Daikin FCAG35BVEB User guide

Installer and user reference guide
Split system air conditioners
FCAG35BVEB
FCAG50BVEB
FCAG60BVEB
FCAG71BVEB
FCAG100BVEB
FCAG125BVEB
FCAG140BVEB

Table of contents
Installer and user reference guide
2
FCAG35~140BVEB
Split system air conditioners
4P561448-1B – 2021.07
Table of contents
1 General safety precautions 5
1.1 About the documentation .............................................................................................................................................. 5
1.1.1 Meaning of warnings and symbols ................................................................................................................ 5
1.2 For the user..................................................................................................................................................................... 6
1.3 For the installer............................................................................................................................................................... 7
1.3.1 General ........................................................................................................................................................... 7
1.3.2 Installation site ............................................................................................................................................... 8
1.3.3 Refrigerant — in case of R410A or R32.......................................................................................................... 11
1.3.4 Brine................................................................................................................................................................ 13
1.3.5 Water .............................................................................................................................................................. 13
1.3.6 Electrical ......................................................................................................................................................... 14
2 About the documentation 16
2.1 About this document ...................................................................................................................................................... 16
For the installer 17
3 About the box 18
3.1 Overview: About the box ................................................................................................................................................ 18
3.2 Indoor unit ...................................................................................................................................................................... 18
3.2.1 To unpack and handle the unit ...................................................................................................................... 18
3.2.2 To remove the accessories from the indoor unit .......................................................................................... 19
4 About the units and options 20
4.1 Overview: About the units and options.......................................................................................................................... 20
4.2 Identification ................................................................................................................................................................... 20
4.2.1 Identification label: Indoor unit ..................................................................................................................... 20
4.3 About the indoor unit ..................................................................................................................................................... 20
4.4 System layout.................................................................................................................................................................. 22
4.5 Combining units and options.......................................................................................................................................... 23
4.5.1 Possible options for the indoor unit............................................................................................................... 23
5 Preparation 24
5.1 Overview: Preparation.................................................................................................................................................... 24
5.2 Preparing the installation site......................................................................................................................................... 24
5.2.1 Installation site requirements of the indoor unit .......................................................................................... 24
5.3 Preparing refrigerant piping ........................................................................................................................................... 27
5.3.1 Refrigerant piping requirements.................................................................................................................... 27
5.3.2 Refrigerant piping insulation.......................................................................................................................... 27
5.4 Preparing electrical wiring .............................................................................................................................................. 28
5.4.1 About preparing electrical wiring................................................................................................................... 28
6 Installation 29
6.1 Overview: Installation ..................................................................................................................................................... 29
6.2 Mounting the indoor unit ............................................................................................................................................... 29
6.2.1 Precautions when mounting the indoor unit................................................................................................. 29
6.2.2 Guidelines when installing the indoor unit.................................................................................................... 30
6.2.3 Guidelines when installing the drain piping................................................................................................... 32
6.3 Connecting the refrigerant piping .................................................................................................................................. 35
6.3.1 About connecting the refrigerant piping ....................................................................................................... 35
6.3.2 Precautions when connecting the refrigerant piping.................................................................................... 36
6.3.3 Guidelines when connecting the refrigerant piping...................................................................................... 37
6.3.4 Pipe bending guidelines ................................................................................................................................. 37
6.3.5 To flare the pipe end ...................................................................................................................................... 37
6.3.6 To connect the refrigerant piping to the indoor unit .................................................................................... 38
6.4 Connecting the electrical wiring..................................................................................................................................... 39
6.4.1 About connecting the electrical wiring.......................................................................................................... 39
6.4.2 Precautions when connecting the electrical wiring....................................................................................... 39
6.4.3 Guidelines when connecting the electrical wiring......................................................................................... 40
6.4.4 Specifications of standard wiring components.............................................................................................. 40
6.4.5 To connect the electrical wiring to the indoor unit....................................................................................... 41
7 Configuration 44
7.1 Field setting..................................................................................................................................................................... 44

Table of contents
Installer and user reference guide
3
FCAG35~140BVEB
Split system air conditioners
4P561448-1B – 2021.07
8 Commissioning 47
8.1 Overview: Commissioning .............................................................................................................................................. 47
8.2 Precautions when commissioning.................................................................................................................................. 47
8.3 Checklist before commissioning..................................................................................................................................... 48
8.4 To perform a test run...................................................................................................................................................... 48
8.5 Error codes when performing a test run........................................................................................................................ 50
9 Hand-over to the user 51
10 Disposal 52
11 Technical data 53
11.1 Piping diagram: Indoor unit ............................................................................................................................................ 53
11.2 Wiring diagram................................................................................................................................................................ 53
11.2.1 Unified wiring diagram legend ....................................................................................................................... 53
For the user 57
12 About the system 58
12.1 System layout.................................................................................................................................................................. 58
12.2 Information requirements for fan coil units................................................................................................................... 59
13 User interface 60
14 Before operation 61
15 Operation 62
15.1 Operation range.............................................................................................................................................................. 62
15.2 Operating the system ..................................................................................................................................................... 63
15.2.1 About operating the system........................................................................................................................... 63
15.2.2 About cooling, heating, fan only, and automatic operation ......................................................................... 64
15.2.3 About the heating operation.......................................................................................................................... 64
15.2.4 To operate the system ................................................................................................................................... 64
15.3 Using the dry program .................................................................................................................................................... 65
15.3.1 About the dry program................................................................................................................................... 65
15.3.2 To use the dry program.................................................................................................................................. 65
15.4 Adjusting the air flow direction ...................................................................................................................................... 65
15.4.1 About the air flow flap.................................................................................................................................... 65
15.5 Active circulation airflow ................................................................................................................................................ 66
15.5.1 To start the active circulation airflow ............................................................................................................ 66
16 Energy saving and optimum operation 68
17 Maintenance and service 69
17.1 Precautions for maintenance and service...................................................................................................................... 69
17.2 Cleaning the air filter, suction grille, air outlet and outside panels............................................................................... 69
17.2.1 To clean the air filter ...................................................................................................................................... 70
17.2.2 To clean the suction grille .............................................................................................................................. 71
17.2.3 To clean the air outlet and outside panels .................................................................................................... 72
17.3 Maintenance after a long stop period............................................................................................................................ 72
17.4 Maintenance before a long stop period......................................................................................................................... 73
17.5 About the refrigerant...................................................................................................................................................... 73
17.6 After-sales service and warranty .................................................................................................................................... 74
17.6.1 Warranty period ............................................................................................................................................. 74
17.6.2 Recommended maintenance and inspection................................................................................................ 74
17.6.3 Recommended maintenance and inspection cycles ..................................................................................... 74
17.6.4 Shortened maintenance and replacement cycles ......................................................................................... 75
18 Troubleshooting 77
18.1 Symptoms that are NOT system malfunctions............................................................................................................... 78
18.1.1 Symptom: The system does not operate....................................................................................................... 78
18.1.2 Symptom: The fan speed does not correspond to the setting...................................................................... 78
18.1.3 Symptom: The fan direction does not correspond to the setting................................................................. 78
18.1.4 Symptom: White mist comes out of a unit (Indoor unit) .............................................................................. 78
18.1.5 Symptom: White mist comes out of a unit (Indoor unit, outdoor unit)........................................................ 78
18.1.6 Symptom: The user interface reads "U4" or "U5" and stops, but then restarts after a few minutes.......... 79
18.1.7 Symptom: Noise of air conditioners (Indoor unit)......................................................................................... 79
18.1.8 Symptom: Noise of air conditioners (Indoor unit, outdoor unit) .................................................................. 79
18.1.9 Symptom: Noise of air conditioners (Outdoor unit)...................................................................................... 79
18.1.10 Symptom: Dust comes out of the unit........................................................................................................... 79
18.1.11 Symptom: The units can give off odours ....................................................................................................... 79

Table of contents
Installer and user reference guide
4
FCAG35~140BVEB
Split system air conditioners
4P561448-1B – 2021.07
18.1.12 Symptom: The outdoor unit fan does not spin.............................................................................................. 79
18.1.13 Symptom: The display shows "88"................................................................................................................. 79
18.1.14 Symptom: The compressor in the outdoor unit does not stop after a short heating operation ................. 80
19 Relocation 81
20 Disposal 82
21 Glossary 83

1 | General safety precautions
Installer and user reference guide
5
FCAG35~140BVEB
Split system air conditioners
4P561448-1B – 2021.07
1 General safety precautions
1.1 About the documentation
▪The original documentation is written in English. All other languages are
translations.
▪The precautions described in this document cover very important topics, follow
them carefully.
▪The installation of the system, and all activities described in the installation
manual and in the installer reference guide MUST be performed by an authorised
installer.
1.1.1 Meaning of warnings and symbols
DANGER
Indicates a situation that results in death or serious injury.
DANGER: RISK OF ELECTROCUTION
Indicates a situation that could result in electrocution.
DANGER: RISK OF BURNING/SCALDING
Indicates a situation that could result in burning/scalding because of extreme hot or
cold temperatures.
DANGER: RISK OF EXPLOSION
Indicates a situation that could result in explosion.
WARNING
Indicates a situation that could result in death or serious injury.
WARNING: FLAMMABLE MATERIAL
CAUTION
Indicates a situation that could result in minor or moderate injury.
NOTICE
Indicates a situation that could result in equipment or property damage.
INFORMATION
Indicates useful tips or additional information.
Symbols used on the unit:

1 | General safety precautions
Installer and user reference guide
6
FCAG35~140BVEB
Split system air conditioners
4P561448-1B – 2021.07
Symbol Explanation
Before installation, read the installation and operation
manual, and the wiring instruction sheet.
Before performing maintenance and service tasks, read the
service manual.
For more information, see the installer and user reference
guide.
The unit contains rotating parts. Be careful when servicing or
inspecting the unit.
Symbols used in the documentation:
Symbol Explanation
Indicates a figure title or a reference to it.
Example: " 1–3 Figure title" means "Figure 3 in chapter 1".
Indicates a table title or a reference to it.
Example: " 1–3 Table title" means "Table 3 in chapter 1".
1.2 For the user
WARNING
If you are NOT sure how to operate the unit, contact your
installer.
WARNING
This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the
hazards involved.
Children SHALL NOT play with the appliance.
Cleaning and user maintenance SHALL NOT be made by
children without supervision.
WARNING
To prevent electrical shocks or fire:
▪Do NOT rinse the unit.
▪Do NOT operate the unit with wet hands.
▪Do NOT place any objects containing water on the unit.

1 | General safety precautions
Installer and user reference guide
7
FCAG35~140BVEB
Split system air conditioners
4P561448-1B – 2021.07
CAUTION
▪Do NOT place any objects or equipment on top of the
unit.
▪Do NOT sit, climb or stand on the unit.
▪Units are marked with the following symbol:
This means that electrical and electronic products may NOT be mixed with
unsorted household waste. Do NOT try to dismantle the system yourself: the
dismantling of the system, treatment of the refrigerant, of oil and of other parts
must be done by an authorized installer and must comply with applicable
legislation.
Units must be treated at a specialized treatment facility for reuse, recycling and
recovery. By ensuring this product is disposed of correctly, you will help to
prevent potential negative consequences for the environment and human
health. For more information, contact your installer or local authority.
▪Batteries are marked with the following symbol:
This means that the batteries may NOT be mixed with unsorted household
waste. If a chemical symbol is printed beneath the symbol, this chemical symbol
means that the battery contains a heavy metal above a certain concentration.
Possible chemical symbols are: Pb: lead (>0.004%).
Waste batteries must be treated at a specialized treatment facility for reuse. By
ensuring waste batteries are disposed of correctly, you will help to prevent
potential negative consequences for the environment and human health.
1.3 For the installer
1.3.1 General
If you are NOT sure how to install or operate the unit, contact your dealer.
DANGER: RISK OF BURNING/SCALDING
▪Do NOT touch the refrigerant piping, water piping or internal parts during and
immediately after operation. It could be too hot or too cold. Give it time to return
to normal temperature. If you must touch it, wear protective gloves.
▪Do NOT touch any accidental leaking refrigerant.
WARNING
Improper installation or attachment of equipment or accessories could result in
electrical shock, short-circuit, leaks, fire or other damage to the equipment. Only use
accessories, optional equipment and spare parts made or approved by Daikin.

1 | General safety precautions
Installer and user reference guide
8
FCAG35~140BVEB
Split system air conditioners
4P561448-1B – 2021.07
WARNING
Make sure installation, testing and applied materials comply with applicable
legislation (on top of the instructions described in the Daikin documentation).
CAUTION
Wear adequate personal protective equipment (protective gloves, safety glasses,…)
when installing, maintaining or servicing the system.
WARNING
Tear apart and throw away plastic packaging bags so that nobody, especially
children, can play with them. Possible risk: suffocation.
WARNING
Provide adequate measures to prevent that the unit can be used as a shelter by small
animals. Small animals that make contact with electrical parts can cause
malfunctions, smoke or fire.
CAUTION
Do NOT touch the air inlet or aluminium fins of the unit.
CAUTION
▪Do NOT place any objects or equipment on top of the unit.
▪Do NOT sit, climb or stand on the unit.
NOTICE
Works executed on the outdoor unit are best done under dry weather conditions to
avoid water ingress.
In accordance with the applicable legislation, it might be necessary to provide a
logbook with the product containing at least: information on maintenance, repair
work, results of tests, stand-by periods,…
Also, at least, following information MUST be provided at an accessible place at the
product:
▪Instructions for shutting down the system in case of an emergency
▪Name and address of fire department, police and hospital
▪Name, address and day and night telephone numbers for obtaining service
In Europe, EN378 provides the necessary guidance for this logbook.
1.3.2 Installation site
▪Provide sufficient space around the unit for servicing and air circulation.
▪Make sure the installation site withstands the weight and vibration of the unit.
▪Make sure the area is well ventilated. Do NOT block any ventilation openings.
▪Make sure the unit is level.
Do NOT install the unit in the following places:
▪In potentially explosive atmospheres.

1 | General safety precautions
Installer and user reference guide
9
FCAG35~140BVEB
Split system air conditioners
4P561448-1B – 2021.07
▪In places where there is machinery that emits electromagnetic waves.
Electromagnetic waves may disturb the control system, and cause malfunction of
the equipment.
▪In places where there is a risk of fire due to the leakage of flammable gases
(example: thinner or gasoline), carbon fibre, ignitable dust.
▪In places where corrosive gas (example: sulphurous acid gas) is produced.
Corrosion of copper pipes or soldered parts may cause the refrigerant to leak.
Instructions for equipment using R32 refrigerant
WARNING
▪Do NOT pierce or burn.
▪Do NOT use means to accelerate the defrosting process or to clean the
equipment, other than those recommended by the manufacturer.
▪Be aware that R32 refrigerant does NOT contain an odour.
WARNING
The appliance shall be stored so as to prevent mechanical damage and in a well-
ventilated room without continuously operating ignition sources (example: open
flames, an operating gas appliance or an operating electric heater) and have a room
size as specified below.
WARNING
Make sure installation, servicing, maintenance and repair comply with instructions
from Daikin and with applicable legislation (for example national gas regulation) and
are executed only by authorised persons.
NOTICE
▪Precautions shall be taken to avoid excessive vibration or pulsation to
refrigeration piping.
▪Protection devices, piping and fittings shall be protected as far as possible against
adverse environmental effects.
▪Provision shall be made for expansion and contraction of long runs of piping.
▪Piping in refrigerating systems shall be designed and installed such as to minimise
the likelihood of hydraulic shock damaging the system.
▪The indoor equipment and pipes shall be securely mounted and guarded such
that accidental rupture of equipment or pipes cannot occur from events such as
moving furniture or reconstruction activities.
CAUTION
Do NOT use potential sources of ignition in searching for or detection of refrigerant
leaks.
NOTICE
▪Do NOT re-use joints and copper gaskets which have been used already.
▪Joints made in installation between parts of refrigerant system shall be accessible
for maintenance purposes.

1 | General safety precautions
Installer and user reference guide
10
FCAG35~140BVEB
Split system air conditioners
4P561448-1B – 2021.07
Installation space requirements
WARNING
If appliances contain R32 refrigerant, the floor area of the room in which the
appliances are installed, operated and stored MUST be larger than the minimum
floor area defined in table below A (m2). This applies to:
▪Indoor units without a refrigerant leakage sensor; in case of indoor units with
refrigerant leakage sensor, consult the installation manual
▪Outdoor units installed or stored indoors (e.g. winter garden, garage, machinery
room)
NOTICE
▪Pipework shall be protected from physical damage.
▪Installation of pipework shall be kept to a minimum.
To determine the minimum floor area
1Determine the total refrigerant charge in the system (= factory refrigerant
charge + additional refrigerant amount charged).
Contains fluorinated greenhouse gases
2
11
1
2
2kg
tCO
2
eq
1000
GWP × kg
=
=
+
kg
=
kg
=
GWP: xxx
R32
2Determine which graph or table to use.
▪For indoor units: Is the unit ceiling-mounted, wall-mounted or floor-
standing?
▪For outdoor units installed or stored indoors, this depends on the installation
height:
If the installation height is… Then use the graph or table for…
<1.8m Floor-standing units
1.8≤x<2.2m Wall-mounted units
≥2.2m Ceiling-mounted units
3Use the graph or table to determine the minimum floor area.

1 | General safety precautions
Installer and user reference guide
11
FCAG35~140BVEB
Split system air conditioners
4P561448-1B – 2021.07
0
10
20
30
40
50
60
70 80
90
100
110
120
130
140
150
160
170
180
190
200
210
220
230
240
250
260
270
280
290
300
310
320
330
340
350
360
370
380
390
400
410
420
430
440
450
460
470
480
490
500
510
520
530
540
550
560
570
580
590
600
610
620
630
640
650
660
670
680
690
700
710
720
730
740
750
760
770
1.843 9.55
2.21.8
2.4 2.8 3.2 3.6 4 4.4 4.8 5.2 5.6 6 6.4 6.8 7.2 7.6 8 8.4 8.8 9.22
2.6 3 3.4 3.8 4.2 4.6 5 5.4 5.8 6.2 6.6 7 7.4 7.8 8.2 8.6 9 9.4
Floor-standing unit
(c)
Wall-mounted unit
(b)
Ceiling-mounted unit
(a)
m [kg]
Amin [m2]
Ceiling-mounted
unit(a)
4.6 13.4 4.6 180
4.8 14.6 4.8 196
5.0 15.8 5.0 213
≤1.842 —
5.2 17.1
≤1.842 —
5.2 230
1.843 3.64
5.4 18.5
1.843 28.9
5.4 248
2.0 3.95
5.6 19.9
2.0 34.0
5.6 267
2.2 4.34
5.8 21.3
2.2 41.2
5.8 286
2.4 4.74
6.0 22.8
2.4 49.0
6.0 306
2.6 5.13
6.2 24.3
2.6 57.5
6.2 327
2.8 5.53
6.4 25.9
2.8 66.7
6.4 349
3.0 5.92
6.6 27.6
3.0 76.6
6.6 371
3.2 6.48
6.8 29.3
3.2 87.2
6.8 394
3.4 7.32
7.0 31.0
3.4 98.4
7.0 417
3.6 8.20
7.2 32.8
3.6 110
7.2 441
3.8 9.14
7.4 34.7
3.8 123
7.4 466
4.0 10.1
7.6 36.6
4.0 136
7.6 492
4.2 11.2
7.8 38.5
4.2 150
7.8 518
4.4 12.3 4.4 165
m (kg) Amin (m2)
4.6 20.0
4.8 21.8
5.0 23.6
≤1.842 —
5.2 25.6
1.843 4.45
5.4 27.6
2.0 4.83
5.6 29.7
2.2 5.31
5.8 31.8
2.4 5.79
6.0 34.0
2.6 6.39
6.2 36.4
2.8 7.41
6.4 38.7
3.0 8.51
6.6 41.2
3.2 9.68
6.8 43.7
3.4 10.9
7.0 46.3
3.6 12.3
7.2 49.0
3.8 13.7
7.4 51.8
4.0 15.1
7.6 54.6
4.2 16.7
7.8 57.5
4.4 18.3
8 40.5
8.2 42.6
8.4 44.7
8.6 46.8
8.8 49.0
9 51.3
9.2 53.6
9.4 55.9
9.55 57.7
8 60.5
8.2 63.6
8.4 66.7
8.6 69.9
8.8 73.2
9 76.6
9.2 80.0
9.4 83.6
9.55 86.2
8 545
8.2 572
8.4 601
8.6 629
8.8 659
9 689
9.2 720
9.4 752
9.55 776
Wall-mounted
unit(b)
m (kg) Amin (m2)
Floor-standing
unit(c)
m (kg) Amin (m2)
mTotal refrigerant charge in the system
Amin Minimum floor area
(a) Ceiling-mounted unit (= Ceiling-mounted unit)
(b) Wall-mounted unit (= Wall-mounted unit)
(c) Floor-standing unit (= Floor-standing unit)
1.3.3 Refrigerant — in case of R410A or R32
If applicable. See the installation manual or installer reference guide of your
application for more information.
NOTICE
Make sure refrigerant piping installation complies with applicable legislation. In
Europe, EN378 is the applicable standard.
NOTICE
Make sure the field piping and connections are NOT subjected to stress.
WARNING
During tests, NEVER pressurize the product with a pressure higher than the
maximum allowable pressure (as indicated on the nameplate of the unit).

1 | General safety precautions
Installer and user reference guide
12
FCAG35~140BVEB
Split system air conditioners
4P561448-1B – 2021.07
WARNING
Take sufficient precautions in case of refrigerant leakage. If refrigerant gas leaks,
ventilate the area immediately. Possible risks:
▪Excessive refrigerant concentrations in a closed room can lead to oxygen
deficiency.
▪Toxic gas might be produced if refrigerant gas comes into contact with fire.
DANGER: RISK OF EXPLOSION
Pump down – Refrigerant leakage. If you want to pump down the system, and there
is a leak in the refrigerant circuit:
▪Do NOT use the unit's automatic pump down function, with which you can collect
all refrigerant from the system into the outdoor unit. Possible consequence: Self-
combustion and explosion of the compressor because of air going into the
operating compressor.
▪Use a separate recovery system so that the unit's compressor does NOT have to
operate.
WARNING
ALWAYS recover the refrigerant. Do NOT release them directly into the environment.
Use a vacuum pump to evacuate the installation.
NOTICE
After all the piping has been connected, make sure there is no gas leak. Use nitrogen
to perform a gas leak detection.
NOTICE
▪To avoid compressor breakdown, do NOT charge more than the specified amount
of refrigerant.
▪When the refrigerant system is to be opened, refrigerant MUST be treated
according to the applicable legislation.
WARNING
Make sure there is no oxygen in the system. Refrigerant may only be charged after
performing the leak test and the vacuum drying.
Possible consequence: Self-combustion and explosion of the compressor because of
oxygen going into the operating compressor.
▪In case recharge is required, see the nameplate of the unit. It states the type of
refrigerant and necessary amount.
▪The unit is factory charged with refrigerant and depending on pipe sizes and pipe
lengths some systems require additional charging of refrigerant.
▪Only use tools exclusively for the refrigerant type used in the system, this to
ensure pressure resistance and prevent foreign materials from entering into the
system.
▪Charge the liquid refrigerant as follows:

1 | General safety precautions
Installer and user reference guide
13
FCAG35~140BVEB
Split system air conditioners
4P561448-1B – 2021.07
If Then
A siphon tube is present
(i.e., the cylinder is marked with "Liquid
filling siphon attached")
Charge with the cylinder upright.
A siphon tube is NOT present Charge with the cylinder upside down.
▪Open refrigerant cylinders slowly.
▪Charge the refrigerant in liquid form. Adding it in gas form may prevent normal
operation.
CAUTION
When the refrigerant charging procedure is done or when pausing, close the valve of
the refrigerant tank immediately. If the valve is NOT closed immediately, remaining
pressure might charge additional refrigerant. Possible consequence: Incorrect
refrigerant amount.
1.3.4 Brine
If applicable. See the installation manual or installer reference guide of your
application for more information.
WARNING
The selection of the brine MUST be in accordance with the applicable legislation.
WARNING
Take sufficient precautions in case of brine leakage. If brine leaks, ventilate the area
immediately and contact your local dealer.
WARNING
The ambient temperature inside the unit can get much higher than that of the room,
e.g. 70°C. In case of a brine leak, hot parts inside the unit can create a hazardous
situation.
WARNING
The use and installation of the application MUST comply with the safety and
environmental precautions specified in the applicable legislation.
1.3.5 Water
If applicable. See the installation manual or installer reference guide of your
application for more information.
NOTICE
Make sure water quality complies with EU directive 98/83EC.

1 | General safety precautions
Installer and user reference guide
14
FCAG35~140BVEB
Split system air conditioners
4P561448-1B – 2021.07
1.3.6 Electrical
DANGER: RISK OF ELECTROCUTION
▪Turn OFF all power supply before removing the switch box cover, connecting
electrical wiring or touching electrical parts.
▪Disconnect the power supply for more than 10minutes, and measure the voltage
at the terminals of main circuit capacitors or electrical components before
servicing. The voltage MUST be less than 50VDC before you can touch electrical
components. For the location of the terminals, see the wiring diagram.
▪Do NOT touch electrical components with wet hands.
▪Do NOT leave the unit unattended when the service cover is removed.
WARNING
If NOT factory installed, a main switch or other means for disconnection, having a
contact separation in all poles providing full disconnection under overvoltage
categoryIII condition, MUST be installed in the fixed wiring.
WARNING
▪ONLY use copper wires.
▪Make sure the field wiring complies with the applicable legislation.
▪All field wiring MUST be performed in accordance with the wiring diagram
supplied with the product.
▪NEVER squeeze bundled cables and make sure they do NOT come in contact with
the piping and sharp edges. Make sure no external pressure is applied to the
terminal connections.
▪Make sure to install earth wiring. Do NOT earth the unit to a utility pipe, surge
absorber, or telephone earth. Incomplete earth may cause electrical shock.
▪Make sure to use a dedicated power circuit. NEVER use a power supply shared by
another appliance.
▪Make sure to install the required fuses or circuit breakers.
▪Make sure to install an earth leakage protector. Failure to do so may cause
electrical shock or fire.
▪When installing the earth leakage protector, make sure it is compatible with the
inverter (resistant to high frequency electric noise) to avoid unnecessary opening
of the earth leakage protector.
CAUTION
▪When connecting the power supply: connect the earth cable first, before making
the current-carrying connections.
▪When disconnecting the power supply: disconnect the current-carrying cables
first, before separating the earth connection.
▪The length of the conductors between the power supply stress relief and the
terminal block itself must be as such that the current-carrying wires are tautened
before the earth wire is in case the power supply is pulled loose from the stress
relief.

1 | General safety precautions
Installer and user reference guide
15
FCAG35~140BVEB
Split system air conditioners
4P561448-1B – 2021.07
NOTICE
Precautions when laying power wiring:
▪Do NOT connect wiring of different thicknesses to the power terminal block (slack
in the power wiring may cause abnormal heat).
▪When connecting wiring which is the same thickness, do as shown in the figure
above.
▪For wiring, use the designated power wire and connect firmly, then secure to
prevent outside pressure being exerted on the terminal board.
▪Use an appropriate screwdriver for tightening the terminal screws. A screwdriver
with a small head will damage the head and make proper tightening impossible.
▪Over-tightening the terminal screws may break them.
WARNING
▪After finishing the electrical work, confirm that each electrical component and
terminal inside the electrical components box is connected securely.
▪Make sure all covers are closed before starting up the unit.
NOTICE
Only applicable if the power supply is three‑phase, and the compressor has an ON/
OFF starting method.
If there exists the possibility of reversed phase after a momentary black out and the
power goes on and off while the product is operating, attach a reversed phase
protection circuit locally. Running the product in reversed phase can break the
compressor and other parts.

2 | About the documentation
Installer and user reference guide
16
FCAG35~140BVEB
Split system air conditioners
4P561448-1B – 2021.07
2 About the documentation
2.1 About this document
Target audience
Authorised installers + end users
INFORMATION
This appliance is intended to be used by expert or trained users in shops, in light
industry, and on farms, or for commercial and household use by lay persons.
Documentation set
This document is part of a documentation set. The complete set consists of:
▪General safety precautions:
-Safety instructions that you must read before installing
-Format: Paper (in the box of the indoor unit)
▪Indoor unit installation and operation manual:
-Installation and operation instructions
-Format: Paper (in the box of the indoor unit)
▪Installer and user reference guide:
-Preparation of the installation, good practices, reference data,…
-Detailed step-by-step instructions and background information for basic and
advanced usage
-Format: Digital files on http://www.daikineurope.com/support-and-manuals/
product-information/
Latest revisions of the supplied documentation may be available on the regional
Daikin website or via your dealer.
The original documentation is written in English. All other languages are
translations.
Technical engineering data
▪A subset of the latest technical data is available on the regional Daikin website
(publicly accessible).
▪The full set of latest technical data is available on the Daikin Business Portal
(authentication required).

For the installer
Installer and user reference guide
17
FCAG35~140BVEB
Split system air conditioners
4P561448-1B – 2021.07
For the installer

3 | About the box
Installer and user reference guide
18
FCAG35~140BVEB
Split system air conditioners
4P561448-1B – 2021.07
3 About the box
3.1 Overview: About the box
This chapter describes what you have to do after the box with the indoor unit is
delivered on-site.
It contains information about:
▪Unpacking and handling the unit
▪Removing the accessories from the unit
Keep the following in mind:
▪At delivery, the unit MUST be checked for damage. Any damage MUST be
reported immediately to the claims agent of the carrier.
▪Bring the packed unit as close as possible to its final installation position to
prevent damage during transport.
▪Prepare the path along which you want to bring the unit inside in advance.
3.2 Indoor unit
WARNING: MILDLY FLAMMABLE MATERIAL
The R32 refrigerant (if applicable) in this unit is mildly flammable. Refer to the
outdoor unit specifications for the type of refrigerant to be used.
3.2.1 To unpack and handle the unit
Use a sling of soft material or protective plates together with a rope when lifting
the unit. This to avoid damage or scratches to the unit.
1Lift the unit by holding on to the hanger brackets without exerting any
pressure on other parts, especially on refrigerant piping, drain piping and
other resin parts.
1 2

3 | About the box
Installer and user reference guide
19
FCAG35~140BVEB
Split system air conditioners
4P561448-1B – 2021.07
3.2.2 To remove the accessories from the indoor unit
1×
1× 1×
8× 4×1×1× 1×
a
4×
1× 1×
7×
e fdcb
h i
m
g
j
k l
aPaper pattern for installation (upper part of packing)
bGeneral safety precautions
cIndoor unit installation and operation manual
dInstallation guide
eWashers for hanger brackets
fScrews (to temporarily attach the paper pattern for installation to the indoor unit)
gCable ties
hMetal clamp
iSealing pads: Large (drain pipe), medium 1 (gas pipe), medium 2 (liquid pipe), small
(electrical wiring)
jDrain hose
kInsulation piece: Small (liquid pipe)
lInsulation piece: Large (gas pipe)
mInsulation piece (drain pipe)

4 | About the units and options
Installer and user reference guide
20
FCAG35~140BVEB
Split system air conditioners
4P561448-1B – 2021.07
4 About the units and options
4.1 Overview: About the units and options
This chapter contains information about:
▪Identifying the indoor unit
▪Combining outdoor and indoor units
▪Combining the indoor unit with options
INFORMATION
For year‑round cooling applications with low indoor humidity conditions, such as
Electronic Data Processing rooms, contact your dealer or see the engineering
databook or the service manual.
4.2 Identification
NOTICE
When installing or servicing several units at the same time, make sure NOT to switch
the service panels between different models.
4.2.1 Identification label: Indoor unit
Location
4.3 About the indoor unit
Use the system in the following temperature and humidity ranges for safe and
effective operation.
In combination with R410A outdoor units
Outdoor units Cooling Heating
RR71~125 –15~46°CDB —
12~28°CWB —
RQ71~125 –5~46°CDB –10~15°CWB
12~28°CWB 10~27°CDB