DAS.4 SG24 User manual

SG24 User Manual

Thank you for choosing our product!
To have a comprehensive understanding and of
how to use using this device and to know all the
features and simple operaon method, please
read this manual rst.
The funcons on the user manual may be a lile
dierent with from the physical product.
The typing errors and discrepancies in this man-
ual will be mely updated. If we have updates,
this manual will be subject to change without
noce. Our company reserves the right of nal
interpretaon.
Package: One gi box, one user manual, one
smart band unit.
Remark: The product is waterproof (IP68),. You
can wear it while washing hands, in the rain, sea
water is prohibited.
Do not use the product when having a hot show-
er. The steam will penetrate the waterproong
and will cause the circuit to burn. All these are
beyond the scope of the warranty

Buons Instrucon:
Top buon: Press the buon to light the screen
from the standby mode. When the screen is o
on, press the buon again to enter the “sports
mode funcon.
Boom buon: Long press the switch buon
to power on the device, then short press the
buon to lighten the screen.
Touch screen instrucons: swipe down to enter
quick sengs: swipe right to enter the noca-
on center: swipe le to enter the main menu.,
swipe up to enter the weather. menu
Changeable band: A small switch push it in the
middle, then can change the band.
Charging instrucon: this product is using
magnec force charging. Supports 5V mobile

phone charger and computer USB interface. Put
the charging cable to the back of the device’s
charging pins, it will charge automacally. It
usually takes 2 hours to fully charge and the de-
vice’s standby me up to 30 days, 5-10 days for
working. Do not use the watch when charging.
Cauon: You should place the magnec
charger correctly at the pins. If the charger is not
properly aligned with the pins, it will cause the
circuit to burn.
The watch can connect with
your phone by downloading the
applicaon “Youth Health” using
one of the methods below.
1) Android / IOS: Scan the QR
code using any scanner, to down-
load the app “Youth Health

2)Android: search and download “Youth health”
app from Google Play;
iOS: search and download Youth health” app
from the App Store;
Aer installaon, turn on cellphone Bluetooth
and Youth health App, conrm the nocaons
and all others permission Youth health asks are
enabled, and ll up personal informaon. Tap
“Add device”, search “L11XXX” device (turn on
the GPS in the smart phone before binding) and
tap connect.
Firmware upgrade: When Bluetooth is con-
nected, in same interface of “Youth health”,
click “More- “Updates”, if there is new rmware
available, click to update to the latest watch
rmware version.
Noce: If it is unsuccessful, please reconnect the
Bluetooth and try to upgrade again.
Because dierent smartphones have dierent
bluetooth versions, the connecon somemes
can be unstable. If you are having dicules,
please restart the bluetooth service and con-
nect to the watch again.

Main Features:
Language/Time/Date
These sengs will be synchronized when
you successfully connect the watch with your
smartphone.
Standby interface: You can change the watch
face by pressing on the screen for 2 seconds
and then selecng the watch face you want.
Status bar: enter the standby interface with
Bluetooth status, QR code (scan with mobile
phone and download “Youth health”), bright-
ness adjustment and baery. percentage
Message When connected, all the incoming
nocaon from the mobile phone, will be
displayed to the watch. You can change what
nocaons you want to receive from the app.
Pedometer- Distance- Calorie: Display the
steps, mileage, calories, Every night at 12 o
‘clock, the data will be saved and reset to 0.
Click to enter the historical record and check it.
Sports:
Click to enter the mulple sports, mode choose
a sport to start, swipe right to enter the pause
screen. For each exercise, there are data such
as exercise me, calorie consumpon, heart
rate etc.

Health
Heart rate: Take a single measurement of your
heart rate. You should see a green light being
emied from the boom of the watch. The nor-
mal heart rate is between 60 to 90 bpm. When
exercising or aer an intense workout, the heart
rate can reach up to 180 bpm.
Blood pressure: When monitoring, please put
your hands at on a surface. the data will come
out aer a few seconds. Blood pressure tends to
increase with age, and women have lower blood
pressure than men.
ECG: The combinaon of opcal heart rate and
electrocardiogram technology takes about a few
seconds to produce the data. When the mea-
surement is completed, the “To APP” interface
will appear. The electrocardiogram is saved on
the mobile phone app “Youth health”, which can
be Shared with others for reference.
Blood Oxygen: SPO2H, it is the percent of oxygen
in blood, normal rate is 94 95-99%.
Sleep monitor: The smart watch will turn on it
turn the funcon on automacally from 9p.m to
9a.m. You can check the details of sleep quality
by connecng the App.

Stopwatch: Press the start and pause icons
accordingly, press pause again to exit
Remote control music: use your smartwatch to
play music through your mobile phone
About: Tap to enter, check device model, rm-
ware version, Bluetooth address etc.
Reset:. Restores factory sengs.
Alarm: Set several alarm clocks through the App
in the phone.
Sedentary Reminder: You can. Enable the func-
on to remind yourself to stand up and avoid
sing for too long.
Find your phone: Tap it and phone makes a
ringtone alert.
Wrist bright screen: Acvate it in the App, Drains
the baery faster when it is on
Units Setup: Metric or imperial system
Data transmission: All the data will be saved
in the device. No maer the measurement

(pedometer, heart rate, sleep quality, and mul-
sport mode), the data. Can be synchronized with
your mobile phone through the APP.
IP68 – Only dustproof and only
accidental contact with fresh
water – hand washing.

www.das-4.com