Danfoss VLT LCP 11 User manual

IP55 rated remote mounting kit for mounting of VLT
p
Control
Panel of type LCP 11, LCP 12 and LCP 21.
Items supplied
•
Sealing gasket
•
Mounting bracket
•
Mounting screws
•
Cable (3 m)
Mounting
1. Fit the sealing gasket on the LCP.
Illustration 1.1 Example: Gasket on LCP
2. Cut out section of panel and locate the LCP in the
cut-out.
Illustration 1.2 Dimensions
1Panelcutout
Panel thickness: 1-3 mm
Table 1.1 Legend to Illustration 1.2
Illustration 1.3 Example: LCP on Mounting Plate
1Mountingplate
2Gasket
3LCP
Table 1.2 Legend to Illustration 1.3
3. Slide the mounting bracket into place on the
backside of the LCP and fasten it with screws.
Illustration 1.4 Mounting Bracket on LCP
Installation Instructions
VLT
p
LCP Remote Mounting Kit
MI02C202 - VLTpis a registered Danfoss trademark
1

4. Connect the cable to LCP and fasten it with the
provided thread cutting screws. Tightening torque
1.3 Nm.
Illustration 1.5 Cable Fastening
*MI02C202*
MI02C202132R0010 Rev. 2013-01-24