Dancover Multipavillon 6x6m User manual

18-02-2016
Manual
for
Marquee
Multipavillon
6x6m

Each package must contain
No.
1
No.
2
No.
3
No.
4
No.
5
No.
6
No.
7
No.
8
No.
9
No.
10
No.
11
No.
12
12
pcs.
16
pcs.
8
pcs.
12
pcs.
16
pcs.
20
pcs.
1
pcs.
12
pcs.
8
pcs.
4
pcs.
4
pcs.
4
pcs.
It is easy to assemble
your marquee
Multipavillon
ASSEMBLY INSTRUCTION

Each marquee consists of
No. 1 Base
No. 2 Entrance tube
No. 3 Small horizontal tube
No. 4 Small corner tube
No. 5 Cross tting
No. 6 Small top tube
No. 7 Top tting
No. 8 Ground pegs
No. 9 Large top tube
No. 10 Large corner tube
No. 11 Small curved tube
No. 12 Large horizontal tube

Place the 12 corner bases (1) as shown on
drawing so they form a frame measuring 6x6 m.
If the marquee is mounted outside use ground
pegs (8) inserted into the ground with a hammer.
If the marquee is mounted on a concrete or
wooden oor, the corner base can be fastened
with concrete nails or screws.
Fasten only one corner until the entire frame has
been assembled in order to ensure that the other
corner bases are placed correctly within the
square.
4
22
1
4
2
3 5
1
8
Place the longest tubes (2) in the 2 outermost
holes in each corner base and the shorter tube (4)
in the middle hole.
Mount the tubes so the snap-and-click features
points upwards.
Mount the tubes (2) in (3) for a complete arch.
Mount the connector (5) with the middle tube
(4). Mount the horizontal tubes (3) with the
connectors (5) to make a ring.
Assemble and mount the top section consisting
of (9) and (7).
Now you can fasten the remaining corner bases
if necessary.
Finally, mount to cover onto the frame. Fasten
the 4 straps at the ends of the cover to the 4
corner bases.