Daikin OM-GS02-02110 User manual

TURBO
QUIET SLEEP
MODE
TIMER
CANCEL
ON OFF
SWING FAN
CANCEL CLOCK
OPERATING
MANUAL
English
Operating Manual
Handset Wireless
OM-GS02-0211(0)-DAIKIN (SASO)
Part No.: R08019036067
OM-EN-GS02-0211(0)-Daikin (saso)1 1 6/10/11 8:40:30 AM

GS02 Remote Control Indication
TURBO
QUIET SLEEP
MODE
TIMER
CANCEL
ON OFF
SWING FAN
CANCEL CLOCK
3
5
12
7
11
9
6
1
2
4
8
10
13
i
OM-EN-GS02-0211(0)-Daikin (saso)2 2 6/10/11 8:40:32 AM

ii
HOW TO MOUNT ONTO THE WALL
TO INSERT BATTERIES (AAA.R03)
TURBO
QUIET SLEEP
MODE
TIMER
CANCEL
ON OFF
SWING FAN
CANCEL CLOCK
TURBO
QUIET SLEEP
MODE
TIMER
CANCEL
ON OFF
SWING FAN
CANCEL CLOCK
21
3
R03 / AAA 1.5V
R03 / AAA 1.5V
Remove batteries if the air conditioner
is not in use for a long period of time.
Use 2 "AAA" 1.5V Batteries.
OM-EN-GS02-0211(0)-Daikin (saso)3 3 6/10/11 8:40:32 AM

REMOTE CONTROLLER LOSS PREVENTION WITH BALL CHAIN
(OPTIONAL)
Remote controller
Screw Wall attachment screw
Holder
Ball chain (350mm)
iii
Installation
1. Match the ring at the end of the ball chain with the screw hole on the back of the remote
controller and secure it with the screw.
2. Attach the holder and the ball chain as above at the position where signals from the
remote controller can be received easily.
3. Pass the ball chain through the back of the holder and match the ring at the end of the
ball chain to the upper hole of the holder. Fix the holder to the wall by putting through
2 screws across it.
OM-EN-GS02-0211(0)-Daikin (saso)4 4 6/10/11 8:40:33 AM

ENGLISH
1
OPERATING GUIDE
1. Transmission source
• The source where the signal will be transmitted.
2. Signal transmission indication
• Blink to conÀrm that the last setting has been transmitted to the unit.
3. “ON/OFF” Button
• Press once to start the air conditioner unit.
• Press again to stop the unit.
4. Fan speed selection
• Pressing the
button continuously will toggle the fan speed in the following
order:
Low Med High Auto
• Stop pressing when the desired fan speed appears on the display screen.
5. Operation mode
• Press the MODE button to select the type of operating mode.
• For cooling only unit, the available modes are: COOL ( ), DRY ( )and
FAN ( ).
• For heat pump unit, the available modes are: AUTO ( ), COOL ( ), DRY ( ),
FAN ( )and HEAT ( ).
• The AUTO ( )mode is unavailable for chilled water system.
6. Automatic air swing
• Press the SWING button to activate the automatic air swing function.
• To distribute the air to a speciÀc direction, press the SWING button and wait
until the louver move to the desired direction and press the button once again.
Swing mode selection method (for CK-E model)
• Press SWING ( )button for 4 seconds to enter Àeld setting mode. While in Àeld
setting mode, it will only show SWING MODE ( ).
• Press temperature
and button to select SWING MODE ( )rotation from
Swing Mode 1 to Swing Mode 3.
• There are 3 different SWING MODE, which are:
Swing mode 1 Swing mode 2 Swing mode 3
SWING MODE will not activate unless SWING is activated.
Swing is indicated by the logo:
• If no mode changes within 4 seconds, unit will operate according to the selected
SWING MODE ( ).
7. Turbo function (model dependent)
• Press
for fast cooling or heating operation.
• Fan speed turn to maximum speed.
• Press again to deactivate the function.
• Available under HEAT and COOL modes only.
• Any change of fan speed will deactivate this function.
• The Turbo function ( ) is unavailable for chilled water system and remote control
with SWING MODE ()function.
Original Instruction
OM-EN-GS02-0211(0)-Daikin (saso)Sec1:1 Sec1:1 6/10/11 8:40:33 AM

2
+2 C
+1 C
- 1 C
- 2 C
0 0.5 1 1.5 2
- 3 C
8. OFF timer setting
• Press the OFF TIMER button will activate the off timer function.
• Set the desired off time by pressing the OFF TIMER button continuously.
• Press the CANCEL button to cancel the off timer setting.
9. Quiet function (model dependant)
• Press
for quiet operation.
• Fan speed turn to minimum speed.
• Press again to deactivate the function.
• Any change of fan speed will deactivate this function.
• The Silent function ( ) is unavailable for chilled water system.
10. Clock time setting
• Press and hold button to set the clock time.
11. ON timer setting
• Press the ON TIMER button will activate the on timer function.
• Set the desired on time by pressing the ON TIMER button continuously. If the
timer is set to 7.30am, the air conditioner will turn on at 7.30am sharp.
• Press the CANCEL button to cancel the on timer setting.
12. Sleep mode setting
• Press the
button will activate the sleep mode function.
• This is an energy saving option. When the
unit is operating under cooling mode, the set
temperature is increased by 0.5°C after the Àrst
half an hour, another 0.5°C after the second half
an hour and 1°C after the following 1 hour.
• When the unit is operating under heating
mode, the set temperature is decreased by
1°C after the Àrst half an hour, another 1°C
after the second half an hour and 1°C after the
following 1 hour.
• This function is available under COOL,
HEAT and AUTO mode.
13. Temperature setting
• To set the desired room temperature, press the or button to increase or decrease
the set temperature.
• The temperature setting range is from 16°C to 30°C (Optional setting 20°C to
30°C).
• Press both buttons and simultaneously to toggle from °C to °F setting.
OM-EN-GS02-0211(0)-Daikin (saso)Sec1:2 Sec1:2 6/10/11 8:40:34 AM

MEMO
OM-EN-GS02-0211(0)-Daikin (saso)Sec1:3 Sec1:3 6/10/11 8:40:34 AM