to the back.
Lay down the main body
of the seat to level 4 (lowest level).
(To check the right angle,
refer to the arrow on the side of the main body.)
Pull out the angle adjusting lever
and then push it to the back.
Adjust the main body according to seat’s angle
of the car from level 1 to 3.
(To check the right angle,
refer to the arrow on the side of the main body.)
Levels 1~3 should be adjusted according to seat’s angle of the car.
Rear
facing
Forward facing
Warning
For child with weight of 13 kg or under
Angle adjustment for forward facing
For child with weight from 9 to 25 kg
1 2
When you set your child safety seat in forward facing, adjust angles between level 1 and 3.

Please stop the car to adjust each function.
Adjusting the safety seat during driving will interrupt your driving and might cause accidents.
Warning
Belt cover
Shoulder belt
hanger
1
2
3
How to adjust shoulder belt
9
Take off the belt cover at the back of main body to pull out the shoulder belt from its hanger.
After inserting the belt into its hanger, put on the belt cover.
Put baby in the seat and
then insert the belt to the nearest shoulder belt hole.
When you cannot see the shoulder belt hanger, pull out the front belt
so shoulder belt hanger at the back can come out to front to adjust height of belt.
Caution
Belt cover should be attach ed for use.
If the belt cannot perform its function properly, it might risk a life or serious injury.
Danger

Unfastening
1 2
Press the press button inside buckle
of button cover to take off fastening plate.
Separate joined fastening plate into upper
and lower units.
Fastening
Fastening plate
Fastening plate
Buckle
Press button
Button cover
Using the safety seat without buckle is very dangerous, so do not use the seat after unfastening buckle.
How to use buckle
10
Danger
1 2 3
Put two fastening plates together,
one in below other on top. Make sure the fastening
plate is securely fastened.
Insert the joined fastening plate
into the buckle until
you hear ‘click’ sound.
Fastening plate
Buckle
Press button
Button cover
Fastening plate
Click
Click Click
How to use buckle fastening magnet
Before putting your baby into the seat, unfasten buckle and put it on the armrest part
– it will be easier to let your baby to seat.
Side (Buckle fastening magnet)
Check!

For rear facing
Locking lever is an equipment to securely install the child safety seat
into your car. Please use it.
You will find 2 locking levers, one on each side of the main body.
Please use it according to location of installment.
locking lever
Fastening
Unfastening
Locking lever and belt guide are equipments for secure installment of child safety seat with car’s seat
belt. Please use it. If you do not use it, safety seat might be in danger, as it would not be tightened
up for shocks and abrupt stop.
Firstly, check if your car seat can install this child safety seat (refer to p.2 as some seats are not allowed
to install this product). If you cannot install safety seat as shown in this manual, do not force it to fasten up.
In this case, the safety seat might not work properly and cause unexpected accident.
When you adjust locking lever, please be careful not to jam your finger.
How to use locking lever
11
Danger
Danger
1
3
2
1 2
Push the locking lever to the side.
Unfasten buckle of car’s seat belt.
Push locking lever to the side
and then separate car’s belt.
As shown above, fix the belt with locking lever,
and then pull out the belt as much as possible
and hang it on belt guide
Pull shoulder part of car’s seat belt to make it tight
as much as possible and insert it into locking lever.
Then, pull the lever to opposite direction and push to lock.
Shoulder belt of car
Belt guide
Locking lever
Caution

Please adjust location of headrest according to size of the baby.
Otherwise, safety seat might not give the best result.
Caution
1
2
Using the safety seat without the buckle is very dangerous, so do not use the seat after unfastening
the buckle.
How to adjust height of headrest
12
Danger
Pull up adjusting lever in the middle of backside of headrest to adjust height (up and down).
Headrest can be adjusted in 7 different levels.
Lower part of headrest should be in the closest location from baby’s shoulder.

First 7
BABY MODE
How to use
Baby Mode is designed for children
aged 0 to 1 with maximum weight of 13kg.

Rear
facing
Forward facing
Whenever you seat the baby in the safety seat, pull out adjustment belt to tightly buckle up the baby.
If the belt cannot perform its function properly, it might risk a life or cause serious injury.
Danger
How to Use Baby Mode
Angle adjustment of back support at Baby Mode
Tight attachment of shoulder belt at Baby Mode
14
Set the child safety seat to angle
of level 4,
which is for rear facing.
1 2
Pull out rear facing lever
(angle adjusting lever)
and then push it to the back.
Unfasten buckle of front pad.
Pull out shoulder pad while pressing
adjustment button of the belt.
(Refer to ‘How to use buckle’ on p.10)
Seat the baby and then put on shoulder belt.
Remember to adjust height of shoulder belt
according to height of your baby’s shoulder.
(Refer to ‘Height adjustment of shoulder belt’ on p.9)
Fasten up front pad and buckle.
Pull out adjustment belt while pressing
adjustment button to securely
fasten up shoulder belt to the baby.
Lay down the main body
of the seat to level 4 (lowest level).
To check the right angle,
refer to the arrow on the side
of the main body.
1 2
3 4
Between the belt and the baby, make a gap that allows adult’s hand to move around
Caution
“Click”
to fasten Pull

Headrest should have a room of 3 cm higher from top of the baby.
Caution
Height adjustment of headrest at Baby Mode
15
Pull up adjusting lever in the middle
of backside of headrest to adjust height
(up and down).
Lower part of headrest should be in the
closest location from baby’s shoulder.
Use head inner seat of headrest together.
1 2
Back support cushion and inner seat at Baby Mode
If your child weighs over 10kg and feels
uncomfortable with inner seat,
remove back support cushion inside inner seat.
At Baby Mode,
use both back support cushion
and inner seat as much as possible.
1 2
3
Please adjust location of headrest
according to size of the baby.
Otherwise, safety seat might not give
the best result.
Caution
Back support cushion
Head inner seat
Inner seat

Danger
How to install Baby Mode(Rear facing/rear installment)
16
Pull the seat back to full upright position.
1
Caution
According to types of car’s seat belt, installment and
fixing methods vary. Please refer to check possible
and impossible seats for installment on p. 3 and then
install child safety seat in a right way.
For ELR/ALR 3-point safety belt, switch to ALR
function after installment. Do not fasten up shoulder
belt too tightly. If you have tightened up like shown
on the diagram, please re-start installment from start.
Warning
When you adjust locking lever, please be careful not
to jam your finger.
Adjust height of shoulder belt and headrest according
to the baby.
2
With angle adjusting lever,
change angle of the main body to level 4.
Put main body in opposite direction (rear facing) of driving.
Make sure the bottom of safety seat to closely touch
car’s seat as shown on the diagram.
3
4