Dancover TentZing CT168300 User manual

18-10-2022
Manual
for
Inflatable Tent
TentZing

Inflatable Tent Instruction Guide
Hello, thanks for purchasing our Inflatable Tent!
Here is a golden rule to help you get years of use out of your tent:
ALWAYS, WITHOUT FAIL, STORE YOUR TENT BONE DRY OR
YOU WILL RUN THE RISK OF GETTING A MOULDY TENT!
Content List
Inflatable Tent
THE CONTENTS SHOULD BE AS FOLLOWS:
1 x Carrybag
1 x Canvas Tent
1 x Electric inflator pump
12 x Pin Pegs
8 x Guy Ropes & Sliders
1x Repair Patch

1. Unpack your tent and lay it out with the groundsheet floor facing. Make sure
the ground is flat and free of any sharp objects. Find the door and rotate to face
desired direction.
2. Keeping the tent fabric on top of the base, stretch the groundsheet. Locate
the elastic rings and use the smaller pegs to fix your base to the ground.

3. Locate the valves to inflate the tent.
4. Insert the pump nozzle into the valve and start pumping. 2/3 into the
inflation process you will need to manually push the tent roof upwards to help
air flow through the tubes evenly.

5. The first time you use the tent you will have to attach the guy ropes to the
canvas loops at the bottom end of the roof. After this they can be left attached
in place for your next trip.
6. Take the larger ridged pegs and peg out the tent ropes. Tension of the rope
should be equal and not over tight. Once you have completed all guy ropes
you can adjust to suit.
Enjoy your inflatable tent and remember please only store it bone dry.
Many thanks and feel free to call us if you get stuck.

For more information please visit: www.dancovershop.com
Contact information
Austria Belgium Croatia Denmark
Estonia Finland France Germany
Ireland Italy Latvia Lithuania
Nederland Norway Poland Portugal
Spain Sweden Switzerland UK