Danfoss 101N0715 User manual

MAKING MODERN LIVING POSSIBLE
BD Controller 101N07xx Series 24 V DC
with Tool4Cool® LabEdition software and
Danfoss One Wire/LIN gateway
Quick Start Guide

Quick Start Guide BD Controller 101N07xx Series 24 V DC

Quick Start Guide BD Controller 101N07xx Series 24 V DC
3
DEHC.PS.100.J1.02
Quick Start Guide 1. Checklist ..........................................................................................................................4
2. Connect cables ..............................................................................................................5
3. Install software ..............................................................................................................6
4. Install product key .......................................................................................................8
5. Connect network ..........................................................................................................9
6. Ready to operate ....................................................................................................... 11
7. Ordering ....................................................................................................................... 12
8. Further information .................................................................................................. 13

Quick Start Guide BD Controller 101N07xx Series 24 V DC
4DEHC.PS.100.J1.02
1. Checklist
Check that you have the following:
BD electronic controller
101N07xx Series 48V DC
101N0715 or•
101N0710 (discontinued)•
Tool4Cool® LabEdition software
installation CD
NTC temperature sensor
(alternative: mechanical thermostat)
DC line cords
Product key for BD compressor controller
(not necessary with Tool4Cool® Version 1.02) DH3TT6RBAD1GW8G68ZM1N8G62ZMCOO916IER6GH2YZEIR
Danfoss One Wire/LIN gateway with
connection cables
Gateway•
One Wire/LIN gateway•
Communication cable
USB port connector to PC•
USB 2.0 A/B cable•
Ordering: See section 7.0

Quick Start Guide BD Controller 101N07xx Series 24 V DC
5
DEHC.PS.100.J1.02
2. Connect cables
8633
Main switch
Fuse
Power supply
Fan
-
+
Fan
-
+
NTC resistor
– t°
option 1option 2
optional
optional
mech. Thermostat
One Wire
LIN Gateway
Te rminal plug
USB
(only for supply)
COM
USB Danfoss One Wire
LIN GatewayOneWire
/ LIN
USB Code no.: 105N9501
RS232/485
USB 2.0
Electronics
(One Wire / LIN)
RS232
RS485
Tx Rx
option 2
option 1
USB 2.0 A/B Cable
COM port connector to PC
NTC temperature sensor
Electronic Unit
One Wire/LIN Gateway Communication Cable
USB port connector to PC
USB port connector to PC
Gateway
Power supply cableSerial RS232 Cable with USB Voltage Supply

Quick Start Guide BD Controller 101N07xx Series 24 V DC
6DEHC.PS.100.J1.02
3. Install software
1. Check that you have the latest update of .NET Framework from www.windowsupdate.com.
2. Insert the Tool4Cool® installation CD.
This view will appear:

Quick Start Guide BD Controller 101N07xx Series 24 V DC
7
DEHC.PS.100.J1.02
3. Double-click on Tool4Cool® Software Installation. Run the file setup.exe. Then follow the instructions
in the Setup Wizard.
12
34
5

Quick Start Guide BD Controller 101N07xx Series 24 V DC
8DEHC.PS.100.J1.02
4. Install Product Key
1. Start Tool4Cool® LabEditon by double clicking on the icon on the desktop:
2. Select Help in the menu bar.
3. Select Product Keys from the drop-down menu:
4. This dialog box will open:
In the Add Product Key field, type the Product Key shown in Section 1: Checklist.
Click on the Add Key button. The Product Key is now active.

Quick Start Guide BD Controller 101N07xx Series 24 V DC
9
DEHC.PS.100.J1.02
5. Connect network
1. Select File in the menu bar.
2. Select Connect Network in the drop-down menu:
3. This dialog box will open:

Quick Start Guide BD Controller 101N07xx Series 24 V DC
10 DEHC.PS.100.J1.02
In the Connect using field, select the COM port to which the gateway is connected.
Fill in Description (optional).
Press OK.
Wait a short time. The LEDs on the gateway will flicker, then a red arrow will appear in front of the
description (COM/USB network).
The controller is now accessible via Tool4Cool®.