• Indoor Units • R-410A • FUQ-BVV1B
6
• Split Sky Air • Indoor Units
8
6 Dimensional drawing & centre of gravity
6 - 1 Dimensional drawing
3D013860D
FUQ71B
1
Liquid pipe connection - J9.5 flare
2 Gas pipe connection J15.9 flare
3 Drain pipe connection V.P.20
4 Air outlet
5 Air suction grille
6 Corner decoration cover
7 Right pipe / wiring connection
8 Rear pipe / wiring connection
9 Pipe through cover
10 Accessory drain elbow
790 (Suspension position)
Note:
1. Location for manufacture’s label: on bell mouth.
2. This is where the signal of infrared remote control
is received. Refer to the drawing of infrared
remote control in detail.
3. When closing the discharge grill (2 or 3 way
discharge), direction of pipe connection will be
limited, please refer to installation manual.
unit (mm)
z1500 mm or
more
z1500 mm or
more
z1500 mm or more
z1500 mm
or more
Required space
zWhen closing the discharge grill, the required space is
30mm or more. (Note 3)
790
Suspension position
Suspension bolt
Height of suspension bracket
1000mm or more
(required space)
Drain connection
location for rear piping
Drain connection
location for upper
piping
z
Drain pipe can be raised up to 350mm from the top surface of the product.
Brand name plate (note 2)
FUQ100-125B
1
Liquid pipe connection - J9.5 flare
2 Gas pipe connection J15.9 flare
3 Drain pipe connection V.P.20
4 Air outlet
5 Air suction grille
6 Corner decoration cover
7 Right pipe / wiring connection
8 Rear pipe / wiring connection
9 Pipe through cover
10 Accessory drain elbow
790 (Suspension position)
Note:
1. Location for manufacture’s label: on bell mouth.
2. This is where the signal of infrared remote control
is received. Refer to the drawing of infrared
remote control in detail.
3. When closing the discharge grill (2 or 3 way
discharge), direction of pipe connection will be
limited, please refer to installation manual.
unit (mm)
z1500 mm or
more
z1500 mm or
more
z1500 mm or more
z1500 mm
or more
3D044898
B
Required space
zWhen closing the discharge grill, the required space is
30mm or more. (Note 3)
790
Suspension position
Suspension bolt
Height of suspension bracket
1000mm or more
(required space)
Drain connection
location for rear
piping
Drain connection
location for upper
piping
z
Drain pipe can be raised up to 350mm from the top surface of the product.
Brand name plate (note 2)