Danfoss VACON NX FI6 User manual

Operating Guide
VACON® NX Inverters FI4-FI8

Contents
1 Introduction 8
1.1 Purpose of this Operating Guide 8
1.2 Additional Resources 8
1.3 Disposal 8
1.4 Type Approvals and Certifications 8
1.5 Start up Quick Guide 9
2 Safety 11
2.1 Safety Symbols 11
2.2 Danger and Warnings 11
2.3 Cautions and Notices 13
3 Product Overview 15
3.1 Introduction 15
3.2 Intended Use 16
3.3 Manual Version 16
3.4 Standard Features of VACON NX Inverters 17
3.5 Package Label 17
3.6 Description of the Type Code 18
3.7 Enclosure Sizes 20
3.8 Available Protection Ratings 21
3.9 Available EMC Classes 22
3.10 Control Panel 22
3.10.1 Keypad 22
3.10.2 Display 23
3.10.3 Basic Menu Structure 24
4 Receiving the Delivery 26
4.1 Checking the Delivery 26
4.2 Storing the Product 28
4.3 Lifting the Product 28
4.4 Using the Product Modified Label 28
5 Mounting the Unit 30
5.1 Environmental Requirements 30
5.1.1 General Environmental Requirements 30
5.1.2 Ambient Temperature and Derating 30
5.1.3 High Altitude Installation 31
5.2 Cooling Requirements 32
5.2.1 General Cooling Requirements 32
Contents
Operating Guide | VACON® NX Inverters FI4-FI8
AQ299433367205en-000101 / | 3Danfoss A/S © 2019.07

5.2.2 Cooling of FI4 to FI8 32
5.3 Installation Sequence for Wall-mounted AC Drives 34
6 Electrical Installation 36
6.1 Cable Connections 36
6.1.1 General Cable Requirements 37
6.1.2 UL Standards on Cabling 37
6.1.3 Cable Selection and Dimensioning 37
6.1.4 Cable Selection and Dimensioning, North America 37
6.1.5 Fuse Selection 38
6.2 Grounding 38
6.3 EMC-compliant Installation 39
6.4 Get Access and Locate the Terminals 40
6.4.1 Get Access and Locate the Terminals for FR4/FI4 40
6.4.2 Get Access and Locate the Terminals for FR6/FI6 42
6.4.3 Get Access and Locate the Terminals for FR7/FI7 44
6.4.4 Get Access and Locate the Terminals for FR8/FI8 46
6.5 Installing the Cables 48
6.5.1 Additional Instructions for Cable Installation 49
6.5.2 Installing the Cables, FR4-FR6/FI4-FI6 49
6.5.3 Installing the Cables, FR7/FI7 52
6.5.4 Installing the Cables, FR8/FI8 55
7 Control Unit 59
7.1 Control Unit Components 59
7.2 Control Voltage (+24 V/EXT +24 V) 59
7.3 Control Unit Cabling 60
7.3.1 Selection of the Control Cables 60
7.3.2 Control Terminals on OPTA1 61
7.3.2.1 Digital Input Signal Inversions 62
7.3.2.2 Jumper Selections on the OPTA1 Basic Board 63
7.3.3 Control Terminals on OPTA2 and OPTA3 64
7.4 Installation of Option Boards 66
7.5 Galvanic Isolation Barriers 66
8 Using the Control Panel 68
8.1 Navigating on the Control Panel 68
8.2 Using the Monitoring Menu (M1) 68
8.2.1 Monitored Values 69
8.3 Using the Parameter Menu (M2) 70
8.3.1 Finding the Parameter 70
8.3.2 Selecting Values 71
8.3.3 Editing the Values Digit by Digit 72
Contents
Operating Guide | VACON® NX Inverters FI4-FI8
AQ299433367205en-000101 /4 | Danfoss A/S © 2019.07

8.4 Using the Keypad Control Menu 73
8.4.1 Finding the Keypad Control Menu 73
8.4.2 Keypad Control Parameters M3 74
8.4.3 Changing the Control Mode 74
8.4.4 Changing the Rotation Direction 75
8.4.5 Disabling the Stop Motor Function 75
8.4.6 Special Functions in Keypad Control Menu 76
8.4.6.1 Selecting the Keypad as the Control Mode 76
8.4.6.2 Copying the Frequency Reference Set to the Control Panel 76
8.5 Using the Active Faults Menu (M4) 76
8.5.1 Finding the Active Faults Menu 76
8.5.2 Examining the Fault Time Data Record 77
8.5.3 Fault Time Data Record 77
8.6 Using the Fault History Menu (M5) 78
8.6.1 Fault History Menu (M5) 78
8.6.2 Resetting the Fault History 79
8.7 Using the System Menu (M6) 79
8.7.1 Finding the System Menu 79
8.7.2 System Menu Functions 79
8.7.3 Changing the Language 82
8.7.4 Changing the Application 82
8.7.5 Copy Parameters (S6.3) 83
8.7.5.1 Saving Parameter Sets (Parameter Sets S6.3.1) 83
8.7.5.2 Uploading Parameters to Control Panel (Up To Keypad, S6.3.2) 84
8.7.5.3 Downloading Parameters to Drive (Down From Keypad, S6.3.3) 84
8.7.5.4 Activating or Deactivating the Automatic Parameter Back-up (P6.3.4) 84
8.7.5.5 Comparing the Parameters 85
8.7.6 Security 86
8.7.6.1 Finding the Security Menu 86
8.7.6.2 Passwords 86
8.7.6.3 Setting a Password 86
8.7.6.4 Entering a Password 87
8.7.6.5 Deactivating the Password Function 87
8.7.6.6 Locking a Parameter 87
8.7.6.7 Start-up Wizard (P6.5.3) 88
8.7.6.8 Activating/Deactivating the Start-up Wizard 88
8.7.6.9 Enabling/Disabling the Change of Multimonitoring Items 88
8.7.7 Keypad Settings 89
8.7.7.1 Finding the Keypad Settings Menu 89
8.7.7.2 Changing the Default Page 89
8.7.7.3 Default Page in the Operating Menu (P6.6.2) 90
8.7.7.4 Setting the Timeout Time 90
Contents
Operating Guide | VACON® NX Inverters FI4-FI8
AQ299433367205en-000101 / | 5Danfoss A/S © 2019.07

8.7.7.5 Contrast Adjustment (P6.6.4) 90
8.7.7.6 Backlight Time (P6.6.5) 90
8.7.8 Hardware Settings 90
8.7.8.1 Finding the Hardware Setting Menu 90
8.7.8.2 Setting the Internal Brake Resistor Connection 91
8.7.8.3 Fan Control 91
8.7.8.4 Changing the Fan Control Settings 92
8.7.8.5 HMI Acknowledge Timeout (P6.7.3) 92
8.7.8.6 Changing the HMI Acknowledge Timeout 92
8.7.8.7 Changing the Number of Retries to Receive HMI Acknowledgement (P6.7.4) 93
8.7.8.8 Sine Filter (P6.7.5) 93
8.7.8.9 Pre-charge Mode (P6.7.6) 93
8.7.9 System Info 93
8.7.9.1 Finding the System Info Menu 93
8.7.9.2 Total Counters (S6.8.1) 93
8.7.9.3 Trip Counters (S6.8.2) 94
8.7.9.4 Resetting the Trip Counters 94
8.7.9.5 Software (S6.8.3) 94
8.7.9.6 Applications (S6.8.4) 95
8.7.9.7 Examining the Application Page 95
8.7.9.8 Hardware (S6.8.5) 95
8.7.9.9 Checking the Status of an Option Board 95
8.7.9.10 Debug Menu (S6.8.7) 96
8.8 Using the Expander Board Menu 96
8.8.1 Expander Board Menu 96
8.8.2 Examining the Connected Option Boards 96
8.8.3 Finding the Option Board Parameters 97
8.9 Further Control Panel Functions 97
9 Commissioning 98
9.1 Safety Checks before Starting the Commissioning 98
9.2 Commissioning the Inverter 99
9.3 Measuring the Cable and Motor Insulation 100
9.3.1 Insulation Checks of the Motor Cable 100
9.3.2 Insulation Checks of the DC Supply Cable 101
9.3.3 Insulation Checks of the Motor 101
9.4 Checks after Commissioning 101
9.4.1 Testing the Inverter after Commissioning 101
9.4.2 RUN Test without Load 102
9.4.3 Start-up Test 102
9.4.4 Motor Run Checklist 103
Contents
Operating Guide | VACON® NX Inverters FI4-FI8
AQ299433367205en-000101 /6 | Danfoss A/S © 2019.07

10 Maintenance 104
10.1 Maintenance Schedule 104
10.2 Reforming the Capacitors 104
11 Fault Tracing 106
11.1 General Information on Fault Tracing 106
11.2 Resetting a Fault 106
11.3 Creating Service Info File 107
12 Specifications 108
12.1 Weights of the Inverter 108
12.2 Dimensions 108
12.2.1 Dimensions for FI4–FI8 109
12.2.2 Dimensions for Flange Mounting, FI4–FI6 110
12.2.3 Dimensions for Flange Mounting, FI7–FI8 112
12.3 Cable and Fuse Sizes 114
12.3.1 Fuse Sizes for 465–800 V DC (380–500 V AC) 114
12.3.2 Fuse Sizes for 640–1100 V DC (525–690 V AC) 115
12.3.3 Cable Sizes for 465–800 V DC (380–500 V AC) 115
12.3.4 Cable Sizes for 640–1100 V DC (525–690 V AC) 116
12.4 Cable Stripping Lengths 116
12.5 Tightening Torques for Cover Screws 118
12.6 Tightening Torques of the Terminals 118
12.7 Power Ratings 118
12.7.1 Overload Capability 118
12.7.2 Power Ratings for 465–800 V DC (380–500 V AC) 120
12.7.3 Power Ratings for 640–1100 V DC (525–690 V AC) 120
12.8 Technical Data 121
12.9 DC Currents and DC Link Capacitance 124
12.9.1 DC Currents, Supply Voltage 465–800 V DC 125
12.9.2 DC Currents, Supply Voltage 640–1100 V DC 125
12.9.3 DC Link Capacitance 126
12.10 Faults and Alarms 126
Contents
Operating Guide | VACON® NX Inverters FI4-FI8
AQ299433367205en-000101 / | 7Danfoss A/S © 2019.07

1 Introduction
1.1 Purpose of this Operating Guide
This operating guide provides information for safe installation and commissioning of the AC drive. It is intended for use by qualified
personnel. Read and follow the instructions to use the drive safely and professionally. Pay particular attention to the safety instructions
and general warnings. Always keep this operating guide available with the drive.
1.2 Additional Resources
Other resources are available to understand advanced AC drive functions and programming.
• The VACON® NX All-in-One Application Manual provides greater detail on working with parameters and shows many application
examples.
• The VACON® NX I/O Boards User Manual gives more information on the I/O boards and their installation.
• Instructions for operation with option boards and other optional equipment.
Supplementary publications and manuals are available from Danfoss.
NOTE! Download the English and French product manuals with applicable safety, warning and caution information from https://
www.danfoss.com/en/service-and-support/.
REMARQUE Vous pouvez télécharger les versions anglaise et française des manuels produit contenant l'ensemble des informations
de sécurité, avertissements et mises en garde applicables sur le site https://www.danfoss.com/en/service-and-support/.
1.3 Disposal
Context:
Do not dispose of equipment containing electrical components together with domestic waste. Collect it separately in accordance with
local and currently valid legislation.
1.4 Type Approvals and Certifications
The following list is a selection of possible type approvals and certifications for Danfoss drives:
Introduction
Operating Guide | VACON® NX Inverters FI4-FI8
AQ299433367205en-000101 / DPD00908
8 | Danfoss A/S © 2019.07

089
NOTICE
The specific approvals and certification for the drive are on the nameplate of the drive. For more information, contact the local
Danfoss office or partner.
1.5 Start up Quick Guide
Context:
Do at minimum these procedures during the installation and commissioning.
If there are problems, speak to the local distributor.
VACON Ltd is not responsible for the use of the inverters against the instructions.
Introduction
Operating Guide | VACON® NX Inverters FI4-FI8
AQ299433367205en-000101 / DPD00908| 9
Danfoss A/S © 2019.07

Procedure
1. Check that the delivery agrees to the order, see 4.1 Checking the Delivery.
2. Before starting the commissioning, read carefully the safety instructions in 2.2 Danger and Warnings and 2.3 Cautions and Notices.
3. Before the mechanical installation, check the minimum clearances around the unit ( 5.2.2 Cooling of FI4 to FI8) and check the
ambient conditions in 12.8 Technical Data.
4. Check the dimensions of the motor cable, DC supply cable, mains fuses, and check the cable connections. Read 6.1 Cable
Connections, 6.3 EMC-compliant Installation, and 6.2 Grounding.
5. Obey the installation instructions, see 6.5 Installing the Cables.
6. Find information on the control connections in 7.3.2 Control Terminals on OPTA1.
7. If the start-up wizard is active, select the language of the control panel and the application. Accept the selections with the Enter
button. If the start-up wizard is not active, obey the instructions a and b.
ASelect the language of the control panel from the Menu M6, page 6.1. For instructions, see 8.7.3 Changing the Language.
BSelect the application from the Menu M6, page 6.2. For instructions, see 8.7.4 Changing the Application.
8. All parameters have factory default values. To make sure that the AC drive operates correctly, make sure that these group G2.1
parameters have the same data as the nameplate. For more information on the parameters in the list, see the VACON® All in One
Application Manual.
• Nominal voltage of the motor
• Nominal frequency of the motor
• Nominal speed of the motor
• Nominal current of the motor
• Motor cos phi
9. Obey the commissioning instructions, see 9.2 Commissioning the Inverter.
The VACON® NX Inverter is ready for operation.
Introduction
Operating Guide | VACON® NX Inverters FI4-FI8
AQ299433367205en-000101 / DPD00908
10 | Danfoss A/S © 2019.07

2 Safety
2.1 Safety Symbols
The following symbols are used in this manual:
DANGER
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE
Indicates information considered important, but not hazard-related (for example, messages relating to property damage).
2.2 Danger and Warnings
DANGER
SHOCK HAZARD FROM INVERTER POWER UNIT COMPONENTS
The inverter power unit components are live when the inverter is connected to DC supply. A contact with this voltage can lead
to death or serious injury.
-Do not touch the components of the power unit when the inverter is connected to DC supply. Before connecting the
inverter to DC supply, make sure that the covers of the inverter are closed.
DANGER
SHOCK HAZARD FROM INVERTER TERMINALS
The motor terminals U, V, W, the brake resistor terminals, or the DC terminals are live when the inverter is connected to DC
supply, also when the motor does not operate. A contact with this voltage can lead to death or serious injury.
-Do not touch the motor terminals U, V, W, the brake resistor terminals, or the DC terminals when the inverter is connected
to DC supply. Before connecting the inverter to DC supply, make sure that the covers of the inverter are closed.
Safety
Operating Guide | VACON® NX Inverters FI4-FI8
AQ299433367205en-000101 / DPD00908| 11
Danfoss A/S © 2019.07

DANGER
SHOCK HAZARD FROM DC LINK OR EXTERNAL SOURCE
The terminal connections and the components of the drive can be live 5 minutes after the inverter is disconnected from the DC
supply and the motor has stopped. Also the load side of the inverter can generate voltage. A contact with this voltage can lead
to death or serious injury.
-Before doing electrical work on the inverter:
• Disconnect the inverter from the DC supply and make sure that the motor has stopped.
• Lock out and tag out the power source to the inverter.
• Make sure that no external source generates unintended voltage during work.
• Wait 5 minutes before opening the cabinet door or the cover of the inverter.
• Use a measuring device to make sure that there is no voltage.
WARNING
SHOCK HAZARD FROM INVERTER CONTROL TERMINALS
The control terminals can have a dangerous voltage also when the drive is disconnected from DC supply. A contact with this
voltage can lead to injury.
-Make sure that there is no voltage in the control terminals before touching the control terminals.
WARNING
ACCIDENTAL MOTOR START
When there is a power-up, a power break, or a fault reset, the motor starts immediately if the start signal is active, unless the
pulse control for Start/Stop logic is selected. If the parameters, the applications or the software change, the I/O functions
(including the start inputs) can change. If you activate the auto reset function, the motor starts automatically after an automatic
fault reset. See the Application Guide. Failure to ensure that the motor, system, and any attached equipment are ready for start
can result in personal injury or equipment damage.
-Disconnect the motor from the drive if an accidental start can be dangerous. Make sure that the equipment is safe to
operate under any condition.
WARNING
LEAKAGE CURRENT HAZARD
Leakage currents exceed 3.5 mA. Failure to ground the drive properly can result in death or serious injury.
-Ensure the correct grounding of the equipment by a certified electrical installer.
WARNING
SHOCK HAZARD FROM PE CONDUCTOR
The drive can cause a DC current in the PE conductor. Failure to use a residual current-operated protective (RCD) device Type B
or a residual current-operated monitoring (RCM) device can lead to the RCD not providing the intended protection and
therefore can result in death or serious injury.
-Use a type B RCD or RCM device on the mains side of the drive.
Safety
Operating Guide | VACON® NX Inverters FI4-FI8
AQ299433367205en-000101 / DPD00908
12 | Danfoss A/S © 2019.07

2.3 Cautions and Notices
CAUTION
DAMAGE TO THE AC DRIVE FROM INCORRECT MEASUREMENTS
Doing measurements on the AC drive when it is connected to mains can damage the drive.
-Do not do measurements when the AC drive is connected to mains.
CAUTION
DAMAGE TO THE AC DRIVE FROM INCORRECT SPARE PARTS
Using spare parts that are not from the manufacturer can damage the drive.
-Do not use spare parts that are not from the manufacturer.
CAUTION
DAMAGE TO THE AC DRIVE FROM INSUFFICIENT GROUNDING
Not using a grounding conductor can damage the drive.
-Make sure that the AC drive is always with a grounding conductor that is connected to the grounding terminal that is
identified with the PE symbol.
CAUTION
CUT HAZARD FROM SHARP EDGES
There can be sharp edges in the AC drive that can cause cuts.
-Wear protective gloves when mounting, cabling, or doing maintenance operations.
CAUTION
BURN HAZARD FROM HOT SURFACES
Touching surfaces, which are marked with the 'hot surface' sticker, can result in injury.
-Do not touch surfaces which are marked with the 'hot surface' sticker.
NOTICE
DAMAGE TO THE AC DRIVE FROM STATIC VOLTAGE
Some of the electronic components inside the AC drive are sensitive to ESD. Static voltage can damage the components.
-Remember to use ESD protection always when working with electronic components of the AC drive. Do not touch the
components on the circuit boards without proper ESD protection.
Safety
Operating Guide | VACON® NX Inverters FI4-FI8
AQ299433367205en-000101 / DPD00908| 13
Danfoss A/S © 2019.07

NOTICE
DAMAGE TO THE AC DRIVE FROM MOVEMENT
Movement after installation can damage the drive.
-Do not move the AC drive during operation. Use a fixed installation to prevent damage to the drive.
NOTICE
DAMAGE TO THE AC DRIVE FROM INCORRECT EMC LEVEL
The EMC level requirements for the AC drive depend on the installation environment. An incorrect EMC level can damage the
drive.
-Before connecting the AC drive to the mains, make sure that the EMC level of the AC drive is correct for the mains.
NOTICE
RADIO INTERFERENCE
In a residential environment, this product can cause radio interference.
-Take supplementary mitigation measures.
NOTICE
MAINS CONNECTION DEVICE
If the AC drive is used as a part of a machine, the machine manufacturer must supply a mains disconnection device (refer to EN
60204-1).
NOTICE
MALFUNCTION OF FAULT CURRENT PROTECTIVE SWITCHES
Because there are high capacitive currents in the AC drive, it is possible that the fault current protective switches do not
operate correctly.
NOTICE
VOLTAGE WITHSTAND TESTS
Doing voltage withstand tests can damage the drive.
-Do not do voltage withstand tests on the AC drive. The manufacturer has already done the tests.
Safety
Operating Guide | VACON® NX Inverters FI4-FI8
AQ299433367205en-000101 / DPD00908
14 | Danfoss A/S © 2019.07

3 Product Overview
3.1 Introduction
The figure presents the block diagram of the VACON® NX inverter. The inverter mechanically consists of 2 units: the Power Unit and the
Control Unit.
The Power Unit contains an inverter bridge which consists of IGBT switches and produces a symmetrical, 3-phase PWM-modulated AC
voltage to the motor. To protect the DC-link capacitors, the Power Unit also contains a charging circuit for controlled DC-link charge.
Use the B+ and DC-terminals to bypass the charging circuit.
The Motor and Application Control Block is based on microprocessor software. The microprocessor controls the motor based on the
information it receives through measurements, parameter settings, control I/O, and control panel.
The motor and application control block controls the motor control ASIC which, in turn, calculates the IGBT positions. Gate drivers
amplify these signals for driving the IGBT inverter bridge.
3
Power
Unit
Mains
Integrated charging circuit
B+
DC+
DC-
PE
Control
Unit
Control
Panel
Control
I/O
Control
I/O
Control
I/O
Control
I/O
Control
I/O
Motor and
Application
Control
Motor
Control
ASIC
Charge res
IGBT
Inverter Current
Sensors Motor
Fan
Power
Supply
Measure-
ments
Gate
Drivers
Output
EMC-
filter
U
V
W
e30bh433.10
Illustration 1: Block Diagram of VACON® NX Inverter
Product Overview
Operating Guide | VACON® NX Inverters FI4-FI8
AQ299433367205en-000101 / DPD00908| 15
Danfoss A/S © 2019.07

The control panel constitutes a link between the user and the inverter. The control panel is used for parameter setting, reading status
data and giving control commands. It is detachable and can be operated externally and is connected via a cable to the inverter. Instead
of the control panel, a PC can be used to control the inverter when connected through a similar cable (VACON® RS232PC –1.5M).
The basic control interface and the parameters (the Basic Application) are easy to use. If a more versatile interface or parameters are
required, a more suitable application can be selected from the "All in One" Application Package. See the "All in One" Application
Manual for more information on the different applications.
Optional I/O expander boards that increase the number of inputs and outputs to be used are also available. For more information,
contact the Manufacturer or your local distributor.
3.2 Intended Use
The drive is an electronic motor controller intended for:
• Regulation of motor speed in response to system feedback or to remote commands from external controllers. A power drive
system consists of the AC drive, the motor, and equipment driven by the motor.
• System and motor status surveillance.
The drive can also be used for motor overload protection.
Depending on the configuration, the drive can be used in standalone applications or form part of a larger appliance or installation.
The drive is allowed for use in residential, industrial, and commercial environments in accordance with local laws and standards.
NOTICE
In a residential environment, this product can cause radio interference, in which case supplementary mitigation measures can
be required.
Foreseeable misuse
Do not use the drive in applications which are non-compliant with specified operating conditions and environments. Ensure
compliance with the conditions specified in 12.8 Technical Data.
3.3 Manual Version
This manual is regularly reviewed and updated. All suggestions for improvement are welcome.
The original language of this manual is English.
Table 1: Manual and Software Version
Edition Remarks
DPD00908D Structure of the manual changed.
Product Overview
Operating Guide | VACON® NX Inverters FI4-FI8
AQ299433367205en-000101 / DPD00908
16 | Danfoss A/S © 2019.07

3.4 Standard Features of VACON NX Inverters
Table 2: Standard Features of VACON® NX Inverters FI4-FI8
INU
Sales code NXI_AAAA 5/6
Standard features for FI4, FI6, and FI7 DC connection
IP21
Air cooling
Integrated charging
Alphanumeric control panel (in the front end of the module)
I/O modules A1 & A2
Standard board
Safety CE/UL
Sales code NXI_AAAA 5/6
Standard features for FI8 DC connection
IP00
Air cooling
Integrated charging
Alphanumeric control panel (in the front end of the module)
I/O modules A1 & A2
Standard board
Safety CE/UL
3.5 Package Label
The package label gives detailed information about the delivery.
Product Overview
Operating Guide | VACON® NX Inverters FI4-FI8
AQ299433367205en-000101 / DPD00908| 17
Danfoss A/S © 2019.07

A B
H
G
F
E
D
C
I
e30bf961.10
1003322235
V00001687465
NXP00875-A2H1SSS-A1A2000000
171208
B.ID :
S/ N:
Type:
AC DRI VE
V00001687465
7DP-008752-116SC8
Made in Finland
Danfoss A/S, 6430 Nordborg, Denmark
135X9219
87A 40°C / 72A 50°C
87A 40°C / 72A 50°C
45kW:400V / 60HP:480V
IP21/Type1
3~AC,0-Uin, 0-320Hz,
Uin:3~AC,380-500V, 50/60Hz,
POWER :
OUTPUT:
INPUT:
Danfoss Limited
0018131571
NXP00002V195
Ma rks:
Cust. Or d. No :
Appl icat ion :
Firm w are :
7DP-008752-116SC8
Code:
AThe batch ID
CThe type code
EThe mains voltage
GThe protection rating
IThe order number of the customer
BThe order number of VACON®
DThe serial number
FThe nominal output current
HThe firmware code
Illustration 2: Package Label of VACON® NX AC Drives (Example)
3.6 Description of the Type Code
The type code of VACON® is made of standard codes and optional codes. Each part of the type code agrees to the data in the order.
Example:
The code can have this format, for example:
• NXI00035-A2T0SSS-A1A2C30000+DNOT
Table 3: Description of the Type Code
Code Description
VACON This part is same for all the products.
Product Overview
Operating Guide | VACON® NX Inverters FI4-FI8
AQ299433367205en-000101 / DPD00908
18 | Danfoss A/S © 2019.07

Code Description
NXI The product range:
• NXI = VACON® NX Inverter
0003 The drive rating in amperes. For example, 0003 = 3 A
5 The mains voltage:
• 5 = 380–500 V
• 6 = 525–690 V (IEC)
A The control panel:
• A = standard (text display)
• B = no local control panel
• F = dummy keypad
• G = graphical display
2 The protection rating:
• 0 = IP00
• 2 = IP21 (UL Type 1)
• 5 = IP54 (UL Type 12)
T The EMC emission level:
• T = complies with the standard IEC/EN 61800-3 + A1 when used in IT networks (C4).
0The brake chopper: (1)
• 0 = No brake chopper
SSS The hardware changes:
• The supply, the first letter (Xxx):
- C = INU - with integrated charging circuit
- I = INU - no charging circuit
- 2 = AFE module
- 5 = AFE module + LCL filter
- 8 = BCU brake chopper unit
• The mounting, the second letter: (xXx):
- S = Standard air cooled drive
- U = Standard air cooled power unit - external supply for main fan
• The boards, the third letter (xxX):
- S = Direct connection, standard boards, FI4-FI8
- V = Direct connection, varnished boards, FI4-FI8
- F= Fiber connection, standard boards
- G = Fiber connection, varnished boards
Product Overview
Operating Guide | VACON® NX Inverters FI4-FI8
AQ299433367205en-000101 / DPD00908| 19
Danfoss A/S © 2019.07

Code Description
A1A2C30000 The option boards. 2 characters for each slot. 00 = the slot is not used
The option board abbreviations:
• A = basic I/O board
• B = expander I/O board
• C = fieldbus board
• D = special board
For example, C3 = PROFIBUS DP
+DNOT The optional codes. There are many options.
The options that are related to ordering of paper manuals are:
• +DNOT = No paper manuals, only Quick Guide and Safety Guide
• +DPAP = With English paper manuals
• +DPAP+DLDE = With German paper manuals
1Not used for NX Inverters.
3.7 Enclosure Sizes
Example:
The codes for nominal current and nominal mains voltage are part of the type code (see 3.6 Description of the Type Code) on the
package label (see 3.5 Package Label). Use these values to find out the enclosure size of the AC drive from the table.
In the example "NXI00035-A2H1SSS-A1A2C30000+DNOT", the code for nominal current is 0003 and the code for nominal mains
voltage is 5.
Product Overview
Operating Guide | VACON® NX Inverters FI4-FI8
AQ299433367205en-000101 / DPD00908
20 | Danfoss A/S © 2019.07