Danby Premiere DPA120DHB1GP User manual

• Owner’s Use and Care Guide
• Guide d’utilisation et soins de Propriètaire
Model • Modèle DPA120DHB1GP
AIR CONDITIONER
Owner’s Use and Care Guide.............1-12
• Welcome
• Important Safety Information
• Features
• Installation
• Operation Instructions
• Care and Maintenance
• Troubleshooting
• Warranty
CLIMATISEUR
Guide d'utilisation et d'entretien .......13-24
• Bienvenue
• Consignes de Sécurité Importantes
• Caractéristiques
• Installation
• Consignes d’utilisation
• Soins et Entretien
• Dépannage
• Garantie
CAUTION:
PRECAUTION:
Read and follow all safety rules and operat-
ing instructions before first use of this prod-
uct.
Veuillez lire attentivement les consignes de
sécurité et les instructions d’utilisation avant
l’utilisation initiale de ce produit.
ENGLISH
FRANÇAIS
USER’S MANUAL
FOR YOUR SAFETY: Read these instructions carefully before operating the unit.
POUR VOTRE SÉCURITÉ: Lire attentivement ces instructions avant d'utiliser l'appareil.
V2.11.10.DM

Thank you for choosing a Danby appliance to provide you and your family with all of the “Home
Comfort” requirements of your home, cottage, or office. This Owner’s Use and Care Guide will
provide you with valuable information necessary for the proper care and maintenance of your new
appliance. If properly maintained, your Danby appliance will give you many years of trouble free
operation. Please take a few moments to read the instructions thoroughly and familiarize yourself
with all of the operational aspects of this appliance.
Your Danby Portable Air-Conditioner is a multi-functional room air-exchanging, air-processing
appliance, designed to offer you the functions of; Air Conditioning, Dehumidifying, and Independent
Fan. Each individual mode is featured with “oscillating” air swing capabilities. This unit can be
conveniently moved from room to room within your home and set up in just minutes. Imagine the
convenience of 4 Season Home Comfort at your fingertips, anywhere, anytime.
For easy reference, may we suggest you attach a copy of your sales slip/receipt to this page, along
with the following information, located on the manufacturers nameplate on the rear panel of the unit.
Model Number:
Serial Number:
Date of Purchase:
This information will be necessary if your unit requires servicing and/or for general inquiries. To contact a
Customer Service Representative, call Danby TOLL FREE: 1-800-26- (1-800-263-2629)
WELCOME
1

READ ALL SAFETY INFORMATION BEFORE USING
1) Check available power supply and resolve any wiring problems
BEFORE installation and operation of this unit. All wiring must
comply with local and national electrical codes and be installed by
a qualified electrician. If you have any questions regarding the
following instructions, contact a qualified electrician.
2) This appliance draws 11.7 amps under Cooling Modeand may
be used in any properly wired, general purpose 15 amp
household grounded receptacle.
3) For your safety and protection, this unit is grounded through the
power cord plug when plugged into a matching wall outlet. If you
are not sure whether the wall outlets in your home are properly
grounded, please consult a qualified electrician.
WARNING: Improper connection of the grounding plug can
result in risk of Fire, Electric Shock, and/or injury to Persons
associated with the appliance. Check with a qualified service
representative if in doubt that the appliance is proplery grounded.
4) DO NOT USE PLUG ADAPTERS OR EXTENSION CORDS
WITH THIS UNIT. If it is necessary to use an extension cord with
this unit, use an approved “air conditioner” extension cord only
(available at most local hardware stores).
5) To avoid the possibility of personal injury, always disconnect the
power supply to the unit before installing and/or servicing.
TABLE 1
Suggested Individual Branch Circuit
Nameplate Amps *AWG Wire Size
11.7 14
AWG- American Wire Gauge
*Based on copper wire at 60°C temperature rating.
TABLE 2
Receptacle and Fuse Types
521stloVdetaR
51spmA
Wall Outlet
51eziSesuF
Time Delay Fuse Plug Type
(or Circuit Breaker)
IMPORTANT SAFETY INFORMATION
ELECTRICAL
SPECIFICATIONS
CAUTION: Do not leave this unit
unattended in a space where people or
animals cannot react to a failed unit are
located. A failed unit can cause extreme
overheating or death in such an enclosed,
unattended space.
2
The power cord supplied with this air conditioner contains a device that senses damage to
the power cord. To test if your power cord is working properly, you must do the following:
1) Connect the power supply cord to an electrical
outlet.
2) The power supply cord has two buttons located on
the head of the plug. One button is marked
“TEST”, and the other is marked “RESET”. Press
the “TEST” button; you will hear a click as the
“RESET” button pops out.
3) Press the “RESET” button; you will hear a click
as the button engages.
4) The power supply cord is now energized and
supplying electricity to the air conditioner (on
some products this is also indicated by a light on
the plug head).
NOTE: The power cord supplied with this air
conditioner contains a current leakage detection
device designed to reduce the risk of fire. In the event
the power supply cord is damaged, it cannot be
repaired and must be replaced with a new cord from
the product manufacturer.
•Under no circumstances should this device be used
to turn the unit on or off.
•The “RESET” button must always be pushed in
(engaged) for correct operation.
•The power supply cord must be replaced if it fails to
reset when the “TEST” button is pushed in.
POWER
SUPPLY CORD

SAFETY
PRECAUTIONS
To prevent injury to the user and other people, and to prevent property damage, the
following instructions must be followed. incorrect operation due to ignoring these
instructions may cause harm or damage.
ALWAYS DO THE FOLLOW:
• This unit should be used in such a way that it is protected from moisture; for example, condensation,
splashed water, etc. Do not place or store the unit where it can fall or come into contact with water or other
liquids.
• Always transport the unit in its upright position, and stand it on a stable, level surface during use.
• Always use the switch on the control panel to start or stop the unit.
• Turn off the unit when it is not in use.
• Always contact a qualified service technician to carry out repairs.
• Keep at least 30cm (1 foot) of free space around the unit (e.g. from walls, furniture, etc.) to allow for proper
air circulation.
NEVER DO THE FOLLOWING
• Do not operate your air conditioner in a wet room, such as a bathroom or laundry room.
• Do not touch the unit with wet or damp hands or when barefoot (i.e. without socks on).
• Do not press the buttons on the control panel with anything other than your fingers.
• Do not remove any fixed covers. Never use this appliance if it is not working properly or if it has been
dropped or damaged.
• Do not cover or obstruct the inlet or outlet grills.
• Do not use hazardous chemicals to clean, or allow them to come in contact with, the unit. Do not use the
unit in the presence of flammable substances such as alcohol, insecticides, gas, petrol, etc.
• Do not allow unsupervised operation of the unit by children
• Do not use this product for functions other than those described in this manual.
Your Danby appliance is designed to be highly efficient in energy savings. Follow these
recommendations for greater efficiency.
1) Select a thermostat setting that suits your comfort
needs and leave at that chosen setting.
2) The air filter is very efficient in removing
airborne particles. Keep the air filter clean at all
times.
3) Use drapes, curtains or shades to keep direct
sunlight from penetrating and heating room, but do
not allow drapes or curtains to obstruct the air flow
around the unit.
4) Start your air conditioner before the outdoor air
becomes hot and uncomfortable, to avoid an initial
period of discomfort while the unit is cooling off
the room. Use of the automatic start/stop
programmable TIMER feature can be a major asset
in this regard if utilized to the fullest extent.
5) When outdoor temperatures are cool enough, turn
the air conditioner off and use the FAN MODE.
This circulates indoor air, providing some cooling
comfort while utilizing less electricity.
IMPORTANT SAFETY INFORMATION (cont’d)
ENERGY-SAVING
TIPS
3

FEATURES
Check to ensure that all accessories are included in the package (Fig. A).
ytitnauQnoitpircseD
1) Intake / Exhaust Hose (with collars) 2 / set
2)
3)
Window Intake / Exhaust Adapter B 2 / set
4)
5)
tes/1tiKredilSoitaP/wodniW
from 72cm (28-6/16in.) up to 203cm ( 79-15/16in.)
6)
scp3laeSmaoF
cp1lortnoCetomeR
tes/1seirettaB
FRONT
1) Control Panel.
2) Louver Adjustment Handle.
3) Vertical Louver Blades.
4) Horizontal Louver Blades.
5) Carrying Handles (both sides).
6) Castors (4).
REAR
1) Air Filter.
2) Air Inlet.
3) Air Outlet.
4) Upper Drain Outlet.
5) Vent Control.
6) Power Cord Hooks.
7) Lower Drain Outlet.
INSTALLATION INSTRUCTIONS
ACCESSORIES
4
1
2
3
4
5
6
CLOSE
OPEN
1
23
4
5
6
7
1
2
3
4
5
6
Fig. A

LOCATION •The air conditioner should be placed on a firm foundation to
minimize noise and vibration. For safe and secure positioning,
place the unit on a smooth, level floor that is strong enough to
support the unit.
•The unit has castors to aid placement, but if should only be rolled
on smooth, flat surfaces. Use caution when rolling on carpet
surfaces. Do not attempt to roll the unit over any objects.
•Never place any obstacles around the air inlet or outlet of the
unit.
•Give at least 30 cm (1 ft) of free space between the wall and the
unit to allow for efficient air-conditioning.
WINDOW KIT
INSTALLATION
The window kit has been designed to fit most standard “vertical” and “horizontal” window applications;
however, it may be necessary to improvise or modify some aspects of the installation procedures for unique
window types.
Horizontal Windows: Minimum & Maximum Vertical Windows: Minimum & Maximum
NOTE: If the window opening is less than the stated minimum length of the window slider kit, cut the
exhaust slider (the one with the oval shaped hole) shorter in order to fit it to the window. If you are going to
cut, do not compromise the integrity (shape) of the factory cut hole in the slider, as this would make proper
ventilation impossible.
INSTALLATION INSTRUCTIONS
5
Horizontal / Vertical Window Installation
1) Select a suitable location, making sure you have access to an electrical outlet.
2) Install the intake / exhaust hoses to the rear of the unit (Accessories #1) as shown in Fig. A, page 4 .
3) Install the window slider kit (Accessories #3) as shown in Fig. B or Fig. C depending on window type.
4) Attach the two intake / exhaust hose adapters (Accessories #2) to the end of each hose.
5) Attach the intake / exhaust adapters to the holes in the window kit, making sure the window kit is securely
in place.
NOTE: For vertical window installation, ensure that the exhaust hose adapter is above the intake hose adapter
(to prevent the unit from taking in hot exhaust air).
6) Plug power cord into a 115 V / 60 Hz grounded electrical outlet.
30cm/
1 ft
30cm/
1 ft
Horizontal
window
Window Slider Kit:
Min: 72.0cm (2.36ft)
Max: 203cm (6.66ft)
Fig. B
Vertical
window
Window Slider Kit:
Min: 72.0cm (2.36ft)
Max: 203cm (6.66ft) Fig. C

PATIO KIT
INSTALLATION
The patio kit has been designed to fit most standard patio doors. Please note that when the patio kit is installed,
the patio door will require a locking bar or other security mechanisms; the patio door cannot be locked
when the patio kit is installed.
Patio door: Minimum & Maximum
Patio
door
Patio Slider Kit:
Min: 72cm (2.36ft)
Max: 203cm (6.66ft)
NOTE: The patio slider is a slider accompanying the window
kit, that has a series of factory cut holes along its sides: use
these holes to screw the patio slider kit securely into position,
as depicted in Fig. 3.
Fig. 3
Patio Door Installation
Refer to Fig. 3 while following the below instructions:
1) Select a suitable location, making sure you have access to an electrical outlet.
2) Install the intake / exhaust hoses to the rear of the unit (Accessories #1)as shown in Fig. A, page 4.
3) Install the window slider kit (Accessories #3).
4) Attach the two intake / exhaust hose adapters (Accessories #2) to the end of each hose.
5) Attach the intake / exhaust adapters to the holes in the patio door kit, making sure the patio door kit is
securely in place.
NOTE: Ensure that the exhaust hose adapter is above the intake hose adapter (to prevent the unit from taking
in hot exhaust air).
6) Plug power cord into a 115 V / 60 Hz grounded electrical outlet.
INSTALLATION INSTRUCTIONS (cont’d)
6

TEMP
MODE
ION
OPERATING INSTRUCTIONS
CONTROL
PANEL
FC
1
5
3
4
FEATURES
Left Side:
1) Display Window: Shows the set temperature (in °C or °F) and the
Auto-timer settings.
2) Timer On (left) & Timer Off (right) indicators.
3) Remote receiver.
4) Timer On (left) & Timer Off (right) buttons: Press the Timer On
button to initiate the Auto-On program, or the Timer Off button to
initiate the Auto-Off program, and is also used to make
adjustments to the Auto-On and Auto-Off timer settings.
5) °F (left) / °C (right) indicators: Indicates which scale of
temperature is being shown in the display window.
Right Side:
1) Temp. Increase (top), Temp. Decrease (bottom) buttons: Press
to increase or decrease the set temperature by one degree.
2) Mode Indicators: Indicates which operation has been selected.
From left to right: Cool, Dry, Fan, or Heat.
3) Mode Selection Button: Pressing rotates through the available
operations.
4) Ionizer Indicator: Press the Fan Speed button continuously for
Ionizer Indicator:(3 seconds) when lit the ionizer is energized
and operational.
5) Power Supply Indicator: When lit, the machine is recieving
power; if blank, the machine is not receiving power.
6) Fan Speed Indicators: Indicate which fan speed is in use.
Options are between High, Medium, or Low fan speed (varies
between operations).
7) Fan Speed Selection Button: Pressing alternates between
available fan speeds (some operations only).
8) Power On Off Button: Pressing activates or deactivates
operation of the machine.
DIRECT DRAIN Before proceeding with dry mode (on following page), it is required that you set up a
direct drain for the unit.
To direct drain the unit:
1) Stop, unplug and then locate the unit near
a floor drain.
2) Connect a standard garden hose to the
upper drain outlet (for location see Part
Identification: Rear # 4).
3) Place the open end of the hose over a
floor drain.
4) Reconnect power to the unit.
Draining the Unit:
1) Stop, unplug and then locate the unit near
a floor drain (if available; if not see
below note).
2) Place the open end of a garden hose over
the floor drain.
3) Remove the lower drain outlet plug (for
location, see Part Identification: Rear # 7)
and quickly connect a garden hose to the
lower drain outlet.
NOTE: If a floor drain is unavailable, turn the unit off and place a pot or pan directly beneath the
lower drain outlet and then remove the lower drain outlet’s plug (this will cause any stored water to exit
the drain outlet). Do not leave the unit unattended while it is draining in case the pot or pan fills and
needs to be replaced.
2
123 4 5
6 7 8
7
Note: To disconnect power completely, the
power cord must be removed after
deactivating the machine.

REMOTE CONTROL
PART IDENTIFICATION:
1) Display Window: Shows the set
temperature (in °C or °F) and the
Auto-timer settings.
2) Temp. Increase: Press to increase
the set temperature by one degree.
3) Temp. Decrease: Press to decrease
the set temperature by one degree.
4) Mode selection button: Pressing
rotates through the available
operations.
5) Fan Speed Selection button:
Pressing alternates between available
fan speeds (some operations only).
6) Reset: When pressed in, all settings
are cancelled and the control returns
to its default (factory) settings.
7) Lock: When pressed in, all current
settings become locked in (cannot be
adjusted) until the lock button is
pressed again.
8) Timer Off: Press the Timer Off
button to initiate the Auto-Off
program. Also used to adjust the
Auto-Off timer settings.
9) Timer On: Press the Timer On
button to initiate the Auto-On
program. Also used to adjust the
Auto-On and Auto-Off timer settings.
10) Power On Off button: Pressing
activates or deactivates operation of
the machine.
NOTE: To disconnect power
completely, the power cord must be
removed after deactivating the machine.
1
2
3
4 5
6
7
REMOTE DISPLAY WINDOW:
1) Digital Display Area: Shows the set temperature (in °C or °F). When
the Auto-timer is being programmed, the display also shows the Auto-
timer settings.
2) Transmission Indicator: This indicator flashes when the remote
signals the unit.
3) Mode Display: Indicates which operation is currently selected.
4) Lock Display: This indicator appears when the remote control has
been locked.
1
2
3
4
5
67
8
9
10
5) Timer Display: If the Auto-On or Auto-Off operations have been activated,
the words “TIMER ON’,TIMER OFF’, or “TIMER ON OFF” appear in this area.
NOTE: To disconnect power completely, the power cord must be unplugged after deactivating the machine.
REMOTE OPERATING INSTRUCTIONS: Operations work the same way with the remote control buttons
as they do when using the unit’s control panel (refer to Operating Instructions for more details).
WARNING: Keep the remote control away from all liquids.
Important Notes on the Remote Control:
•Be sure there are no barriers between the remote control and the receiver (signal interceptor) on the unit’s
control panel.
•Protect the remote control from high temperatures, and keep it away from radiation exposure.
•Keep the control panel receiver out of direct sunlight.
•Keep the remote control away from Electro-Magnetic-Interference (EMI) generated by other household
appliances.
9
•Do not mix old and new batteries.
•Do not mix alkaline,standard (carbon-zinc), or rechargeable (ni-cad,ni-mh,etc) batteries.
•To operate the hand held remote control you will require two “AAA” Alkaline batteries (included).
•Insert (2) batteries (AAA) following the same orientation (polarity) depicted inside the battery chamber (+ / -).
•This Class B digital apparatus complies with canadian ICES-003.
7) ON/OFF Display: This indicator appears when the unit is operating
6) Fan Display: Indicates 1) when the fan mode is in use, and 2) fan speed.