Dancover GH18001 User manual

13-12-2019
for
Winter Protection Plant Tent
2,5x2,5x2m
Manual

1 1
182
3
4
5
6
7
6
30
1
1
6
Part no. Reference Image Quantity
Part List
13-12-2019

Insert six of the pipe (2) into the 6-way connector (1) until you hear them click.
Extend these with the 12 remaining pipes (2).
Step 1:
Step 2:

Step 3:
Insert the forth leg (2) and pull the cover back in place over the frame. The center
of the outer cover should be positioned directly above the 6-way connector (1).
Step 4:
Spread out the outer cover and groundsheet. Insert the legs (2) through the holes
in the groundsheet from above on three out of the six legs (2) and pull the outer
cover over the frame as much as possible.

outer cover on the pipes.Use the Velcro to attach the
Step 5:
Step 6: Use the Velcro to attach the inner cover on the pipes. Use the strap to tie the
inner cover to the 6-way connector (1).

Then anchor the feet (3) in the ground using the tent pegs (4). Use three pegs
per foot.
Step 8:
Step 7: Insert the feet (3) into legs (2). The hook must be facing out.

Step 9: Use the ropes on the corners to give the tent extra tension.

Contact information
Head office:
Dancover A/S
Nordre Strandvej 119 G
3150 Hellebæk
Denmark
For more information
please visit:
www.dancovershop.com
National contact
Denmark: 70 26 76 20
[e-mail]
UK: 020 8099 7570
[e-mail]
Spain: 911 436 828
[e-mail]
Italy: 02 479 21 198
[e-mail]
Germany: 041 0266 7040
[e-mail]
Switzerland: 0840 000125
[e-mail]
France: 0975 181 800
[e-mail]
Austria: 0662 626935
[e-mail]
Sweden: 040 233 262
[e-mail]
Finland: 0 931 581 720
[e-mail]
Nederland: 0 858 880 524
[e-mail]
Poland: 22 300 8602
[e-mail]
Ireland: 0 151 33 003
[e-mail]
Luxembourg: [phone]
[e-mail]
Portugal: 308 800 899
[e-mail]
Belgium: 0 28 08 08 09
[e-mail]
Norway: 231 00 690
[e-mail]